共查询到20条相似文献，搜索用时 62 毫秒
1.
在综合分析凤-太矿集区成矿构造特征的基础上，依据以往总结的凤．太矿田铅锌、金矿聚矿构造模式，通过对八方山-二里河铅锌矿床地质特征的分析，总结了找矿标志，初步认为八方山-二里河（铜）铅锌矿床的成矿模式为：“前泥盆纪海底热水喷流沉积一印支-燕山期构造改造型”铅锌矿床。认为成矿物质来源于基底，后期的构造-岩浆改造使基底成矿元素活化，沿同生断裂迁移、改造，最后在泥盆系中形成的扩容性构造部位富集成矿。提出了下一步扩大找矿的方向和建议。 相似文献
2.
西秦岭造山带东段西成矿田内发育一系列泥盆纪的喷流沉积型（SEDEX）铅锌矿床,甘肃徽县洛坝铅锌矿床就是其中的代表型矿床之一。它产于中泥盆统安家岔组焦沟层上部,矿体分布受洛坝背斜和南、北两翼断裂控制,与地层产状基本一致,矿石主要为纹层状、层状、浸染状、块状构造。经过详细的显微构造和SEM扫描电镜分析,鉴定出与喷流沉积有关的通道构造、淬火构造等。矿床地球化学分析显示,该矿床赋矿围岩的Ba、As、Sb、B、Ag、Hg等喷流沉积指示元素值均较高,且两者均具有LREE相对富集、明显的Eu正异常和中等Ce正异常特征,对比表明,成矿流体中的REE主要继承赋矿围岩（硅质岩）。矿床包裹体及硫同位素分析表明：成矿温度为168~350℃,以中、高温为主;早期矿化硫化物的δ34S值（平均9.8‰）明显大于晚期矿化硫化物的δ34S值（平均5.6‰）,说明后期改造作用中有地层硫的参与。综合研究表明,该矿床为热水喷流沉积型铅锌矿床,后期又受到海西期-印支期的叠加改造,并确定该矿床为秦岭后造山期板内伸展热水喷流的产物,最后建立了洛坝铅锌矿床热水喷流沉积成矿模式。 相似文献
3.
4.
5.
通过实地地质调查和取样测试,对二里河铅锌矿床进行标型矿物微量元素、围岩稀土元素地球化学特征、流体包裹体特征分析。结果表明：二里河铅锌矿床具有海底热水喷流沉积矿床一般地质特征,多期（华力西期＋印支期）构造运动和幅度较大的裂陷发育史为大量矿质的喷流和聚集提供了十分有利的导矿和容矿构造条件。标型矿物微量元素地球化学特征显示：闪锌矿明显富集Cd（（6 493.74～7 225.68）×10-6）,贫Sb、As,黄铁矿w（S）与w（Se）比值为23 443.48～250 284.36,w（Co）与w（Ni）比值为3.47～104.10,指示矿床具热水沉积特征,而黄铁矿w（Fe）/（w（S）＋w（As））为0.87～1.52,表明该矿为浅部成因矿床;流体包裹体特征、围岩和闪锌矿稀土元素显著亏损Eu、Ce,指示二里河铅锌矿床可能具有喷流沉积型矿床远源矿化特征;log（δCe）为-0.04～0.04,表明二里河铅锌矿床围岩在还原环境下成岩;石英流体包裹体均一温度及闪锌矿成分指示的温度范围（215℃～333℃）特征表明该矿床为中温矿床。综上所述,二里河铅锌矿床可能为相对远离喷流口的喷流沉积型浅层中温层状矿床。 相似文献
6.
广南木利锑矿床为—产于下泥盆统坡脚组中段硅质岩中的热水沉积一改造富集而成的层控矿床。受下列因素控制：①大陆边缘裂谷带中由深大断裂（那外－西洋江断裂和富宁断裂）控制的断陷槽为热水沉积作用提供了古构造和古地理条件；②坡脚组中段的热水沉积硅质岩富含锑，是成矿的物质基础，并在局部由沉积。成岩作用成矿；③背斜构造为主要控矿构造，矿体主要产于背斜核部虚脱空间；④硅化与矿化关系密切，强硅化作用有利于富矿体的形成。 相似文献
7.
8.
九子沟铜矿是凤县-太白铅锌多金属矿集区近年来发现的新矿床。矿化类型主要表现为硅质岩型、硅化灰岩型和石英-方解石脉型。矿体主要呈层状、似层状、透镜状与围岩整合产出,且多被后期顺层或切层含矿石英-方解石脉交代,形成富矿体。综合地质特征和地球化学特征,认为该矿床成因类型为喷流沉积-改造型铜矿。九子沟等铜矿床（点）与区域上的铅锌矿床构成了热水喷流沉积矿床的元素分带模式。这一发现,指示今后该地区可在热水喷流沉积矿床元素分带模式的基础上,结合区带内背斜控矿的地质特征开展找矿工作。 相似文献
9.
陕西省凤太矿集区二里河铅锌矿床的成矿时代: 来自闪锌矿Rb-Sr同位素年龄的证据 总被引：9，自引：4，他引：5
八方山-二里河铅锌矿床位于陕西凤县-太白(简称凤太)矿集区西北部,矿体主要产于中泥盆统古道岭组与上泥盆统星红铺组接触带中,受NWW向八方山-二里河背斜控制。本次工作对二里河铅锌矿床主成矿阶段的闪锌矿进行了Rb-Sr同位素测年研究,获得了等时线年龄为220.7±7.3Ma,表明矿床形成于晚三叠世,该年龄对于整个凤太矿集区的铅锌成矿时代具有同样约束意义。闪锌矿的87Sr/86Sri值为0.714145±0.000031,指示成矿物质可能主要来源于大陆壳。结合前人的研究成果分析认为,二里河铅锌矿床是凤太矿集区在印支期区域性强烈的构造-岩浆-成矿作用过程中的产物。 相似文献
10.
扬子地块北部被动边缘的南秦岭古生代沉积盆地中,发育一套自早古生代—中生代以来的碳酸盐岩夹细碎屑岩沉积建造,形成规模巨大独具特色的以铅锌金为主的多金属成矿带。伸展构造体制下形成的裂陷或断陷型盆地中,正常水成沉积与热水沉积同盆共存。正常水成沉积中叠加的热水沉积是一个"突发事件或灾变事件",具有特殊的物质组成和产态。通过对区内沉积成矿盆地的识别、分级,二级沉积盆地中边缘部位常发育多个三级构造热水沉积成矿盆地,它受控于沉积盆地中的同生断裂,具有沉积岩相、热水沉积岩组合、显著成矿作用及物化探异常广布的特点。三级构造热水沉积成矿盆地是矿床定位的构造空间,四级热水沉积洼地为矿体(矿层)的容纳空间。区内热水沉积岩主要为重晶石(毒重石)岩、硅质岩、钠长石岩和铁碳酸盐岩类,铅锌重晶石等矿产多产于热水沉积岩中或上盘。热水沉积形成一般由早期的热水喷发交代→主期热水喷流→晚期热水喷气演变。早期的热水喷发交代往往沿矿液喷发通道,形成网脉状、角砾状矿化;主期热水喷流主要形成多金属及热水喷流相,形成块状、条带状、层纹状矿石或热水沉积岩;晚期热水喷气主要形成浸染状矿石和热水喷气岩石。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献