首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 93 毫秒
1.
蒋忠祥 《地质与勘探》2022,58(5):965-974
近年来,新疆西准噶尔巴尔鲁克地区发现的苏云河钼矿、加曼铁列克得铜矿、石屋铜金矿等斑岩型矿床,为研究巴尔喀什斑岩型成矿带是否延伸至我国新疆西准噶尔一带提供了新的研究方向。其中苏云河钼矿是该区最大的斑岩型矿床,赋矿岩体为二长花岗斑岩,目前对于该含矿斑岩体的空间形态及规模认识不足。本文以西准噶尔巴尔鲁克山一带区域重力为研究对象,针对苏云河钼矿含矿岩体开展重力三维反演,从构造环境、含矿岩体、成矿年龄等方面对比分析苏云河钼矿与哈萨克斯坦阿克斗卡铜矿的相似性。结果表明,苏云河含矿斑岩体深部最长约9.4 km,最宽约3 km,垂向延伸超过2.2 km,直观展示了苏云河含矿岩体的规模及空间形态,巨型岩体的存在表明深部仍有广阔的找矿空间。此外,巴尔鲁克山一带的重力场反映了西准噶尔洋残余盆地的特征,证实该区在晚石炭世处于俯冲拉伸相关的岛弧环境,为哈萨克斯坦巴尔喀什成矿带向东延伸到我国新疆西准噶尔一带提供了地球物理证据。  相似文献   

2.
新疆西准噶尔苏云河钼矿床成矿流体和成矿时代   总被引:7,自引:3,他引:4  
苏云河钼矿位于新疆北部西准噶尔巴尔鲁克山西段,隶属于巴尔鲁克山成矿带,由3个花岗岩体组成,矿体主要位于与岩体接触的凝灰岩地层中。辉钼矿的Re-Os模式年龄为293.3±4.0Ma~296.8±4.3Ma,等时线年龄为294.4±1.7Ma,加权平均年龄为295.0±1.5Ma,表明矿化发生于早二叠世。苏云河钼矿床的石英脉中发育3种类型的包裹体:富液相包裹体、富气相包裹体和含子晶多相包裹体。研究表明,与3个岩体矿化有关的流体具有类似特征,均可以分为3个阶段。早阶段三种类型的包裹体均发育,均一温度491℃,盐度58.6%Na Cleqv,密度1.15g/cm3,具有高温、高盐度、高密度的特征,属Na Cl-CO2-H2O体系。中阶段发育富液相包裹体和富气相包裹体,均一温度为240~443℃,盐度为1.7%~21.0%Na Cleqv,密度为0.38~1.03g/cm3,为中高温、中低盐度、中低密度流体,属Na Cl-CO2-CH4-H2O体系。晚阶段仅发育富液相包裹体,均一温度为153~239℃,盐度为9.6%Na Cleqv,密度为0.81~0.94g/cm3,为中低温、低盐度、中低密度流体,属Na Cl-H2O体系。石英包裹体中水的氢氧同位素研究表明早阶段的成矿流体以岩浆水为主,中阶段和晚阶段为岩浆水和大气水的混合水,并且随着流体演化,大气水所占的比例逐渐升高。除此之外,综合流体包裹体和氢氧同位素地球化学特征表明流体沸腾作用和混合作用是引起苏云河钼矿床矿质沉淀的主要因素。  相似文献   

3.
滨南钼矿位于大兴安岭成矿带,为近年来发现的燕山期中型斑岩型钼矿床。为探讨矿区赋矿岩体的成因,岩体构造环境及成岩成矿关系,对赋矿围岩花岗岩进行了岩石地球化学分析。该花岗岩的锆石U-Pb年龄为155 Ma±1.5 Ma,表明该花岗岩的侵位年龄为晚侏罗世。在地球化学组成上,该花岗岩具有高w(SiO_2)(70.79%~73.35%)、高w(K_2O)(3.23%~4.79%)、低w(P_2O_5)(0.08%~0.11%)、低w(TiO_2)(0.24%~0.30%)的特征,TFeO/MgO比值介于4.98~8.80,分异指数(DI)介于81.98~86.64均较高,经历了高度的结晶分异,属高分异的I型花岗岩。花岗岩的稀土元素总量较低(ΣREE=94.63×10~(-6)~124.94×10~(-6)),轻重稀土分异程度极高[(La/Yb)N=19.88~26.01],并具有中等—弱的负铕异常(δEu=0.69~0.87);具有大离子亲石元素(K,Ba,Rb)富集和高场强元素(Nb,Ta,Ti)亏损的特征,表明赋矿花岗岩具有岛弧花岗岩的特征。成矿与成岩在时间、空间及成分上的一致性,指示成岩与成矿产生于同一地质事件,即形成于中生代蒙古-鄂霍次克洋向东北板块俯冲的构造环境。  相似文献   

4.
本文通过对撒岱沟门钼矿床的赋矿岩石(二长花岗岩)的主量元素地球化学的研究,揭示了该区花岗岩为准铝质高钾钙碱性I型花岗岩。该区赋矿岩石(二长花岗岩)的稀土元素地球化学特征为轻稀土富集,重稀土亏损,轻重稀土分馏明显,Eu负异常较弱(δEu=0.78)。La/Sm-La图解表明二长花岗岩由岩浆分离结晶作用形成;微量元素Nb、Ta、P、Zr、Ti具有明显的负异常,富集大离子亲石元素Rb、Th、K、Ba,黑云母全铝压力计所计算的岩体结晶压力平均为1.83kbar,平均侵位深度为6.78km,综合地球化学各方面的特征,探讨了该区斑岩型Mo矿床形成的制约因素,以及为什么该区形成斑岩型钼矿床而非斑岩型铜矿床的原因,最后认为该矿床为深源中成斑岩型钼矿床。  相似文献   

5.
<正>新疆苏云河钼矿位于新疆西准噶尔地区的巴尔鲁克山西段,矿石平均品位为0.053%~0.094%,截止2014年底,新疆地质矿产勘查开发局第一区域地质调查大队已探明储量56万吨。苏云河钼矿出露地层是中泥盆统巴尔鲁克组,由凝灰岩、安山质凝灰岩以及安山质含角砾凝灰岩等组成。在时间与空间上,苏云河钼矿主要与早二叠世二长花岗岩和二长花岗斑岩侵入体有关。根据矿物组合、热液蚀变以及脉体穿插关系,我们将苏云河钼矿成矿过程划分为三个阶段:(1)早阶段,热液蚀变主要是钾长石化,发育的脉体包括石英-  相似文献   

6.
乌和尔楚鲁图钼矿床位于国内重要的二连东乌旗钼矿成矿带中,为近几年新发现的斑岩型钼矿床.本次就该矿床成矿岩体的地球化学及其U-Pb年代学开展相关研究.结果表明: 矿区中的成矿岩体属过铝质、高钾钙碱性系列;富集大离子亲石元素(LILE)、亏损高场强元素(HFSE),具有与南岭型花岗岩相似的地球化学特征.锆石LA-ICP-MS U-Pb定年显示,与乌和尔楚鲁图钼矿床成矿有关的花岗斑岩形成于中侏罗世((160 ± 1)Ma).因此,可推测乌和尔楚鲁图钼矿床斑岩型钼矿的成矿时代为燕山早期.综合研究认为乌和尔楚鲁图斑岩型钼矿床形成于后碰撞的构造环境.  相似文献   

7.
陈伟  毛景文  徐兆文  曲晓明  于旸 《地球科学》2018,43(12):4638-4650
系统总结西大别白垩纪赋钼花岗岩的岩石成因,并结合这些岩体的岩石地球化学特征对西大别钼矿床形成条件进行探讨,对认识西大别钼成矿带的地球化学动力学背景具有重要意义.在白垩纪时期,西大别含钼花岗岩成岩作用与东大别地区相似,可分为早、晚两个阶段.早阶段岩体(早于132 Ma)形成于加厚地壳环境,晚阶段岩体(晚于130 Ma)形成于非加厚地壳环境.这种岩石成因上的差别是导致该地区钼矿成矿条件差异的根本原因.结合钼元素的地球化学属性和中央造山带的演化特征,认为晚古生代时期位于造山带南侧的古秦岭洋可能为地壳中Mo元素在表生风化过程中提供有利的沉积环境,并且在三叠纪时期伴随扬子板块一起俯冲到华北板块之下,富钼沉积物与扬子地壳一起部分熔融形成富钼的岩浆,最终形成西大别白垩纪时期大规模的含钼成岩作用.   相似文献   

8.
新疆东戈壁斑岩型钼矿床之斑岩体特征   总被引:1,自引:0,他引:1  
新疆东戈壁斑岩型钼矿床位于哈密市南110 km,为荒漠戈壁区,隶属于东天山觉罗塔格多金属成矿带。钼矿体赋存于斑状花岗岩体的外接触带浅变质碎屑岩中;侵入岩主要有浅肉红色斑状花岗岩(隐伏岩体)、花岗斑岩脉、细粒花岗岩脉三种,控矿岩体为隐伏斑状花岗岩,属华力西晚期第二次侵入。本文对东戈壁矿区岩体的岩石学、岩石化学、岩石地球化...  相似文献   

9.
内蒙古马鞍山沟钼矿区位于大兴安岭成矿带北段,是一个与晚侏罗-早白垩世中酸性侵入岩有关的斑岩型钼矿床。矿体产出于花岗杂岩体中,杂岩体由中细粒二长花岗岩、黑云母花岗岩、花岗闪长岩、钾长花岗岩组成,地球化学特征反映出成矿元素与岩体关系密切,成矿元素的地球化学分带性明显,具有良好的钼多金属找矿前景。通过对马鞍山沟钼矿化探异常特征分析研究,探讨地球化学异常与矿体的关系,认为近似呈环状分布的Mo元素地球化学异常,是矿区最直接的找矿标志。  相似文献   

10.
宝音图钼矿床是近几年在内蒙古西部地区发现的大型斑岩型钼矿床。重点研究该钼矿床成矿花岗岩稀土元素地球化学特征,探讨花岗岩成因。通过对稀土元素配分模式和特征值(∑REE-LREE/HREE、δEu-LREE/HREE相关性)的分析,对比幔源岩浆及南岭花岗岩稀土元素组成特点,结合岩石化学组成,推断宝音图成矿花岗岩属于陆壳熔融成因花岗岩。由斜长花岗岩→二长花岗岩→钾长花岗岩→细晶花岗岩,岩体成分逐渐变化。岩浆演化中有成分分异,有利于成矿,特别是晚期钾长花岗岩富集成矿元素和矿化剂元素。  相似文献   

11.
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.  相似文献   

12.
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.  相似文献   

13.
本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。  相似文献   

14.
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提  相似文献   

15.
本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。  相似文献   

16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.  相似文献   

17.
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.  相似文献   

18.
岩石密度和超高压岩石折返速率   总被引:1,自引:3,他引:1  
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。  相似文献   

19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号