首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
青藏高原昆仑—汶川地震系列与巴颜喀喇断块的最新活动   总被引:23,自引:1,他引:22  
青藏高原是中国最主要的地震活动区之一。最近十多年来,在青藏高原中部连续发生了1997年西藏玛尼Ms7.5级地震、2001年青海昆仑山Ms8.1级地震、2008年3月新疆于田Ms7.3级地震和5月四川汶川Ms8.0级地震及2010年青海玉树Ms7.1级地震,它们相继发生于青藏断块区巴颜喀喇断块四周边界活动断裂带上,是该断块最新活动的结果。发生于断块南北边界断裂上的3次地震都是走滑断裂错动的结果,发生在断块东南端的汶川地震则是挤压逆冲断裂的产物,而西北端的于田地震则呈现出张性特征,它们共同反映青藏断块区巴颜喀喇条状断块向东南方向滑动的最新活动。自1900年以来,青藏断块区和巴颜喀喇断块的强震活动表现出多期活动和区域性转移的特征,20世纪早期Ms7.0级以上强地震活动的主体地区在青藏断块区北部边界构造带,中期转移到高原南部喜马拉雅板块边界构造带和断块区南部断块,最近十多年来则在巴颜喀喇断块及周缘边界断裂上活动。青藏高原这种块体活动和地震活动与澳大利亚-印度板块对亚洲大陆的推挤作用相关,因而,青藏高原和巴颜喀喇断块的强震活动与澳-印板块边界苏门答腊强震活动相对应。目前苏门答腊地区强震活动仍在继续,因此,近期对巴颜喀喇断块及青藏高原南部地区的强震活动和强震危险性仍需加以注意。  相似文献   

2.
四川芦山2013年Ms7.0地震发震构造初步研究   总被引:3,自引:0,他引:3  
2013年4月20日8时2分,四川龙门山断裂带的雅安芦山发生Ms7.0级地震,震中位于芦山县太平镇和双石镇之间,震源深度13~14km,震中最大烈度达IX级。震中区野外调查发现,尽管房屋建筑损坏较严重,但这次地震没有产生明显的地表破裂构造,仅见少量的地裂缝和喷砂冒水现象。高分辨率遥感图像解译、主余震分布、震源机制解等综合分析认为,该地震是龙门山断裂带西南段一次独立的破裂事件,属于逆冲型地震,沿双石-大川断裂中南段发生破裂,主破裂面西倾,倾角33°~43°,推断芦山地震与龙门山构造带底部滑脱带(13~19km)断坡构造活动有关。历史上,沿双石-大川断裂发生至少2次Ms6~6.5级地震,由此认为芦山地震是龙门山断裂带西南段特征型地震,与汶川地震不同。原地地应力测量和监测数据表明这是汶川地震后龙门山断裂带西南段应力释放的结果。  相似文献   

3.
一、地震基本参数表1 地震基本参数表发震时间年月日时分秒震 中 位 置微 观宏 观东经北纬东经北纬参考地名震级(MD)震源深度(Km)震中烈度 地震类型 1987080217071157°251°115°38′24°59′江西寻乌56178Ⅶ震群  微观震中与宏观震中不吻合,两者相距15Km左右,前者位于Ⅶ度极震区的外围的澄江附近。(图10-1)。图10-1 1987年8月2日寻乌地震等震线图二、地震烈度分布本次地震的宏观震中位于寻乌县城关北西3公里的文峰乡长举村附近,震中烈度Ⅶ度(图10-1)。Ⅶ度区(极震区):Ⅶ度等震线包围了寻乌县城关长宁镇及文峰乡的下河岭…  相似文献   

4.
地震烈度是按一定的宏观标准来表示它对地面的影响和破坏程度的,常用I表示.极震区是指破坏程度最重的地区,即震中地区,该处的烈度称为震中烈度,以I_0表示.一般烈度分为12度.地面上各烈度相同点的联线叫等震线.根据各次地震的等震线可以粗略地确定各该次地震  相似文献   

5.
2017年8月8日四川省九寨沟县发生Ms7.0级地震,构造部位处于青藏高原东缘的巴颜喀拉地块东北角,震中位置是岷江断裂、塔藏断裂、虎牙断裂和雪山梁子断裂围闭的空震区。哪条断裂发震,如何界定其与周边活动断裂的关系,与青藏高原东缘近年来发生的大地震是否有成因联系等问题对于理解该区域现今构造活动模式、预判地震发展趋势和部署地震地质灾害防控等工作具有重要意义。利用地震前后两期Sentinel-1合成孔径雷达数据对地表同震形变场进行了InSAR测量,获取了极震区约2000 km2范围内的雷达视线向变形(-13~28 cm)和运动方向,呈现为主动盘单侧走滑兼逆冲的变形模式,结合震源机制、断裂展布、构造背景和近年地震迁移的分析,揭示了控震构造是巴颜喀拉地块北缘边界断裂弧形旋转体系的尾端构造,发震断层是该断裂系中塔藏断裂的南段,并有与虎牙断裂贯通的趋势,因此,应重视本次地震与虎牙断裂之间的空震区未来的强震危险性问题;从区域上看,此次九寨沟地震可能与汶川地震具有一定的时空成因联系,因在巴颜喀拉地块南北边界断裂破裂基本贯通的条件下,2008年汶川地震诱发的东缘中部锁固破裂导致块体加速向东挤出,2013年鲁甸地震又释放了东缘南段挤压构造应力,从而进一步加剧了东北角的应力集中,促使九寨沟地震的发生。  相似文献   

6.
一、上海及其邻近地区地震活动特点上海及其邻近地区在地震区划上属于华北地震区东南边缘的下杨子地震小区(北迄盱贻——响水口断裂,西至郯城——庐江断裂南缘,南以宁波——皖南东西向断裂带与华南地震区毗邻,东达海域)。自汉代有地震记载以来至1986年上半年,震中位于本区的 Ms≥3的地震事件千余次,其中震中烈度≥Ⅵ度或震级 Ms≥4(2/3)级的地震共七十余次,最大地震海域部分为7级(1846年南黄海)、陆上部分为6(1/4)级(1624年扬州),最大地震烈度只有Ⅷ度(1624年扬州,1979年溧阳),在≥6级的20次地震中,震中在南黄海的就占了80%,  相似文献   

7.
一、地震基本参数表1 地震基本参数表发震时间年月日时分秒震 中 位 置微 观宏 观东经北纬东经北纬参考地名震级(MS)震源深度(Km)震中烈度 地震类型 196804011705051181°247°117°32′24°54′华安新圩52Ⅵ+主余震型  宏观震中是取Ⅵ度等震线的中心位置,位于华安县新圩南,与微观震中有较大偏离,微观震中在同安县城西南,两者之间相距约60公里。二、地震烈度分布本次地震发生于我省地震队伍成立之前的1968年,现场调查工作在三年之后才补充进行。由于极震区的烈度达Ⅵ度强,民房遭受一定程度的损坏,故震中及Ⅵ、Ⅴ度等震级的确…  相似文献   

8.
2014年10—12月期间,云南景谷接连发生了Ms6.6、Ms5.8、Ms5.9三次中-强地震。为确定地震的地质构造成因,在地表调查的基础上,综合该区的地质构造情况、烈度与余震分布、震源机制解等资料,确定此次震群活动的宏观震中位于永平盆地东南侧山地,发震断层为地质与地貌表现不显著的NW向右旋走滑断层。此次震群活动及余震迁移过程指示,由于断层斜接部位岩桥的临时阻碍,Ms6.6地震破裂在向南东扩展过程中发生短暂停滞,突破障碍后进一步引发了Ms5.8和Ms5.9地震,这符合震源破裂沿NW向发震断裂分段破裂的行为。区域活动断裂的遥感解译结果发现,发震断层位置恰好处于NW向右旋走滑的茶房断裂与普文断裂之间,区域上属于该断裂带的不连贯部位,指示此次中-强震群活动应该是茶房-普文断裂带贯通过程的构造活动表现。结合思茅地块的历史地震资料发现,思茅地块地震活动多以小于等于6.8级为主,发震构造多为NW向断裂。指示在现今构造应力场作用下,该区NW向断裂的活动性相对NE向断裂更加显著,属于该区主要控震构造,应在今后的地震地质工作中给予更多关注。  相似文献   

9.
在西藏安多地区进行活动断裂研究过程中,进行地表调查和探槽开挖,证实错那-安多地堑北缘主边界断裂上的最新地表断层陡坎实际是该区史前大地震的地表遗迹。根据地表观察和实地测量结果可知,该区最新古地震断坎的延伸范围可达 26~36km,平均垂直位移量达 1.0~1.4m。相关地层-地貌体的年代学测试结果和古地震破裂参数表明,最新的古地震发生在距今约 10.0~8.1ka期间,估计当时的古地震震级介于 6.9~7.3级之间,当时的极震区烈度可能≥Ⅸ度。此古地震破裂的发现表明,青藏高原中部正断层型大地震之后的沉寂时间可以长达近万年,明显长于藏南裂谷带上的正断层型古地震活动间隔。由于安多地区最新大地震之后的离逝时间已足以积累类似强度的大地震,因此,该区未来的大地震危险性较高。  相似文献   

10.
一、地震基本参数表1 地震基本参数表发震时间年月日时分秒震 中 位 置微 观宏 观东经北纬东经北纬参考地名震级(MS)震源深度(Km)震中烈度 地震类型 199705311451117°11′25°35′117°11′25°34′永安西南526Ⅵ前主余震型  宏观震中与微观震中基本吻合,稍偏南1分。二、地震烈度分布本次地震震中位于永安市小陶镇张家山一带,震中烈度Ⅵ度强。Ⅵ度区:为极震区。Ⅵ度等震线北起永安市小陶镇大陶村,东至漳平市的赤水镇,南经龙岩市新罗区万安镇的安前村,西到连城县曲溪镇的古白石村,呈长轴北东走向的准椭圆形。长轴长38公里,短…  相似文献   

11.
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.  相似文献   

12.
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提  相似文献   

13.
本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。  相似文献   

14.
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.  相似文献   

15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.  相似文献   

16.
本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。  相似文献   

17.
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.  相似文献   

18.
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.  相似文献   

19.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.  相似文献   

20.
岩石密度和超高压岩石折返速率   总被引:1,自引:3,他引:1  
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号