共查询到20条相似文献，搜索用时 93 毫秒
1.
伊朗Emarat铅锌矿床成矿特征及矿床成因研究 总被引：1，自引：0，他引：1
Emarat是位于伊朗Sanandaj-Sirjan带内的一个大型密西西比河谷型(MVT)铅锌矿床,其研究程度较低,矿化特征不明,并且,矿床脉石矿物显著富集石英,这一特征在MVT矿床中并不多见,因此,石英富集的原因值得探讨。此外,涉及矿床成因的成矿流体和物质来源有待查明。Emarat矿床铅锌矿体发育于早白垩纪灰岩中,呈多条近平行脉顺层、陡倾产出,矿化分两个阶段,分别为:1成矿前阶段,为细粒石英+黄铁矿强烈交代赋矿灰岩;2成矿阶段,表现为粗粒石英+闪锌矿+方铅矿+方解石呈脉状、斑团状出现在硅化灰岩中。流体包裹体研究表明,成矿阶段粗粒石英中流体包裹体为盐水体系,均一温度介于132.2~225.3℃之间,盐度为18.47%~24.15%NaCl,液相组分以Na+和Cl-为主,含少量Ca2+、Mg2+和K+,Na+/K+比值较高(平均为29),SO2-4含量低,成矿流体具盆地卤水特征,岩浆流体特征不明显。石英的δ18 OV-SMOW介于18.6‰~20.7‰之间,分别用低的和高的均一温度峰值计算得到流体的δ18 OH2O范围为2.84‰~4.94‰(T=201.7℃)与7.02‰~9.12‰(T=147℃),流体δD值介于-76.2‰~-57.5‰之间。流体氧同位素组成与岩浆水氧同位素组成相似,但综合岩相学特征、流体包裹体测温和成分数据发现,这种氧同位素组成特征可能由来自盆地卤水的初始成矿流体在矿化部位与围岩发生强烈水岩作用,从而导致围岩中相对富18 O的氧进入流体所致。结合前人对富石英MVT矿床矿物共生组合的模拟分析,暗示成矿过程中石英的大量出现可能为热的盆地卤水与较冷围岩发生相互作用、温度快速下降所致。闪锌矿δ34S值介于4.6‰~10.3‰,方铅矿δ34S值介于2.6‰~7.9‰,推测硫来自硫酸盐的热化学还原。方铅矿206 Pb/204 Pb比值为18.4112~18.4157,207 Pb/204 Pb比值为15.6472~15.6497,208 Pb/204 Pb比值为38.5642~38.5808,与区域铅锌矿床(点)铅同位素组成基本一致,表明成矿金属为壳源。 相似文献
2.
对新疆霍什布拉克铅锌矿床硫化物硫、铅同位素测定,获得成矿早期黄铁矿的δ34S值为-12.1‰～-8.5‰,闪锌矿的δ34S值为-17.6‰,方铅矿的δ34S值为-18.8‰;晚期黄铁矿的δ34S值为+12.8‰～+22.2‰,闪锌矿的δ34S值为+20.0‰～+24.2‰,方铅矿的δ34S值为+14.4‰+22.2‰.成矿从早到晚,硫同位素由大的负值变化到大的正值,方铅矿的206 Pb/204 Pb比值为17.900-18.086,207Pb/204Pb比值为15.586-15.732,208Pb/204Pb比值为37.997-38.381;黄铁矿的206Pb/204Pb比值为17.950,207 pb/204Pb比值为15.633,208 pb/204 Pb比值为38.144.灰岩的206pb/204 Pb比值为18.156-18.875,207Pb/204Pb比值为15.396-15.855,208Pb/204Pb比值为37.631-38.967.硫同位素指示硫来源于海水硫酸盐还原硫.铅同位素指示至少有两上以上来源. 相似文献
3.
笔者对大宝山多金属矿床矿石和脉石矿物进行铅、硫、氢和氧同位素组成测定,获得硫化物的206Pb/204Pb值为17.930～18.785;207Pb/204Pb值为15.491～15.772;208Pb/204Pb值为37.990～40.990,并组成良好的线性关系。泥盆系地层中黄铁矿的δ34S为-22.5‰～+17.9‰,矿床硫化物的δ34S为-2.4‰～+4.6‰。黄铁矿、闪锌矿和方铅矿共生矿物对,具有δ34Spy>δ34Ssp>δ34Sgn,用磁黄铁矿的硫同位素组成估算出δ34S∑S为2‰±3‰。硫化物包裹体的氢同位素在-101‰～-123‰之间,与硫化物共生石英的氧同位素为+9.3‰～+17.9‰,换算成水的氧同位素为+0.3‰～+3.9‰,表明成矿热液来源较为复杂。 相似文献
4.
豫西银家沟硫铁多金属矿床流体包裹体和同位素特征 总被引：6，自引：0，他引：6
河南省银家沟硫铁多金属矿床位于华北克拉通南缘华熊地块内,是东秦岭地区最大的硫铁多金属矿床,以其硫铁储量大及共、伴生元素复杂区别于东秦岭其他以钼为主的矿床.成矿的全过程可以划分为矽卡岩期、硫化物期和表生期,包括磁铁矿阶段、脉状石英-辉钼矿阶段、石英-黄铁矿-黄铜矿-斑铜矿-闪锌矿阶段、网脉状石英辉钼矿阶段、石英绢云母-黄铁矿阶段、方解石-方铅矿闪锌矿阶段和玉髓褐铁矿阶段.流体包裹体研究表明,银家沟矿床主要发育气液两相水溶液包裹体(W型)、含CO2三相包裹体(C型)和含子矿物多相包裹体(S型).钾长花岗斑岩的石英斑晶中流体包裹体均一温度介于341～＞550℃之间,盐度介于0.4％～44.0％ NaCl eqv之间,属H2O-NaCl-CO2体系;脉状石英-辉钼矿阶段流体包裹体均一温度介于382～416℃之间,盐度介于3.6％～40.8％ NaCl eqv之间,属H2O-NaCl体系;石英-方解石-黄铁矿黄铜矿-斑铜矿-闪锌矿阶段流体包裹体均一温度介于318～436℃之间,盐度介于5.6％～42.4％ NaCl eqv之间,属H2O-NaCl体系;网脉状石英-辉钼矿阶段流体包裹体均一温度介于321～411℃之间,盐度介于6.3％～16.4％ NaCl eqv之间,属H2 O-NaCl体系;石英-绢云母黄铁矿阶段流体包裹体均一温度介于326～419℃之间,盐度介于4.7％～49.4％ NaCl eqv之间,属H2O-NaCl体系.银家沟矿床成矿流体主要为高温、高盐度流体,总体上属于H2O-NaCl±CO2体系.成矿热液的δ18 OH2O值为4.0‰～8.6‰,δ18 Dv-SMOW值为-64‰～-52‰,表明成矿流体来自岩浆水.矿石金属硫化物的δ18 SV-CDT值介于-0.2‰～6.3‰之间,平均为1.6‰,具深源硫特征,硫主要来自分异很差的由火成物质组成的下地壳,官道口群白云岩亦提供了部分重硫.矿床金属硫化物的206 Pb/204 Pb值介于17.331～18.043之间,207 Pb/204 Pb值变化于15.444～15.575之间,208 Pb/204 Pb值变化于37.783～38.236之间,总体上与银家沟岩体的铅同位素范围一致,暗示铅主要来自矿区内的燕山期中酸性岩体,地层在成矿过程中亦提供了少量物质.银家沟矿床属斑岩-矽卡岩型,形成于中生代EW向构造体制向NNE向构造体制转变阶段,成矿流体多期次的沸腾作用是矿质沉淀的主要机制. 相似文献
5.
笔者对湖南香花岭锡多金属矿床成矿期不同的矿物组合进行矿物包裹体温度和硫、铅同位素测定,获得了锡石-硫化物阶段平均-温度为350℃,硫化物阶段平均均-温度为250℃.锡石-硫化物中黄铁矿的δ34为-1.O‰～+5.4‰;闪锌矿的δ34S为+0.8‰-+5.8‰;磁黄铁矿的δ34S为+1.5‰～5.2‰;方铅矿的δ34S为-1.0‰+3.6‰,具有变化范围小,组成稳定的特点.方铅矿的206Pb/204Pb值为17.785～19.341,207Pb/204Pb值为15.416～16.452,208Pb/204Pb值为38.357～42.579.硫同位素指示硫来源于岩浆,铅同位素指示是多来源. 相似文献
6.
水竹岭铜-铁-金-硫矿床发育上部层状矿体和下部脉状矿体。上部层状矿石重晶石δ34S值为+19.9‰。上部层状矿石黄铁矿δ34S值为+0.9～+5.8‰,下部脉状矿石黄铁矿δ34S值为+3.2～+6.4‰。下部脉状矿体中方解石的δ18O值为+13.3‰,δ13C值为1.2‰,上部层状矿石白云石的δ18O值为+14.1‰,δ13C值为2.2‰。下部脉状矿石和矿化岩石中黄铁矿的206Pb/204Pb、207Pb/204Pb、208Pb/204Pb平均值分别为18.2241、15.5245和38.2289;上部层状矿石中黄铁矿的206Pb/204Pb、207Pb/204Pb、208Pb/204Pb平均值分别为18.0692、15.5020和38.1232。从下部脉状矿石到上部层状矿石,黄铁矿的δ34S值、206Pb/204Pb、207Pb/204Pb、208Pb/204Pb平均值逐渐降低,δ18O值和δ13C值等逐渐增高。地质和同位素地球化学特征反映水竹岭铜-铁-金-硫矿床为海底热水喷流沉积成因,揭示了块状硫化物矿床的二元结构性。 相似文献
7.
河南省老里湾银铅锌矿床位于华北克拉通南缘华熊地块崤山断隆区,是近年来在崤山东部浅覆盖区新发现的一处大型矿床。老里湾矿床的矿体受断裂构造控制,主要呈浸染状、细脉浸染状和脉状赋存于早白垩世花岗斑岩体内的NW向和NNW向断裂破碎带中,亦有少量的矿体产于中元古界熊耳群火山岩内的断裂中。根据矿物共生组合、矿石组构及脉体穿插关系,将老里湾银铅锌矿床的成矿过程划分为3个成矿阶段,即:(1)绢云母+闪锌矿+方铅矿+黄铁矿阶段(早阶段);(2)重晶石+闪锌矿+方铅矿+银矿物±碳酸盐±石英阶段(中阶段);(3)闪锌矿+方铅矿+银矿物阶段(晚阶段)。文章对花岗斑岩的石英斑晶和热液阶段重晶石流体包裹体的研究表明,石英斑晶中主要发育含子矿物多相包裹体(S型)、富液两相水溶液包裹体(WL型)及少量的富气两相水溶液包裹体(WG型);重晶石中主要发育WL型包裹体。花岗斑岩的石英斑晶中包裹体完全均一温度介于338~586℃,平均494℃;盐度w(Na Cleq)介于11.0%~70.2%,密度为0.87~1.27 g/cm~3,属于高温、高盐度的H_2O-Na Cl体系。成矿中阶段的重晶石中包裹体均一温度为128~401℃,平均254℃;盐度w(Na Cleq)为1.6%~8.1%,密度0.59~0.95g/cm~3,属于中温、低盐度的H_2O-Na Cl体系。成矿中阶段重晶石中流体的δ~(18)O水值介于5.9‰~8.4‰,δDV-SMOW值介于-89.7‰~-65.5‰,表明成矿流体为岩浆水。重晶石的δ~(13)CPDB变化于-22.9‰~-12.5‰,具有花岗质岩浆演化形成的流体特征。矿石金属硫化物的δ~(34)S值介于1.9‰~5.9‰,平均3.5‰,具有深源硫的特征;成矿阶段重晶石的δ~(34)S值介于9.2‰~11.1‰,平均10.2‰。重晶石的δ34S值大于硫化物的δ~(34)S值,是同位素分馏造成的。矿床金属硫化物的Pb同位素组成较为集中,~(206)Pb/~(204)Pb介于17.262~17.430;~(207)Pb/~(204)Pb介于15.444~15.501;~(208)Pb/~(204)Pb介于37.774~38.050。S-Pb同位素组成表明老里湾矿床的成矿物质主要来自矿区内的早白垩世花岗质岩浆。崤山东部发育斑岩型钼铅锌银成矿系统,老里湾银铅锌矿床属于该成矿系统的浅部脉状矿化端员。初始中低盐度流体的降温是老里湾银铅锌矿床矿质沉淀的主要机制。 相似文献
8.
南秦岭旬阳盆地下古生界铅锌成矿作用 总被引：1，自引：0，他引：1
近年来,南秦岭旬阳盆地志留系铅锌矿集区铅锌矿床勘查取得重大突破,备受关注.旬阳盆地下古生界中的铅锌矿床主要赋存于志留系梅子垭组和双河镇组,受地层控制明显,矿体形态简单,主要为层状和似层状,矿石结构简单,矿物成分单一,围岩蚀变弱且不对称;闪锌矿δ34S组成平均为6.83‰,方铅矿δ34S组成平均为5.95‰,黄铁矿矿石δ34S为1.1‰,志留系泥质岩石中黄铁矿的δ34S平均为15.64‰,硫主要来源于海水硫酸盐;208Pb/204Pb为37.93%～38.95%,207Pb/204Pb为15.55%～15.69%,反映铅的来源为上地壳.成矿温度为135～297 o C,属于中低温,成矿流体成分主要以K+、Na+、Ca2+、Mg2+、F-、Cl-、SO2-4为主,Na+/ K+值小于1,F-/ Cl-值很小,主要来自于海水.因此,热水沉积成矿作用是旬阳盆地下古生界铅锌矿床形成的主要原因. 相似文献
9.
青海沱沱河地区多才玛铅锌矿床成因:原位S和Pb同位素证据 总被引：2，自引：2，他引：0
青海沱沱河地区多才玛铅锌矿床是西南三江特提斯北段新生代铅锌矿集区的典型矿床之一,本文首次应用飞秒激光剥蚀多接受器等离子体质谱法对多才玛铅锌矿床中金属硫化物的原位S和Pb同位素进行了测定。结果显示:黄铁矿、方铅矿和闪锌矿的原位S同位素的δ~(34)S_(V-CDT)值介于-26.34‰～4.24‰之间,均值-12.15‰(n=20),其中闪锌矿的δ~(34)S_(V-CDT)值介于-10.30‰～-3.52‰,均值-7.39‰(n=9);方铅矿的δ~(34)S_(V-CDT)值为-26.34‰～-11.74‰,均值-20.36‰(n=9);黄铁矿的δ~(34)S_(V-CDT)值分别为2.50‰,4.24‰。矿床δ~(34)S数据范围较宽,总体表现为富集负值硫的特征,说明有机质可能参与成矿。岩浆热液期发育的黄铁矿δ~(34)S值具有深源特征,沉积热液期发育的方铅矿和闪锌矿的δ~(34)S值表明成矿过程存在还原作用,指示盆地地层还原流体的混入,综上可认为多才玛铅锌矿床硫具有混合来源的特征。方铅矿原位Pb同位素结果为~(206)Pb/~(204)Pb=18.866～18.929,~(207)Pb/~(204)Pb=15.674～15.689,~(208)Pb/~(204)Pb=39.052～39.174。方铅矿与地层的Pb同位素组成一致,位于上地壳平均Pb演化线之上,具上地壳和地幔混合俯冲带铅的特征,表明其成矿物质的来源多样。结合矿床学、矿物学及同位素数据,本文认为多才玛铅锌矿床S元素主要来源于赋矿围岩,Pb金属元素主要来源于藏北钾质火山岩,侵入地层岩浆与盆地流体的混合是金属硫化物沉淀的重要机制。 相似文献
10.
滇东北茂租大型铅锌矿床成矿物质来源及成矿机制 总被引：4，自引：0，他引：4
茂租铅锌矿床地处扬子地块西缘,是川滇黔铅锌成矿域内赋存于震旦系灯影组白云岩中大型铅锌矿床的典型代表.其工业矿体呈似层状、脉状和不规则状.热液方解石和矿石硫化物(闪锌矿、方铅矿和黄铁矿)是主要矿物,其形成贯穿整个成矿过程.在矿床地质特征解析基础上,获得了热液方解石C-O同位素和矿石硫化物S-Pb同位素数据,结果表明热液方解石δ13CpDB值和δ18OSMOW值变化范围较窄,分别为-3.73‰～-1.95‰和+13.80‰～+14.95‰,在δ13 CPDB与δ18OSMOW图上介于海相碳酸盐岩和原生碳酸岩范围间,呈弱负相关趋势,表明成矿流体中的CO2主要由海相碳酸盐岩溶解作用形成,并存在慢源和有机CO2加入;硫化物δ34 SCDT值介于+13.35‰～+15.37‰,暗示成矿流体中的硫是海相硫酸盐岩热化学还原的产物,而含硫有机质热降解也有贡献;硫化物Pb同位素组成稳定,206 pb/204 Pb,207 pb/204 Pb和208 pb/204 Pb值范围,分别为18.129～18.375,15.644～15.686和38.220～38.577,位于上地壳和造山带Pb演化线之间,落入基底岩石(昆阳群和会理群)Pb同位素组成范围内,表明成矿物质具有壳源特征,主要由基底岩石提供.综合各类地质-地球化学信息,认为茂租铅锌矿床成矿流体中不同组分来源不同,具有“多来源混合”特征,其成矿机制可以用“流体混合”模式来解释. 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献