共查询到20条相似文献，搜索用时 78 毫秒
1.
利用地球物理方法探测地下的地质构造,是工程地质、水文地质、地热调查等领域所考虑的重点之一。通常氡气测量的异常一般直接与地下的构造属性相对应,但无深度信息。CSAMT虽无法确定地质属性,但在确定地下构造的位置、宽度、产状方面具有较高的分辨率。在帕连和法帕进行探测的2个实例表明,组合探测分析可解决花岗岩体的侵入接触关系、背斜轴部灰岩与两翼碎屑岩的断层接触关系,查明发育于可溶岩与非可溶岩的接触面和温泉形成的地质条件,为工程地质病害评价、地热成因分析提供详细的地下地质构造信息。 相似文献
2.
微动探测：地层分层和隐伏断裂构造探测的新方法 总被引：3，自引：0，他引：3
微动探测作为地层分层和隐伏断裂构造探测的物探新方法,已成为盆地结构调查、地热井位选址和隐伏地质构造探测的重要物探手段.微动测深确定岩性差异较大的地质界面,如新生界地层底界、侏罗系与二叠系地层分界面、二叠系-石炭系灰岩顶界面等,深度误差可控制在5％左右.断层破碎带/隐伏断裂构造在微动视S波速度剖面上显示为低速异常或明显的速度差异,易于识别、解释.二维微动剖面技术已在探测隐伏地质构造(断层、陷落柱等)方面取得较好地质效果.本文介绍其原理、方法和应用实例. 相似文献
3.
4.
岩溶区页岩气钻井在近地表常揭露溶洞、地下河、强裂隙带等不良地质体,严重制约了页岩气资源勘探开发的进程。在岩溶页岩气靶区利用地球物理技术探测对钻探不利的近地表地质结构构造,可有效规避钻井钻遇近地表强岩溶发育带、断层破碎带的风险。综合运用高密度电阻率成像法、音频大地电磁法和测氡法对贵州都匀和广西融安碳酸盐岩区的2个油气靶区进行了地下构造识别,结果表明：高密度电阻率成像法和音频大地电磁法能有效确定浅地表地下低阻构造的位置、宽度和产状,高密度电阻率成像法在50 m以浅深度拥有更高的分辨率,音频大地电磁法探测深度更深,但对地下介质的分辨率不高,氡气测量能很好地识别地下低阻构造的属性。高密度电阻率成像法、音频大地电磁法与测氡法三者可优势互补,组成有效识别岩溶区近地表地质结构构造的技术方法体系,可为南方岩溶区页岩气钻井避开近地表强岩溶发育带、断层破碎带以及最终位置的确定提供可靠的技术支撑。 相似文献
5.
支持结构——属性一体化表达的建模方法是三维建模研究的重点和难点之一。已有三维地质建模技术往往存在结构与属性建模过程的割裂，难以实现对地质结构先验知识与属性分析模拟的融合表达。笔者以西咸新区工程地质建模为例，基于多要素精细化探测成果，建立区域统一的地质构造框架模型；在地质构造约束下，充分考虑地质单元特征，精细剖分建模网格，采用随机模拟算法开展属性建模研究，从而实现地质结构约束下的三维属性模型构建。本方法既保留了构造建模对层面的清晰划分,又可以在地层内部更加合理地展现地质属性的空间分布和变化，能够在工程地质勘察和城市地下空间开发等领域得到应用。 相似文献
6.
综合多频率地质雷达天线探测活断层浅层结构——以玉树活动断裂为例 总被引：2，自引：2，他引：0
地质雷达技术具有操作性强、分辨率高、探测深度深、对地表环境无破坏和可重复探测等特点,在活断层探测中具有很大的优势。为验证综合多中心频率地质雷达天线探测活断层地下浅层结构效果,以民主村处发育的玉树活动断裂为研究对象,采用25 MHz、100 MHz、250 MHz和500 MHz中心频率的地质雷达天线对活断层浅层结构进行探测,并与探槽剖面进行效果对比。研究结果表明:低中心频率的地质雷达天线（25 MHz和100 MHz）可获取大范围内深度较深（约32 m）的活断层地下浅层结构的整体形态,从雷达图像上可识别出主断层分布范围、断层倾向及地下浅层结构等;而中高中心频率的地质雷达天线（250 MHz和500 MHz）则可获取局部范围内深度较浅（约3 m）的地下浅层结构,尤其是500 MHz天线。探测结果与地表构造地貌形态和探槽剖面地质构造一致,表明综合多中心频率地质雷达天线探测玉树活动断裂浅层结构的有效性和适用性,为活断层研究提供多尺度数据及方法支持。 相似文献
7.
大同煤田地质构造综合探测技术应用 总被引：2，自引：0，他引：2
随着采煤机械化程度的不断提高，采区设计和工作面的回采越来越受到地质构造的制约。有效使用大地电磁测深、高分辨地震、槽波地震、坑道无线电波透视等勘探技术，收集巷道揭露资料和井下摄影编录资料进行综合分析，结合井下构造力学解析法，对采区及综采或掘进工作面的地质构造进行探测，并应用定向钻进技术对探测结果进行验证。实践证明，这种综合探测技术可有效地探测地质构造及地质异常体。 相似文献
8.
西安及其周围地区是地热异常区.用可控源大地电磁测深方法探测构造及地层,并制作电阻率及地质剖面视图,揭示了测区的构造与地层分布情况.所确定的地热井位通过开采获得成功,取得了良好的地质效果. 相似文献
9.
通过鸡东盆地沉积环境的研究，阐明了地温异常与基底断裂构造，古火山的管道等地质因素的关系，确定了盆地地热类型及盆地高异常区地热的赋存规律及与地下热水的分布关系。 相似文献
10.
构造地质与工程地质的基本关系 总被引：16，自引：0，他引：16
构造地质学是研究各种地质构造及其成生演化的基础地质学 ,工程地质学主要是应用地质学理论尤其是构造地质学理论解决人类工程建设活动中与构造现象和构造活动有密切关系的地质问题的应用地质学。二者的研究目的虽然不同 ,但所研究的主要对象是相同的 ,即都是地质构造 ,所研究的又都是地球变化过程中的构造变动及其各类效应。文中讨论了构造地质学与工程地质学之间的基本关系 ,主要包括地质构造对工程地质环境和工程地质条件的控制作用 ;深部构造、浅部构造以及表层构造动力学特征与区域地壳稳定性之间的关系 ;构造结构面、构造应力场与岩土体稳定性的关系 ;活动构造与工程建筑安全性的关系以及地质构造与崩滑流、地裂缝、地面沉降等地质灾害的关系等问题。 相似文献
11.
Most sulfide-rich magmatic Ni-Cu-(PGE) deposits form in dynamic magmatic systems by partial melting S-bearing wall rocks with variable degrees of assimilation of miscible silicate and volatile components, and generation of barren to weakly-mineralized immiscible Fe sulfide xenomelts into which Ni-Cu-Co-PGE partition from the magma. Some exceptionally-thick magmatic Cr deposits may form by partial melting oxide-bearing wall rocks with variable degrees of assimilation of the miscible silicate and volatile components, and generation of barren Fe ± Ti oxide xenocrysts into which Cr-Mg-V ± Ti partition from the magma. The products of these processes are variably preserved as skarns, residues, xenoliths, xenocrysts, xenomelts, and xenovolatiles, which play important to critical roles in ore genesis, transport, localization, and/or modification. Incorporation of barren xenoliths/autoliths may induce small amounts of sulfide/chromite to segregate, but incorporation of sulfide xenomelts or oxide xenocrysts with dynamic upgrading of metal tenors (PGE > Cu > Ni > Co and Cr > V > Ti, respectively) is required to make significant ore deposits. Silicate xenomelts are only rarely preserved, but will be variably depleted in chalcophile and ferrous metals. Less dense felsic xenoliths may aid upward sulfide transport by increasing the effective viscosity and decreasing the bulk density of the magma. Denser mafic or metamorphosed xenoliths may also increase the effective viscosity of the magma, but may aid downward sulfide transport by increasing the bulk density of the magma. Sulfide wets olivine, so olivine xenocrysts may act as filter beds to collect advected finely dispersed sulfide droplets, but other silicates and xenoliths may not be wetted by sulfides. Xenovolatiles may retard settling of – or in some cases float – dense sulfide droplets. Reactions of sulfide melts with felsic country rocks may generate Fe-rich skarns that may allow sulfide melts to fractionate to more extreme Cu-Ni-rich compositions. Xenoliths, xenocrysts, xenomelts, and xenovolatiles are more likely to be preserved in cooler basaltic magmas than in hotter komatiitic magmas, and are more likely to be preserved in less dynamic (less turbulent) systems/domain/phases than in more dynamic (more turbulent) systems/domains/phases. Massive to semi-massive Ni-Cu-PGE and Cr mineralization and xenoliths are often localized within footwall embayments, dilations/jogs in dikes, throats of magma conduits, and the horizontal segments of dike-chonolith and dike-sill complexes, which represent fluid dynamic traps for both ascending and descending sulfides/oxides. If skarns, residues, xenoliths, xenocrysts, xenomelts, and/or xenovolatiles are present, they provide important constraints on ore genesis and they are valuable exploration indicators, but they must be included in elemental and isotopic mass balance calculations. 相似文献
12.
《Chemical Geology》2007,236(1-2):13-26
We examined the coprecipitation behavior of Ti, Mo, Sn and Sb in Ca–Al–Mg fluorides under two different fluoride forming conditions: at < 70 °C in an ultrasonic bath (denoted as the ultrasonic method) and at 245 °C using a Teflon bomb (denoted as the bomb method). In the ultrasonic method, small amounts of Ti, Mo and Sn coprecipitation were observed with 100% Ca and 100% Mg fluorides. No coprecipitation of Ti, Mo, Sn and Sb in Ca–Al–Mg fluorides occurred when the sample was decomposed by the bomb method except for 100% Ca fluoride. Based on our coprecipitation observations, we have developed a simultaneous determination method for B, Ti, Zr, Nb, Mo, Sn, Sb, Hf and Ta by Q-pole type ICP-MS (ICP-QMS) and sector field type ICP-MS (ICP-SFMS). 9–50 mg of samples with Zr–Mo–Sn–Sb–Hf spikes were decomposed by HF using the bomb method and the ultrasonic method with B spike. The sample was then evaporated and re-dissolved into 0.5 mol l− 1 HF, followed by the removal of fluorides by centrifuging. B, Zr, Mo, Sn, Sb and Hf were measured by ID method. Nb and Ta were measured by the ID-internal standardization method, based on Nb/Mo and Ta/Mo ratios using ICP-QMS, for which pseudo-FI was developed and applied. When 100% recovery yields of Zr and Hf are expected, Nb/Zr and Ta/Hf ratios may also be used. Ti was determined by the ID-internal standardization method, based on the Ti/Nb ratio from ICP-SFMS. Only 0.053 ml sample solution was required for measurement of all 9 elements. Dilution factors of ≤ 340 were aspirated without matrix effects. To demonstrate the applicability of our method, 4 carbonaceous chondrites (Ivuna, Orgueil, Cold Bokkeveld and Allende) as well as GSJ and USGS silicate reference materials of basalts, andesites and peridotites were analyzed. Our analytical results are consistent with previous studies, and the mean reproducibility of each element is 1.0–4.6% for basalts and andesites, and 6.7–11% for peridotites except for TiO2. 相似文献
13.
14.
15.
Hirokazu Fujimaki 《Contributions to Mineralogy and Petrology》1986,94(1):42-45
Concentration ratios of Hf, Zr, and REE between zircon, apatite, and liquid were determined for three igneous compositions: two andesites and a diorite. The concentration ratios of these elements between zircon and corresponding liquid can approximate the partition coefficient. Although the concentration ratios between apatite and andesite groundmass can be considered as partition coefficients, those for the apatite in the diorite may deviate from the partition coefficients. The HREE partition coefficients between zircon and liquid are very large (100 for Er to 500 for Lu), and the Hf partition coefficient is even larger. The REE partition coefficients between apatite and liquid are convex upward, and large (D=10–100), whereas the Hf and Zr partition coefficients are less than 1. The large differences between partition coefficients of Lu and Hf for zircon-liquid and for apatite-liquid are confirmed. These partition coefficients are useful for petrogenetic models involving zircon and apatite. 相似文献
16.
针对兖州煤田下组煤深部开采受奥灰高承压水威胁以及当地大型煤化工企业生产用水量大的现状,在已进行的水文地质勘探及放水试验基础上,评价奥灰富水性,并采用有限差分法进行奥灰疏水降压数值模拟研究,提出水煤共采观点。研究结果表明:兖州煤田深部奥灰水压高,合理布置水煤共采孔,可以实现奥灰水位的有效疏降,疏降中心区水位最大降深可达110 m,突水系数显著下降,提高了下组煤开采的安全性;同时可提供煤化工43200 m3/d的供水量,能达到可持续的、水资源保护性的供水效果,实现下组煤的水煤共采。 相似文献
17.
The distribution of Cu, Co, As and Fe was studied downstream from mines and deposits in the Idaho Cobalt Belt (ICB), the largest Co resource in the USA. To evaluate potential contamination in ecosystems in the ICB, mine waste, stream sediment, soil, and water were collected and analyzed for Cu, Co, As and Fe in this area. Concentrations of Cu in mine waste and stream sediment collected proximal to mines in the ICB ranged from 390 to 19,000 μg/g, exceeding the USEPA target clean-up level and the probable effect concentration (PEC) for Cu of 149 μg/g in sediment; PEC is the concentration above which harmful effects are likely in sediment dwelling organisms. In addition concentrations of Cu in mine runoff and stream water collected proximal to mines were highly elevated in the ICB and exceeded the USEPA chronic criterion for aquatic organisms of 6.3 μg/L (at a water hardness of 50 mg/L) and an LC50 concentration for rainbow trout of 14 μg/L for Cu in water. Concentrations of Co in mine waste and stream sediment collected proximal to mines varied from 14 to 7400 μg/g and were highly elevated above regional background concentrations, and generally exceeded the USEPA target clean-up level of 80 μg/g for Co in sediment. Concentrations of Co in water were as high as in 75,000 μg/L in the ICB, exceeding an LC50 of 346 μg/L for rainbow trout for Co in water by as much as two orders of magnitude, likely indicating an adverse effect on trout. Mine waste and stream sediment collected in the ICB also contained highly elevated As concentrations that varied from 26 to 17,000 μg/g, most of which exceeded the PEC of 33 μg/g and the USEPA target clean-up level of 35 μg/g for As in sediment. Conversely, most water samples had As concentrations that were below the 150 μg/L chronic criterion for protection of aquatic organisms and the USEPA target clean-up level of 14 μg/L. There is abundant Fe oxide in streams in the ICB and several samples of mine runoff and stream water exceeded the chronic criterion for protection of aquatic organisms of 1000 μg/L for Fe. There has been extensive remediation of mined areas in the ICB, but because some mine waste remaining in the area contains highly elevated Cu, Co, As and Fe, inhalation or ingestion of mine waste particulates may lead to human exposure to these elements. 相似文献
18.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
19.
Todd Dunn 《Contributions to Mineralogy and Petrology》1987,96(4):476-484
The crystal/liquid partition coefficients of Lu, Hf, Ti, Mn and Ca have been measured between olivine, clinopyroxene and basaltic melt. The Ti, Mn, and Ca partition coefficients were determined at natural abundance levels. The Lu and Hf partition coefficients were determined at doping levels ranging from 0.5 to 1.5 wt% “trace element” as oxide in order to allow analysis by electron microprobe. Olivine/liquid partition coefficients for Lu, Hf, Ti, Mn, and Ca were determined at 1 bar and temperatures from 1150 to 1177° C. Clinopyroxene/liquid partition coefficients were determined for Lu, Hf, Ti, and Mn at pressures of 10, 15, and 20 kbars and temperatures from 1250 to 1290° C. The olivine/liquid partition coefficients of Hf, Lu, Ti, and Ca are small. D(Hf-ol) is zero within the analytical uncertainty. Both D(Lu-ol) and D(Mn-ol) decrease with increasing temperature, but D(Ti-ol) and D(Ca-ol) are constant over the narrow temperature range studied. The partition coefficient results are summarized below.
| T°C 相似文献
20.
Stratiform quartz-sulphide lodes in Ingladhal occur in a typical Precambrian green-stone-belt environment comprising metabasalts, tuff, chert and cherty iron-sulphide formation. Unusually high cobalt contents of metavolcanics and of sulphide minerals in orebodies suggest a consanguinity between ores and rocks. 90% of total nickel, 70% of total cobalt but only 30% of total copper in rocks occur in silicate phases and thus indicate an early separation of copper from cobalt and nickel. Unusually high non-sulphide copper in barren bedded cherts implies availability of Cu-rich solution prior to their lithification. Pyrite in sediments, in volcanics, and in orebodies is characterized by a distinctive pattern of Co-Ni distribution in each case. Partitioning of Co and Ni between coexisting sulphide pairs is complex, but gross equilibrium is indicated. Very high trace metal content of orebody pyrite sharply contrasts with very low such values in pyrite from adjacent sediments and points to a higher temperature of formation of orebodies. 相似文献
|
|---|