共查询到20条相似文献，搜索用时 109 毫秒
1.
2.
【研究目的】土壤重金属污染是造成土壤生态环境质量下降、农作物重金属超标,甚至危及人体健康的主要因素。采矿及冶炼活动是土壤重金属污染的主要来源,中国矿山贫矿多、难选矿多、共伴生矿多,矿山开采过程中产生了大量的有毒有害重金属进入土壤,由于采矿活动造成土壤重金属污染严重。目前,寻找合适的方法修复矿区重金属污染土壤是国内外环境科学领域研究的热点和难点。【研究方法】本文通过查阅大量矿区重金属污染土壤修复技术方向的文献,综述了国内外关于矿区土壤中重金属污染的特点、危害及修复技术最新研究进展。【研究结果】目前矿区土壤重金属污染的修复方法包括：（1）工程修复技术：客土法;（2）物理修复技术：电动修复法、玻璃化法、热处理法等;（3）化学修复技术：土壤淋洗法、固定/稳定化法等;（4）生物修复技术：植物修复法、微生物修复法等。【结论】目前客土法是使用较广、最有效的处理技术,植物修复技术是应用前景最好的技术。在实际矿山重金属污染土壤修复中,单一的修复技术往往存在一定的局限性而不能满足修复需求,因此可采用多种修复技术相结合的联合修复方法相互补充,以达到最佳修复效果。 相似文献
3.
矿山-河流系统中重金属污染的地球化学研究 总被引：4，自引：0，他引：4
立足于矿山及纳污河流生态系统,从重金属污染源研究入手,分析了尾矿重金属淋滤释放规律和影响因素;阐述了重金属在矿山及相关河流系统中的迁移、转化和富集过程及其对生态环境的影响;总结和评述了现有的矿山环境重金属污染的评价方法,指出了今后的研究重点:努力减少尾矿中重金属向环境释放,逐步实现矿床的无废开采;设计不同条件和影响因素下的尾矿淋滤实验,加强酸性废水和尾矿重金属淋滤释放规律的研究,建立酸性矿山废水和重金属释放的预测模型;运用微量元素、稀土元素和高精度的Pb、S同位素测试手段,示踪重金属的来源及其运移途径;运用3S技术和高新技术手段提取和识别环境地球化学信息,加强矿山-河流系统重金属污染及其生态环境影响的监测;运用地球化学工程技术和植物修复技术治理矿山环境及其影响流域的污染。 相似文献
4.
富镉铅锌矿山的环境影响——以贵州都匀牛角塘矿床为例 总被引：4，自引：0，他引：4
矿床的开采和选冶,常常将其中重金属有毒元素释放到环境中,铅锌矿造成的环境污染尤为严重。贵州都匀牛角塘矿床是国内外少见的富镉锌矿床,其中镉高度富集。本文通过对通过对矿区水、土壤及植物的分析和调查,发现其中镉和锌均已远远超过国家标准,矿区周围环境已受到严重污染。研究表明矿床的表生风化作用是镉等重金属释放的主要途径之一,更重要的是矿山的采矿和选矿更加剧了其释放量,虽在目前人群中没有明显中毒现象,可能是由于矿床开采时间较短,Cd等重金属元素在人体中积累不多所致。但矿山环境污染是污染元素长期积累造成的结果,即使在矿山关闭十年、上百年甚至上千年时间内,矿山尾矿淋滤液对环境生态的影响依然存在。因此,在矿山开发过程中必须注意矿床中有用元素的综合利用和重视环境保护,防患于未然。特别是对这类富含有毒污染元素的金属矿山的开采更应如此。 相似文献
5.
矿床的开采和选冶，常常将其中重金属有毒元素释放到环境中，铅锌矿造成的环境污染尤为严重。贵州都匀牛角塘矿床是国内外少见的富镉锌矿床，其中镉高度富集。本文通过对通过对矿区水、土壤及植物的分析和调查，发现其中镉和锌均已远远超过国家标准，矿区周围环境已受到严重污染。研究表明矿床的表生风化作用是镉等重金属释放的主要途径之一，更重要的是矿山的采矿和选矿更加剧了其释放量，虽在目前人群中没有明显中毒现象，可能是由于矿床开采时间较短，Cd等重金属元素在人体中积累不多所致。但矿山环境污染是污染元素长期积累造成的结果，即使在矿山关闭十年、上百年甚至上千年时间内，矿山尾矿淋滤液对环境生态的影响依然存在。因此，在矿山开发过程中必须注意矿床中有用元素的综合利用和重视环境保护，防患于未然，特别是对这类富含有毒污染元素的金属矿山的开采更应如此。 相似文献
6.
对比研究矿山开采一定时段内区域环境污染的时空变化特征,对于动态监测矿山开采对区域环境质量的影响情况、污染趋势等,具有重要的科学意义和实际价值。本文在利用2004年野外采集与测试分析的330个水系沉积物样品重金属含量数据基础上,充分利用矿山开采早期(1989)的1:20万乐平幅(As、Hg、Cd、Cr、Zn、Cu、Pb)水系沉积物地球化学图,通过数据预处理,分别对样品采集点重金属元素含量的统计分析和地质累积指数法评价的基础上,采用GIS的三维空间分析功能,对比研究德兴地区水系沉积物重金属污染时空变化。研究结果表明,十几年来,矿山开采对区域水系沉积物已造成了严重的污染,主要集中分布在是德兴铅锌和铜钼矿区德兴河与大坞河流域及其周边地区、乐安河下游沿岸局部地区、西北煤矿区以及乐安河下游乐平附近的煤矿区。 相似文献
7.
为研究青藏高原金属矿山勘探、开采、闭坑阶段不同开发阶段河流重金属污染的严重程度,通过野外调查,室内测试分析,对比5个金属矿山河流重金属元素含量、污染指数沿程变化,得出以下结果:(1)勘探阶段和闭坑后河流水质污染较小,开采阶段矿业活动对河水水质污染较大。(2)As、Pb、Cd、Cu和Zn五种元素是金属矿山的特征污染物。开采矿区中德尔尼铜矿区、下柳沟铅锌矿、甲玛矿区河流均有重金属元素污染,微碱性环境中德尔尼铜矿区,主要污染物为As,单项污染指数为0～10.6;下柳沟铅锌矿Pb、Cd、Cu和Zn元素单项污染指数分别为0.2～2.1、0～55、0.4～24、0.3～1550;偏酸性环境中甲玛矿区的特征污染物主要为Cu、Cd。其中Cu、Cd单项污染指数为0～4174、0～4;勘探矿区大场金矿、闭坑矿区罗布莎铬铁矿区河流未出现污染元素。(3)青藏高原5处典型的高海拔山地矿山河流由于稀释作用重金属流经2km后达到安全水平,研究结果可为青藏高原矿山开采中河流水环境保护提供参考依据。 相似文献
8.
9.
华南地区含硫化物金属矿山生态环境中的重金属元素地球化学迁移模型——重点对粤北大宝山铁铜多金属矿山的观察 总被引：7，自引：1，他引：6
粤北大宝山是华南金属成矿带的大型铁铜、铅、锌、钼等多金属综合性矿床,富含硫化物,位于北江支流横石河的上游分水岭,流域封闭性很好。矿山开发引起横石河下游的上坝村成为远近闻名的"癌症"村,部分村民出现"痛痛病"疑似症状。由于其特殊的地理位置和对下游引发的严重污染,该矿山成为研究湿热地区含硫化物金属矿山重金属元素生态-环境地球化学迁移的理想场所。以Zn为例,该矿山重金属元素从矿体中向生物体迁移过程经过尾砂/水反应界面、水/沉积物反应界面、土壤/间隙水溶液界面和土壤/植物界面4个重要的反应界面。其中,尾砂/水反应界面控制重金属从源头尾砂中的释放;水/沉积物反应界面控制重金属在水体中与河流沉积物的沉淀与释放的平衡;土壤/间隙水溶液界面控制土壤生物有效性;土壤/植物界面控制生物对重金属的吸收与利用。4个界面的介质间相互作用较好地刻画大宝山矿山因为开采,重金属元素从内生环境中曝露出来,然后在表生环境中释放、迁移、转化、归宿的迁移模式。上述认识对矿山重金属污染治理具有重要的指导意义。通过改变重金属迁移反应界面的条件,可以阻断矿山元素的迁移,达到污染治理的目的。 相似文献
10.
以陕西潼关、大柳塔及辽宁阜新矿区为例,采用对比分析的方法研究矿产资源开发中矿山地质环境问题差异性响应的主要因素。上述3个矿区矿产资源开发中矿山地质环境问题主要包括：20世纪90年代以前,陕西潼关金矿区是中国矿产资源开发秩序十分混乱的矿区之一,地下开采的采矿废石随意堆排导致了极为严重的矿山泥石流地质灾害及其隐患,＂三废＂无序排放导致土壤、河水及其底泥的重金属及氰化物污染严重,严重影响人体健康;地处生态环境脆弱带的陕西大柳塔煤矿区,20年大型机械化地下煤炭资源开采导致大面积地面塌陷及其链生的地下水含水层破坏严重,但矿区土地沙漠化程度总体没有呈现加重的趋势,水土环境重金属呈轻度污染;具有百年开发历史的辽宁阜新煤矿区,露天开采使土地生态破坏严重、边坡滑坡灾害频发、土地压占与破坏突出,地下开采引起的地面塌陷对地表建筑物及人居安全影响严重,但相对于金属矿区,该矿区水土环境重金属污染相对轻得多。对比上述3个矿区矿山地质环境问题,得到其差异性响应主要因素：矿产资源种类、原生地质环境条件、开采方式及矿山环境保护意识等。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献