首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 234 毫秒
1.
Topaz granite is alkali-feldspar granite that contains essential albite, quartz, K-feldspar, lithium-mica, and topaz. As a group topaz granites are characterized by their extreme enrichment in F (up to 3 wt%) and a wide variety of lithophile elements. They can be subdivided into a 'low-P2O5 subtype' (P2O5 < 0.1 wt%, Al2O3 < 14.5 wt%, SiO2 > 73 wt%) and a 'high-P2O5 subtype' (P2O5 > 0.4 wt%, Al2O3 > 14.5 wt%, SiO2 < 73 wt%), the δ18O values of which indicate a dichotomy of source rock: the low-P2O5 subtype (δ18O < 10‰) having a meta-igneous protolith and the high-P2O5 subtype (δ18O > 10 ‰) a source with a significant component of pelitic material. The unusually high F contents enhance the efficacy of melt segregation and crystal-melt fractionation and so facilitate extreme differentiation in topaz granite magmas. Very low melt volumes restrict the bulk composition of the partial melts regardless of the nature of the source; and extreme fractionation forces them along a path of magmatic convergence, to produce a group of granitic rocks with near-minimum compositions so enriched in a variety of lithophile elements (Li, Nb, Ta, Sn) that economic mineralization often results.  相似文献   

2.
Experimental results for most rare-earth elements, yttrium and thorium in several international geological reference samples are presented and compared with other published values, where available. The analytical method used to obtain these results involved a preliminary concentration of the rare-earths On milligram quantities of iron as carrier for atomic-absorption, flame-emission and spectrophotometric determinations, or on milligram quantities of Fe2O3, Al2O3 and SiO2 as carriers for optical-emission spectrometric determination.  相似文献   

3.
Abstract. In order to know the behaviors of radioactive elements such as cesium and strontium during a hydrothermal alteration of borosilicate glass of radioactive waste, some alumino-borosilicate glasses belonging to the systems Na2O-Al2O3-B2O3-SiO2-SrO, Na2O-Al2O3-B2O3-SiO2-Cs2O and Na2O-Al2-O3-B2O3-SiO2-SrO-Cs2O have been treated hydrothermally at 200C under a vapor pressure of 1.54 MPa. The result shows that all glasses are changed into crystalline phases with running time up to 60 days, and that analcime-type zeolite is formed as a major product. The formed zeolite is shown to contain cesium and/or strontium. Considering the fact that natural zeolite occurs in wide physicochemical conditions including hydrothermal one, the analcime-type zeolite is expected to fix stably the radioactive elements in the disposal site. Since aluminum is necessary for the formation of the analcime-type zeolite, the waste glass should have aluminum as one of major components.  相似文献   

4.
The results are given for all the determinations made by the co-operating laboratories of major elements in the six NIMROC rock samples (granite, syenite, lujavrite, norite, pyroxenite and dunite) prepared by the National Institute for Metallurgy in 1966. Relevant statistical data are given for the sets of results for each major constituent, and recommended values for all constituents except Al203, Na20, K20and CO2 in dunite, Fe2O3, MgO and CO2 in the granite, Fe23 and CO2 in the norite and CO2 in the pyroxenite.
This report and that on the trace and minor elements issued in 1978 complete the revision of the recommended values. It is suggested that analysts should concentrate rather on those constituents for which the results have shown such a wide scatter that they can be of no usc for reference purposes, than on those for which the ualues are fairly well established.  相似文献   

5.
This paper discusses the mineralogy, whole-rock geochemistry and elemental mass balance of the hydrothermal alteration zones within the Batu Hijau porphyry copper-gold deposit, Sumbawa Island, Indonesia. The hydrothermal alteration and mineralisation developed in four stages, namely (i) the early stage consisting of a central copper-gold-bearing biotite (potassic), proximal actinolite (inner propylitic) and the distal chlorite-epidote (outer propylitic) zones; (ii) the transitional stage represented by the chlorite-sericite (intermediate argillic) zone; (iii) the late stages distinguished into the sericite-paragonite (argillic) and pyrophyllite-andalusite (advanced argillic) zones; and (iv) the very late stage typified by the illite-sericite zone. In general, major elements (particularly Ca, Mg, Na and K) and some minor and rare earth elements decrease from the least altered rocks towards the late alteration zones as a consequence of the breakdown of Ca-bearing hornblende, biotite and plagioclase. Chemical discrimination by means of millicationic R1-R2 diagram indicates that R1 [4Si − 11(Na + K) − 2(Fe + Ti)] increases while R2[6Ca + 2Mg + Al] decreases with increasing alteration intensity, from least-altered, through early, transitional, to late alteration zones. Rare earth elements-chondrite (C1) normalised patterns also exhibit the depletion of the elements through the subsequent alteration zones. These results are consistent with the elemental mass balance calculation using the isocon method which shows that the degree of mass and volume depletion systematically increases during alteration. A decrease of the elements as well as mass and volume from early, through transitional to late alteration stages may imply a general decrease of the element activities in hydrothermal fluids during the formation of the alteration zones.  相似文献   

6.
Six low abundance rock reference materials (basalt BIR-1, dunite DTS-1, dolerite DNC-1, peridotite PCC-1, serpentine UB-N and basalt TAFAHI) have been analysed for high field strength elements (Zr, Nb, Hf, Ta, Th and U), Rb, Sr, Mo, Sb, Cs, Tl and Bi at ng g−1 levels (in rock) by magnetic sector inductively coupled plasma-mass spectrometry after HF/HClO4 high pressure decomposition. The adopted method uses only indium as an internal standard. Detection limits were found to be in the range of 0.08 to 16.2 pg ml−1 in solution (equivalent to 0.08 to 16.2 ng g−1 in rock). Our data for high field strength elements, Rb, Sr, Mo, Sb, Cs, Tl and Bi for the six selected low abundance geological reference materials show general agreement with previously published data. Our Ta values in DTS-1 and PCC-1 (1.3 and 0.5 ng g−1) are lower than in previously published studies, providing smooth primitive mantle distribution patterns. Lower values were also found for Tl in BIR-1, DTS-1 and PCC-1 (2, 0.4 and 0.8 ng g−1). Compared with quadrupole ICP-MS studies, the proposed magnetic sector ICP-MS method can generally provide better detection limits, so that the measurement of high field strength elements, Rb, Sr, Mo, Sb, Cs, Tl and Bi at ng g−1 levels can be achieved without pre-concentration, ion exchange separation or other specialised techniques.  相似文献   

7.
Abstract. Carboniferous-Permian limestones of the Akiyoshi Plateau, in the Inner Zone of southwestern Japan, are composed of essentially pure calcium carbonate containing only small amounts of other elements, and they are accompanied by marble and copper skarn deposits near the contact with late Cretaceous granitoids. The δ18O values of the Akiyoshi limestones range widely from 7.6 to 28.3% and are mostly lower than those of other areas of the same age (23–29%), whereas the differences among the δ13C values are small. The δ18O values are negatively correlated with Mn and Fe contents. Samples with high δ18O (>25%) and δ13C (>2%) values do not contain Fe, Zn, or Pb, but those with low δ18O values tend to be rich in these elements, indicating that these elements were introduced by interaction with H2O dominant fluids, possibly of magmatic origin. Potential scores for evaluating the degree of interaction with hydro thermal fluids were calculated for δ18O, δ13C, Fe, Mn, Zn, Pb, and Sr. Higher scores implying much hydrothermal interaction were evident in the Mt. Hananoyama area, where there are many skarn deposits, and along faults oriented mainly NNW-SSE. Therefore, these are promising areas for exploring for blind deposits. It is likely that the hydrothermal fluid traveled through the limestones along fractures at the time of the granitic intrusions. However, the potential scores here are much smaller than those in the Pb-Zn mineralized area of the Kamioka mine, so more detailed petrological and mineralogical investigations are necessary.  相似文献   

8.
We present a revised method for the determination of concentrations of rare earth (REE) and other trace elements (Y, Sc, Zr, Ba, Hf, Th) in geological samples. Our analytical procedure involves sample digestion using alkaline fusion (NaOH-Na2O2) after addition of a Tm spike, co-precipitation on iron hydroxides, and measurement by sector field-inductively coupled plasma-mass spectrometry (SF-ICP-MS). The procedure was tested successfully for various rock types (i.e., basalt, ultramafic rock, sediment, soil, granite), including rocks with low trace element abundances (sub ng g−1). Results obtained for a series of nine geological reference materials (BIR-1, BCR-2, UB-N, JP-1, AC-E, MA-N, MAG-1, GSMS-2, GSS-4) are in reasonable agreement with published working values.  相似文献   

9.
Data are reported for rare earth elements (REE), Y, Th, Zr, Hf, Nb and Ta in four geological reference materials using sodium peroxide (Na2O2) sintering and inductively coupled plasma-mass spectrometry. The described procedure was used by students during their thesis work. A compilation of their reference material data acquired over one year of laboratory work demonstrates the ease and reliability of the method and the high reproducibility of the analytical results. Relative standard deviations of up to thirty six measurements of one reference material were lower than 5% for Y and the REE. Reproduciblities of Zr, Hf, Nb, Ta and Th were higher at between 5% and 10%, and can be attributed to the inhomogeneous distribution of zircon and other trace mineral phases and uncorrected drift effects. The concentration data are compared to reference and literature values and demonstrate that the procedure is also accurate. New data on G-3 show some systematic deviations from G-2, which are statistically significant.  相似文献   

10.
Abstract: Transportation of various kinds of elements occurred in wall rocks (Quaternary andesites) during the hydrothermal alteration accompanied by the Hishikari epithermal gold mineralization. For example, K2O and MgO contents of wall rocks decrease away from the gold-quartz veins, while (CaO+Na2O) content increases, and SiO2 content is variable near the veins. Hydrothermal alteration zoning and bulk compositional variations in wall rocks suggest that the mixing of hydrothermal solution and acidic groundwater took place an important role as the cause for the hydrothermal alteration and bulk compositional variations. The relationship between dissolved silica concentration and temperature of hydrothermal solution mixed with groundwater is obtained based on precipitation kinetics-fluid flow–mixing model, and the computed results are compared with the distribution of SiO2 minerals (quartz and cristobalite) in the hydrothermal alteration zones. This comparison suggests that the most reasonable flow rate of fluids migrating through hydrothermal alteration zones, and A/M (A: surface area of rocks interacting with fluid, M: mass of fluid) are estimated to be ca. 10-4.2 m/sec, and ca. 0.10 m2/kg, respectively. The mixing of two fluids (hydrothermal solution and acidic groundwater) can also explain δ18O zoning in the altered country rocks, hydrothermal alteration zoning from K-feldspar through K-mica to kaolinite from the center (veins) to margin, and deposition of gold.  相似文献   

11.
Two new geochemical reference materials, copper ore JCu-1 and zinc ore JZn-1 have been prepared by the Geological Survey of Japan (GSJ) for the determination of major and minor elements and isotopic compositions. JCu-1 is a sample of Cu-bearing sulfide ore typical of the Kamaishi mine in Iwate Prefecture, Japan, and is composed mainly of hedenbergite, chalcopyrite, quartz and calcite. Pyrrhotite, magnetite and actinolitic amphibole were also commonly found. The Zn-rich ore, JZn-1 is a crude ore from the Kamioka Pb-Zn mine in Gifu Prefecture, Japan. The sample consists of hedenbergite, quartz, calcite, sphalerite and epidote as main crystalline phase. Homogeneity test results showed that all studied constituents including ore elements such as Cu, Pb and Zn can be considered to be homogeneously distributed. Provisional collaborative analyses were carried out in ten laboratories, and the data were evaluated using a robust statistical method using z-scores. Recommended values for a number of major elements including TiO2, Al2O3, MnO, MgO, CaO, Na2O, K2O, Fe (total), Zn, Cu and Pb were established. In addition, information values for eighteen major, minor and trace elements are presented to support future collaborative analyses.  相似文献   

12.
Trace elements in the Geological Survey of Japan carbonate reference materials Coral JCp-1 and Giant Clam JCt-1 were determined by inductively coupled plasma-mass spectrometry after digestion with 2% v/v HNO3. A standard addition method was adopted in this determination in order to neutralise the Ca matrix effect. In addition, Sc, Y, In and Bi were used as internal standards to control the matrix effect and correct instrumental drift. Of the eighteen elements measured in JCp-1, precisions for fourteen elements, including Cu, Cd and Ba, were better than 10% RSD and concentrations ranged from 0.002 μg g-1 (Cs) to 8.02 μg g-1 (Ba). The concentrations of measured trace elements in JCt-1, except for Cu, were lower than those in JCp-1. Precisions for all elements with concentrations higher than 0.04 μg g-1 in JCt-1 were also better than 10% RSD and concentrations were found to be between 0.001 μg g-1 (Cs) and 4.84 μg g-1 (Ba). The concentrations of more than fifteen trace elements in the aragonite reference materials are reported here for the first time. Both reference materials are suitable for use in geochemical studies of environmental reconstruction based upon biogenic carbonate materials.  相似文献   

13.
The contents of total carbon, hydrogen, nitrogen and sulfur in twenty-seven geological reference materials, issued by five producer organisations (USGS, CCRMP, ANRT, NIST and GSJ) were determined using an automated simultaneous elemental analyser following combustion. In order to complete gasification of C and N in some geological materials, the combustion temperature needed to be greater than 1150 °C. The calibrator prepared from known amounts of reagent material was not adopted for more than 1.2% m/m of H. Unrealistically high values in certain materials supposed to contain less than 1000 μg g−1 S may be due mainly to memory effects. The limit of detection was 50 μg g−1 for C and N, 500 μg g−1 for H and 1000 μg g−1 for S. Although the blank value of C and N was always stable and less than one third of the detection limit, it had a slightly higher value for N and S. By repeating long-term analysis, high reproducibility for each of the four elements was verified. The method has been applied satisfactorily to a variety of geological reference materials, and recommended values for C, H and N for most of the reference materials studied have been tabulated.  相似文献   

14.
Some recent experiments on the determination of Au and the platinum-group elements (PGE) in geochemical samples are reviewed. Emphasis is given to the determination of ultra-low levels of PGE concentrations in resistant matrices, including chromites, molybdenites and ultrabasic ores. The problems and features of PGE determination in samples of various chemical composition are considered. For each sample type studied, a series of sample preparation techniques are proposed. These techniques included acid digestion, fusion with sodium peroxide, cold sintering with an oxidizing mixture of Na2O2+ Na2CO3 and also oxidizing fluorination with bromine trifluoride. A new approach for preparing geochemical material prior to digestion, based on mechano-chemical activation with simultaneous hyperfine grinding, is proposed and studied. The instrumental determination of PGE contents was carried out directly by AAS from extracted organic phases. It was found that a combination of digestion processes was required to achieve geochemical background levels of Au and PGE concentrations with the following detection limits: Pd, Rh - 1 ng g−1, Pt, Ru - 10 ng g−1, Au - 0.2 ng g−1, Ag - 0.1 ng g−1. The uncertainty in PGE and Au determination in geochemical samples is dependent on metal concentration, and also on their distribution in samples. The total analytical uncertainty of the proposed method is between 15-30%.  相似文献   

15.
Diffusion modelling is applied to layered garnet–pyroxene–quartz coronas, formed by a pressure-induced reaction between plagioclase and primary pyroxene in a metabasic granulite. The reconstructed reaction involves some change in composition of reactant minerals. The distribution of minerals between layers is satisfactorily explained by diffusion-controlled reaction with local equilibrium, in which the diffusion coefficient for Al was smaller than those for Fe, Mg and Ca by a factor of approximately four. Diffusion of Mg towards plagioclase implies a chemical-potential gradient for MgO component in a direction opposite to the changing Mg content of garnet; this is explained by the influence of Al2O3 on the chemical potential of the pyrope end-member. Grain-boundary diffusion is suggested to have operated, possibly with composition gradients different from those in the bulk minerals. Chemical-potential differences across the corona are estimated from the variation in garnet composition, enabling affinity (the free energy change driving the reaction) to be estimated as 6.9±1.8  kJ per 24-oxygen mole of garnet produced. This implies that the pressure for equilibrium among the minerals was overstepped by 1.4±0.4  kbar. The probable P–T conditions of reaction were in the range 650–790  °C, 8–10  kbar. Assuming a timescale of reaction between 106 and 108 years, estimated diffusion coefficients for Fe, Mg and Ca are in the range 9×10−23 to 5×10−20 m2 s−1. These are consistent with experimental values in the literature for solid-state diffusion, including grain-boundary diffusion.  相似文献   

16.
In north-central Wopmay Orogen, syntectonic low-P(Buchan-type) suites of mineral isograds outline regional metamorphic temperature culminations that are associated, at the higher structural levels, with emplacement of early Proterozoic plutons in the west part of a deformed and eastward transported continental margin prism. The mapped isograds mark the first occurrence of biotite, staurolite, andalusite, sillimanite, sillimanite-K feldspar and K feldspar-plagioclase-quartz ± muscovite (granitic) pods in metapelites, with increasing proximity to the plutons.
Microprobe analyses and field observations have resulted in the formulation of reactions for the 'ideal'pelitic system K2O-Na2O-FeO-MgO-Al2O3-SiO2-H2O-Al2O3-SiO2-H2O, to account for the various mineral assemblages of each metamorphic zone. A P-T petrogenetic grid showing erosion surface P-T curves for the northern Wopmay Orogen pelites, compiled on the basis of the mapped isograds and the inferred reaction(s) for each metamorphic zone, documents a variation in exposed metamorphic pressure ranging between 2 and 4 kbar.
The configuration of a new bathograd, based on the invariant model reaction sillimanite + K feldspar + plagioclase + biotite + quartz + vapor ± muscovite + liquid and interpolated across three metamorphic suites, is consistent with a major regional structure culmination and with independently determined pressures obtained from anorthite-grossular-quartz-Al2SiO5 geobarometry. The positive correlation between the configuration of the bathograd and the structural and pressure culmination points to the pressure-dependence of anatectic-granitic-pod mineral associations.  相似文献   

17.
Abstract: A strange, unidentified, Cu-Fe bearing zinc sulfide occurs in the Laloki massive sulfide deposit, Papua New Guinea. The mineral is optically uniform in texture but is chemically variable and zoned even within a single grain. Copper contents vary from 0.1 up to 8.85 wt%. Iron reaches 18.31 wt% at maximum and decreases as Cu increases. It is remarkable, however, that the total Fe+Cu remains essentially unchanged between roughly 18 and 20 wt%. Zn and S are least variable, giving 45.85–47.84 wt% and 33.48–34.58 wt%, respectively. Other trace elements such as Cd and Mn are in general less than 0.2 wt%. It is strongly suggested that the mineral in question constitutes a unique Fe-Cu substitutional solid solution series belonging essentially to the Zn–Fe–Cu–S system.
The ideal chemical formula of the solid solution series can well be presented as Zn10(Fe, Cu)5S15 or Zn2(Fe, Cu)S3, where Fe is always greater than Cu. It is intriguing that chalcopyrite blebs are recognizable restrictively only in nearby portions of the Cu-rich end member with the ideal composition close to Zn10Fe3Cu2S15. It has been confirmed by vacuum-sealed heating experiments that this mineral is decomposed to produce chalcopyrite and Fe-bearing normal sphalerite at temperatures below 200C. This would provide another evidence for the existence of such distinct phase as suggested here.  相似文献   

18.
Data are reported for rare earth elements (REE) in three geological glass reference materials (BIR-1G, BHVO-2G and BCR-2G) using a UV (266 nm) laser ablation ICP-MS system and the classical (HF-HClO4) acid decomposition method, followed by conventional nebulisation ICP-MS. External calibration of laser ablation analyses was performed using NIST SRM reference materials with internal standardisation using 29Si and 44Ca. Replicate analyses of reference basaltic glasses yielded an analytical precision of 1-5% (RSD) for all the elements by solution ICP-MS and 1-8% (RSD) by laser ablation ICP-MS. The relative differences between the REE concentrations measured by solution and laser ablation ICP-MS compared with the reference values were generally less than 11 % for most elements. The largest deviations occurred for La determined by solution ICP-MS in BIR-1G. The results of both solution and laser ablation ICP-MS agreed well, generally better than 7%, with the exception of La, Pr and Sm in BIR-1G. The measured REE laser ablation data for BIR-1G, BHVO-2G and BCR-2G agreed with the previously published data on these basaltic reference glasses, within a range of 0-10% for most elements. No significant influences were observed for the predicted spectral interferences on some REE isotopes in the analysis of basaltic glasses.  相似文献   

19.
Abstract In granulite facies metapelitic rocks in the Musgrave Complex, central Australia, reaction between S1 garnet and sillimanite involves the development in S2 of both garnet + cordierite + hercynitic spinel + biotite and hercynitic spinel + cordierite + sillimanite + biotite. The S2 assemblages occur either in coronas and symplectites, mainly around garnet, or, in rocks in which S2 is more strongly developed, as recrystallized assemblages. Ignoring the presence of biotite and ilmenite, the mineral textures can be accounted for qualitatively by a consideration of the model system FeO-MgO-Al2O3-SiO2 (FMAS); the textural relationships accord with decompression accompanying the change from S1 to S2. However, since biotite and ilmenite are involved in the assemblages, the parageneses are better accounted for in terms of equilibria in the expanded model system K2O-FeO-MgO-Al2O3-SiO2-H2-TiO2-Fe2O3 (KFMASHTO), i.e. AFM + TiO2+ Fe2O3. The coronas reflect the tectonic unroofing of at least part of the Musgrave Complex from peak S1 conditions of about 8 kbar to S2 conditions of about 4 kbar.  相似文献   

20.
We have measured 87Sr/86Sr and 143 Nd/144 Nd isotope ratios in different batches and aliquots of the new US Geological Survey (USGS) reference materials (RMs) BCR-2, BHVO-2, AGV-2 and GSP-2 and the original USGS RMs BCR-1, BHVO-1, AGV-1 and GSP-1 by thermal ionisation mass spectrometry. In addition, we also analysed the eight Max-Planck-Institut-Dingwell (MPI-DING) reference glasses. Nearly all isotope ratios obtained in the different aliquots and batches agree within uncertainty limits indicating excellent homogeneity of the USGS powders and the MPI-DING glasses. With the exception of GSP-2, the new USGS RMs are also indistinguishable from the ratios found in the original USGS RMs (87Sr/86Sr: 0.704960, 0.704958 (BCR-1, -2), 0.703436, 0.703435 (BHVO-1, -2), 0.703931, 0.703931 (AGV-1, -2); 143 Nd/144 Nd: 0.512629, 0.512633 (BCR-1, -2), 0.512957, 0.512957 (BHVO-1, -2); 0.512758, 0.512755 (AGV-1, -2)). This means that for normalisation purposes in Sr and Nd isotope geochemistry BCR-2, BHVO-2 and AGV-2 can well replace BCR-1, BHVO-1 and AGV-1 respectively.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号