共查询到20条相似文献，搜索用时 187 毫秒
1.
延边地区天宝山多金属矿田的流体特征与成矿模式 总被引：4，自引：0，他引：4
天宝山铅锌铜钼多金属矿田由新兴铅-锌矿床、东风铅-锌-铜-钼矿床和立山铜-铅-锌矿床组成,它们分别产在侏罗纪黑云母花岗闪长岩、闪长岩与古生代海相火山-沉积岩的接触带和岩体内部。矿床地质特征研究表明:新兴铅-锌矿床以石英硫化物充填胶结角砾岩筒矿体为特征,具有与中温岩浆热液矿床类似的蚀变特征;东风铅-锌-铜-钼矿床以发育浸染状硫化物、石英硫化物脉和辉钼矿石英脉为特征,具有接触交代热液矿床特征;立山铜-铅-锌矿床则以磁铁矿、方铅矿和闪锌矿等多金属硫化物矿化发育为特征,具有典型的接触交代矽卡岩型矿床特征。对主成矿阶段以及成矿晚阶段的脉石矿物石英流体包裹体研究揭示:新兴铅-锌矿床的石英-黄铁矿阶段、石英-闪锌矿-方铅矿-黄铜矿多金属硫化物阶段和石英-碳酸盐阶段对应的温度分别为270～340℃、190～260℃、130～160℃;盐度(w(NaCl))和密度分别为0.62%～9.86%和0.37～1.00g/cm3;压力为37.31～87.69MPa;激光拉曼光谱分析获得流体包裹体的成分主要为CO2、H2O,含有少量的CH4和N2。东风铅-锌-铜-钼矿床的石英-辉钼矿阶段、石英-闪锌矿-方铅矿-黄铜矿多金属硫化物阶段和石英-碳酸盐阶段对应的温度分别为280～337℃、200～260℃、101～190℃;盐度和密度分别为7.16%～23.95%和0.96～1.12g/cm3;压力为28.23～56.64MPa;激光拉曼光谱分析获得流体包裹体成分为H2O。立山铜-铅-锌矿床的磁铁矿-石英脉阶段、石英-方铅矿-闪锌矿-黄铜矿等多金属硫化物和石英-碳酸盐阶段对应的温度分别为210～240℃、170～200℃、126～160℃,盐度和密度分别为2.07%～9.47%和0.89～0.92g/cm3;压力为33.88～59.72 MPa;激光拉曼光谱分析获得流体包裹体成分为CO2和CH4。基于矿床地质特征、成矿流体性质和来源等方面的讨论,建立了天宝山多金属矿田的成矿模式。 相似文献
2.
湖南宝山铜铅锌多金属矿床矿物学特征及其地质意义 总被引：1，自引：0，他引：1
宝山铜铅锌多金属矿床位于我国南岭成矿带中段北缘,是南岭成矿带中的重要类型之一。宝山矿床具有明显的水平分带性,即以花岗闪长斑岩为中心的铜钼矿化,周边是铅锌银矿化。本文通过对宝山铜铅锌多金属矿床中的石榴子石、透辉石、黄铁矿、闪锌矿等矿物进行矿物学研究及电子探针测试分析,归纳总结出：宝山铜铅锌多金属矿床成矿期次为矽卡岩阶段、退变质与氧化物阶段、硫化物阶段;矿床石榴石端员组分总体以钙铁榴石（23.48%~90.39%）为主,其次为钙铝榴石（5.81%~71.27%）;辉石的成分端员以透辉石（Di61-95）为主,石榴子石成分和透辉石组分与世界上典型矽卡岩型铜矿的石榴子石和透辉石组分十分相似,属于典型的矽卡岩型铜矿床。从宝山铜铅锌多金属矿床硫化物中黄铁矿、闪锌矿矿物成分组成可以看出,该矿床硫化物为岩浆热液成因,并呈现出北东向比南西向成矿温度高的特征。 相似文献
3.
安徽西湾铅锌矿床位于长江中下游成矿带庐枞矿集区北部,是近年来在该地区发现的首个赋存于三叠系周冲村组碳酸盐地层中的大型隐伏铅锌矿床,目前该矿床的成矿流体演化及矿床成因研究较为薄弱,制约了该地区铅锌矿床成矿理论与地质勘探。文章根据矿床地质特征,结合镜下鉴定,认为矿床中硫化物主要形成于石英碳酸盐硫化物阶段及碳酸盐硫化物阶段。闪锌矿原位微量元素分析和包裹体测温数据显示,石英碳酸盐硫化物阶段闪锌矿Fe、Mn含量相对较高,Ga、Ge、Cd含量相对较低,该阶段闪锌矿的均一温度为207～236℃,流体盐度w(NaCleq)范围为7.45%～11.81%;碳酸盐硫化物阶段的闪锌矿相对贫Fe和Mn,Cd、Ga和Ge含量相对较高,其闪锌矿均一温度为164～189℃,流体盐度w(NaCleq)为0.88%～5.56%。此外,西湾矿床西南部的样品以石英碳酸盐硫化物阶段的闪锌矿为主,而东北部的样品以碳酸盐硫化物阶段为主,流体包裹体均一温度结果表明矿床成矿温度从西南(183～240℃)向东北方向呈降低趋势(160～209℃),说明成矿流体由西南向东北方向移动。西湾矿床闪锌... 相似文献
4.
对辽宁青城子铅锌-银-金矿床的主要矿石矿物方铅矿、闪锌矿和黄铁矿进行了显微鉴定、电子探针和ICP-MS分析，获得它们的固结顺序为：黄铁矿早于闪锌矿，二者早于方铅矿（闪锌矿交代黄铁矿，方铅矿交代前两者）。从硫化物成分空间分布可以判断成矿流体以甸南-榛子沟为中心分别向二道-喜鹊沟和大地-白云迁移。根据方铅矿固结温度（327℃）参考石英流体包裹体均一温度（322℃），限定以方铅矿为主的矿床其硫化物形成温度约为322～327℃；利用Cd在方铅矿-闪锌矿分配系数温度计获得铅锌矿成矿温度在344～464℃之间，结合闪锌矿出溶黄铜矿温度（高于350℃），参考石英流体包裹体均一温度（300～360℃），并参考黄铁矿发生脆性变形温度（400℃），获得以闪锌矿为主的矿床硫化物形成温度约为360～400℃，银铅锌矿床的成矿温度被限定在390～400℃；由于自然金主要赋存在黄铁矿微裂隙中，利用黄铁矿发生脆性变形温度并结合石英流体包裹体温度（230～370℃）约束金成矿温度约为370～400℃。成矿温度较高可能归因于样品采集位置较深所致；最后利用矿石矿物、侵入岩、围岩微量元素对比分析判断成矿流体与中生代（特别是印支期）侵入岩具有亲缘性，根据印支期岩浆混合特征认为岩浆混合作用可能对本地区成矿作用具有重要贡献。 相似文献
5.
青海虎头崖铅锌矿床是祁漫塔格成矿带矽卡岩型多金属矿的典型代表之一,该矿区岩浆活动强烈,具有Fe、Cu、Mo、Pb、Zn等多金属成矿元素组合。本文通过电子探针对该矿床中闪锌矿化学成分标型特征进行了详细研究,探讨其中Fe、Cd等元素的分布状态和富集规律。研究表明,矿床中闪锌矿可分为3个世代,从早到晚闪锌矿颜色由黑色逐渐变为浅黄色,矿物组合由闪锌矿-(方铅矿-黄铜矿)-黄铁矿-磁黄铁矿→闪锌矿-方铅矿-黄铜矿-黄铁矿-(磁黄铁矿) →闪锌矿-方铅矿-方解石或石英。早阶段形成的闪锌矿以富Fe贫Zn和Cd为特征,而晚阶段形成的闪锌矿相对贫Fe,富Zn和Cd。通过闪锌矿中的FeS含量估算获得成矿温度范围为148～262℃。随着成矿阶段的演化,3个世代闪锌矿中FeS含量逐渐降低,表明对应成矿温度的不断降低,分别为262～258、260～200、248～148℃。结合Zn/Cd含量比值变化范围,认为虎头崖铅锌矿床应属于中温热液矿床。在空间分布上,沿着热液流动方向,闪锌矿中Zn含量逐渐增加,Fe含量逐渐减少,Zn/Cd变化范围增大,指示矿床中热液流动方向为由北西西到南东东,由深部到浅部,与矿体走向一致。通过与国内其他不同类型铅锌矿床的对比,发现虎头崖铅锌矿床闪锌矿中Zn、Fe、Mn、Cd等化学成分具有典型中温矽卡岩型矿床中闪锌矿化学成分的特征,明显不同于层控型矿床、喷流沉积型矿床等其他类型矿床闪锌矿。结合该矿床地质特征和成矿作用过程,我们认为虎头崖铅锌矿床为矽卡岩型矿床。 相似文献
6.
安徽池州许桥银矿地质特征及矿区深部找矿方向 总被引：2，自引：0，他引：2
许桥银矿床位于长江中下游成矿带安庆-贵池矿集区东南部,矿床银储量达到中型规模,成矿岩体为分水岭石英闪长岩,矿体主要呈似层状赋存于分水岭岩体北东侧奥陶系仑山组、汤山组地层层间裂隙中;矿石矿物主要为黄铁矿、闪锌矿、方铅矿、黝铜矿、黄铜矿、辉银矿、自然银,脉石矿物为石英、碳酸盐矿物;矿石组构以自形-他形晶结构、交代结构、稀疏浸染状构造和网脉状构造为主;围岩蚀变类型主要有硅化、碳酸盐化、矽卡岩化、绿泥石化等;许桥银矿床成矿作用经历了两个成矿期：热液期和表生期,热液期又可分为三个成矿阶段,即为矽卡岩阶段、石英-硫化物阶段及碳酸盐-硫化物阶段;成矿流体早期以岩浆热液为主、晚期混有大气降水的流体演化特征;成矿物质主要来源于岩浆热液,地层贡献了部分矿质;成矿温度为中低温（208～259℃）,矿床类型为中低温热液银多金属矿床,并指明了矿区深部找矿方向。 相似文献
7.
8.
铜山岭“层间矽卡岩型”多金属矿床成因探讨 总被引：4，自引：0，他引：4
铜山岭多金属矿床是一富银的铜铅锌矿床,过去一直将其归为接触交代型(即矽卡岩型)矿床,并按矿体产出形式划分为接触带矽卡岩型、外接触带层间矽卡岩型和石英硫化物脉型矿体。其中以层间矽卡岩型最为重要。本文讨论对象为外接触带层问矽卡岩型(及伴随的石英硫化物脉型)矿体,笔者认为它们不同于接触带矽卡岩型矿体,应属层控-热液再造成因型矿床。为方便起见,本文在叙述中仍沿用层间矽卡岩型之名称,并辅之以引号相区别。 相似文献
9.
帮布勒矿床是近年来在西藏冈底斯—念青唐古拉多金属成矿带西段新发现的大型矽卡岩型Pb-Zn矿床。闪锌矿作为该矿床的主要矿石矿物之一,其矿相学特征及化学组分对于揭示成矿物理化学条件和流体演化过程具有重要意义。本文选取帮布勒矿床近端及远端矽卡岩中不同世代闪锌矿开展详细的显微结构观察和电子探针成分研究。结果表明,帮布勒矿床闪锌矿可划分为2个世代:第Ⅰ世代闪锌矿主要产于近端矽卡岩,呈暗红色-棕红色,常与乳滴状黄铜矿共生,并交代他形磁铁矿、磁黄铁矿,Fe元素含量较高(部分闪锌矿Fe含量>10%),Zn/Fe值<10;第Ⅱ世代闪锌矿可进一步分为两类:第一类(Ⅱa)闪锌矿在近端及远端矽卡岩中均有发育,呈棕黄色,充填于辉石、石榴子石等矽卡岩矿物间及其裂隙中;第二类(Ⅱb)闪锌矿主要产于远端矽卡岩中,呈黄色-浅黄色,与方铅矿和石英共生,第Ⅱ世代闪锌矿相比于第Ⅰ世代闪锌矿Fe、Mn含量明显偏低,Zn含量较高。闪锌矿Fe元素温度计估算结果显示,从第Ⅰ世代至第Ⅱ世代成矿温度逐渐降低,分别为160～314℃、138～157℃,与闪锌矿Zn/Fe比值指示结果一致。综上证据,本文认为帮布勒矿床早期成矿流体... 相似文献
10.
银水寺铅锌矿床位于大别造山带北缘,是该区最大的矽卡岩型矿床。矿体主要发育在中元古界庐镇关岩群仙人冲组大理岩与郑堂子组千枚岩之间的层间破碎带以及正长花岗斑岩与大理岩的接触带中。矿床先后经历了四个成矿阶段,矽卡岩阶段(Ⅰ)、石英.白钨矿阶段(Ⅱ)、石英.硫化物阶段(Ⅲ)、碳酸盐阶段(Ⅳ)。矽卡岩阶段(Ⅰ)主要发育绿帘石、阳起石、石英、绿泥石、磁铁矿及少量金属硫化物等;石英.白钨矿阶段(Ⅱ)主要发育石英、方解石、萤石及少量白钨矿和金属硫化物;石英.硫化物阶段(Ⅲ)广泛发育闪锌矿、方铅矿、黄铜矿等金属硫化物及石英、方解石、萤石、绿泥石等;碳酸盐阶段(Ⅳ)主要发育方解石、石英及少量黄铁矿。矿床中发育三种类型流体包裹体,包括富CO2水溶液包裹体(AC类)、气液两相水溶液包裹体(L类)和含子晶多相包裹体(S型)。根据流体包裹体岩相学、显微测温、激光拉曼研究结果,矽卡岩阶段主要有富CO2包裹体和气液两相水溶液包裹体,均一温度为314~400℃、盐度变化范围较大(1.1%~19.3%NaCleqv);石英.白钨矿阶段发育气液两相水溶液包裹体、含子晶多相包裹体和富CO2包裹体,后两者均一温度相近(263~349℃)、盐度差异较大(32.8%~41%NaCleqv和0.8%~6.1%NaCleqv),表明流体发生了沸腾作用;石英.硫化物阶段主要发育气液两相水溶液包裹体,均一温度为230~332℃,盐度为0.2%~8.9%NaCleqv;碳酸盐阶段只发育气液两相水溶液包裹体,显示低温(162~245℃)、低盐度(0.2%~5.6%NaCleqv)的特征。矿床不同成矿阶段石英、绿帘石中流体包裹体中水H-O同位素研究结果表明,δ18Ofluid值从早到晚逐渐减小,其中矽卡岩阶段为–1.3‰~4.7‰、石英.硫化物阶段为–5.1‰~–3.1‰,表明银水寺矿床早期成矿流体主要为岩浆来源,并在成矿过程中不断有大气降水的加入。石英流体包裹体中CO2的C同位素测试结果表明,矽卡岩阶段δ13CV-PDB值为–9.2‰,石英.硫化物阶段为–25.8‰~–15.4‰,表明早期成矿流体中碳质主要来自岩浆,石英-硫化物阶段有大量有机碳加入,其可能与流体和富含有机质的地层反应有关。矿石中主要金属硫化物的δ34S值(1.7‰~4.4‰)显示了深源硫的特征。Pb同位素变化范围集中(206Pb/204Pb=16.55~16.705,207Pb/204Pb=15.369~15.459,208Pb/204Pb=37.463~37.767),显示壳幔混源的特点。随着成矿作用的进行,岩浆流体与碳酸盐围岩地层发生水岩交代反应形成矽卡岩,该过程造成了成矿矽卡岩阶段磁铁矿和少量闪锌矿的沉淀;断裂活动造成热液体系压力下降,流体发生沸腾,CO2、HF进入气相并逃逸促使矿床中钨的沉淀;同时大气降水沿裂隙灌入,混合作用导致流体的温度、盐度降低,Cl–浓度下降,造成矿床中铅锌的大面积沉淀。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献