首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
中国含金矽卡岩矿床的分布和主要地质特征   总被引:14,自引:4,他引:14  
夕卡岩金矿床主要分布于中国东部,特别是在长江中下游地区,并常和夕卡岩铜(铁或多金属)矿床共生。它们产生的有利构造环境为地台边缘的拗陷和褶皱带以及地台内部的深大断裂附近地区,主要控矿地导炭-二叠纪和三叠纪碳酸盐岩,有关侵入岩为钙-碱性闪长岩,石英阀长岩,石英二长闪长岩,花岗闪长岩,二长花岗岩及共浅成相,大多属燕山期,含金夕卡岩以钙夕卡岩为主,镁夕卡岩次之,在夕卡岩及其邻近的围岩中叠加有较强的退化热液  相似文献   

2.
在冈底斯Cu-Au成矿带东南部的山南地区分布有克鲁、劣布、冲木达和陈坝等中到大型Cu-Au±Mo矿床。与含铜夕卡岩有关的侵入岩形成于20~30Ma之间,为高钾钙碱性中酸性浅成岩,形成于印-亚大陆碰撞晚期构造背景。矿化赋存于岩体外接触带下白垩统比马组的碳酸盐岩和其他钙质岩石内。主要矿化类型为夕卡岩型、热液脉型和斑岩型,构成完整的斑岩-夕卡岩、热液脉状铜-金(钼)多金属成矿体系,矿化组合主要为Cu-Mo、Cu-Au和Cu。外接触带的蚀变以夕卡岩化、角岩化为主,而内接触带上主要为岩体的绢云母化、硅化、绿泥石化等,内夕卡岩不发育。夕卡岩化可分为早期夕卡岩和晚期含水硅酸盐阶段。早期夕卡岩主要为钙铁、钙铝石榴石夕卡岩,含少量透辉石、磁铁矿等,晚期的含水硅酸盐阶段主要是绿泥石-绿帘石、方解石、石英交代石榴石夕卡岩,并伴随含铜硫化物的沉淀,为本区夕卡岩型铜矿形成的主要阶段。含铜硫化物以富含斑铜矿为特征,Au、Ag主要赋存于斑铜矿、硫铋铜矿及黄铜矿等矿物中。山南地区的夕卡岩型铜-金矿床均为浅部夕卡岩,在某些夕卡岩型铜金矿床中显示了斑岩型矿化的存在,可能暗示该区的夕卡岩型矿化与北带相似,具有统一的斑岩型-夕卡岩型成矿系统。因此本区具有在深部寻找斑岩型金矿的可能性,而且找矿潜力较大。  相似文献   

3.
黑龙江三矿沟铁铜矿床位于大兴安岭北段多宝山矿集区,矿体产于燕山期侵入岩与奥陶系多宝山组大理岩接触带的夕卡岩内。根据矿物共生组合及交代关系,确定热液成矿过程包括夕卡岩阶段、退夕卡岩阶段和石英硫化物阶段。铁矿化主要发生在退夕卡岩阶段,形成磁铁矿、镜铁矿等铁氧化物,呈浸染状、条带状、块状产于钙铁榴石夕卡岩中。铜矿化主要发生在石英硫化物阶段,形成黄铜矿、斑铜矿等硫化物,交代早期矿物。电子探针分析等研究表明,三矿沟铁铜矿床发育钙质夕卡岩矿物组合,其石榴子石主要为钙铝榴石和钙铁榴石,辉石为透辉石钙铁辉石系列,角闪石属于钙角闪石系列,绿泥石属于I型三八面体富铁绿泥石。石榴子石有3种类型:早期自形粗粒的钙铝榴石(Grt-Ia)和钙铁榴石(Grt-Ib),以及晚期呈脉状产出的钙铁榴石(Grt-Ⅱ)。夕卡岩阶段成矿流体具有高温、弱酸性、高氧逸度的特征;退夕卡岩阶段流体温度降低,pH升高,形成大量铁氧化物;石英硫化物阶段流体温度和氧逸度降低,金属硫化物沉淀。  相似文献   

4.
湖北铜绿山铜铁矿床成矿机制探讨   总被引:1,自引:0,他引:1  
张宗保 《地学前缘》2010,17(5):296-305
以铜绿山铜铁矿为例,探讨了浅成岩体冷却过程中夕卡岩及夕卡岩矿床在接触带上的形成过程及其耦合条件。在铜绿山矿区,矿体主要产出于石英二长闪长玢岩与下三叠统大冶群碳酸盐岩的半岛状 岛链状残留、捕虏体接触带中,矿体与夕卡岩密切共生。此次工作根据大量野外观察,结合对已有资料综合研究,提出成矿空间为冷缩低压区的概念,即夕卡岩及夕卡岩矿床形成的起因是在岩浆固结后的岩石冷凝收缩过程中,在接触带上形成了一个能使流体持续汇聚和长期驻留的低压区--冷缩低压区系统。这个系统与岩浆期后热液的耦合,在超临界流体、CO2气体和临界转换作用的配合下,满足了夕卡岩型矿床成矿的需求,形成了铜绿山矿床。  相似文献   

5.
本文对中国十四个接触交代钙夕卡岩矿床和钙-镁夕卡岩矿床中的三百多个样品的石榴子石和辉石成分进行了电子探针分析。不同矿床类型的石榴子石和辉石成分代表着钙夕卡岩矿床的十个矿种(Fe、Fe-Cu、Pb-Zn、W、Sn、Sn-Mo-Bi-W、、W-Bi-Cu-Mo、Cu-Zn、Cu-Sn、W-Zn-Cu)和钙-镁夕卡岩矿床的三个矿种(Fe-Cu、Mo、Pb-Zn)。石榴子石和辉石成分变化范围大,大多数石榴子石是含锰铝榴石+铁铝榴石+镁铝榴石小于15%(摩尔百分数)的钙铝榴石-钙铁榴石固溶体;大多数辉石是含小于5%的锰钙辉石的透辉石-钙铁辉石固溶体。有些Pb-Zn钙-镁夕卡岩矿床中的辉石显示出Mn含量有所增加。只有Sn和W钙夕卡岩矿床及Pb-Zn钙-镁夕卡岩矿床含(Sps+Alm+Pyr)总量大于15%的石榴子石。石榴子石和辉石成分与夕卡岩矿床金属矿化类型之间有某些联系。  相似文献   

6.
铜陵东狮子山铜矿床地质特征及成岩成矿机理研究   总被引:8,自引:0,他引:8  
凌其聪  陈邦国 《矿床地质》1998,17(2):158-164
铜陵东狮子山铜矿为一夕卡岩矿床,但与常见的夕卡岩矿床明显不同。在产状方面,夕卡岩与围岩(大理岩)界线截然,围岩出现重结晶褪色边,夕卡岩边缘有淬火边,与夕卡岩相接触的辉石二长闪长岩出现烘烤褪色边,夕卡岩中出现辉石二长闪长岩角砾;在矿物组成上,具特殊的钾长石+方解石+石英囊状体,其内矿物边界规则,无分带现象,夕卡岩矿物无被交代现象;在结构构造方面出现特征的海绵陨铁结构、豆状构造、流动构造等;在地球化学方面,夕卡岩岩石的微量元素、稀土元素特征与辉石二长闪长岩相似,其中呈填隙状方解石的化学组成、同位素组成显示深源特征;夕卡岩矿物中出现熔融包裹体,均一温度高于920℃;矿体特征与寄主夕卡岩的各方面特征十分相似。这些特征显示该矿床可能是一种高温高密度粘稠的夕卡岩岩浆熔(流)体冷凝结晶演化过程的产物。  相似文献   

7.
内蒙古阿右旗卡休他他铁金矿床属于夕卡岩-热液叠加型矿床。特定岩性、岩浆岩、构造是形成该种类型矿床的基本条件:辉长岩和石英闪长岩与围岩的接触带控制矿床的产出部位,岩体接触带的夕卡岩控制着铁、金矿体的分布范围,层间破碎带和构造裂隙带则控制着铁、金矿体的形态。铁矿化产于中基性岩体和围岩接触的夕卡岩带中,金矿体产在富铁矿体及其附近的夕卡岩中,金矿和铁矿是同一地质作用过程中不同阶段的产物,矿床可能形成于海西中期。  相似文献   

8.
卡而却卡铜多金属矿床是柴达木盆地南缘西段祁漫塔格地区颇具特色的一个破碎蚀变带热液脉状-矽卡岩型矿床。矿区内可见2类围岩蚀变:矽卡岩化和黄铁绢英岩化。前者由印支期似斑状黑云母二长花岗岩侵位引起,在岩体侵入接触面及外接触带围岩的不同岩性界面、构造破碎薄弱带形成含铜多金属矽卡岩透镜体,由透辉石、钙铁辉石、钙铁(铝)榴石、符山石、硅灰石、方柱石和阳起石等一套十分典型的钙矽卡岩矿物组成;后者在矿区西北部的似斑状黑云母二长花岗岩体中形成多条呈NWW向平行展布的黄铜矿化热液蚀变带,构成断裂破碎带控制的细(网)脉浸染状热液脉型矿化。研究认为:卡而却卡铜多金属矿床的形成与印支期侵位、具有浅成和高侵位特点的似斑状黑云母二长花岗岩关系密切,产出的矽卡岩型铜多金属矿与破碎蚀变带控制的细(网)脉浸染状热液脉型铜矿的成岩成矿年龄基本一致,其构造-岩浆活动背景相同,但属不同阶段、不同深度和不同部位发生成矿作用的产物,形成以接触带(或外接触带)矽卡岩型铜多金属矿为主体的、成矿母岩体内的构造断裂发育部位伴有热液脉状铜矿化的复合型矿床。  相似文献   

9.
广东尖山铁矿床内发育了一个完整的钙铝榴石—钙铁榴石系列矿物,它们与矿化有着密切的关系,因此,研究石榴石的标型特征对探讨矿床形成条件是很重要的,对找矿也是有意义的。 一、石榴石的产出特征 尖山矿床赋存在尖山花岗岩体与中—上石炭统壶天群和下二叠统栖霞组碳酸盐岩层的接触带中。从花岗岩体向碳酸盐岩层形成了如下蚀变分带:绿帘石化花岗岩带→透辉石钾长石石英岩带→石榴石透辉石夕卡岩带→石榴石夕卡岩带→钙铁辉石夕卡岩带→大理岩带。钨钼矿化迭加在透辉石钾长石石英岩带中,铁矿化迭加在石榴石夕卡岩和钙铁辉石夕卡岩带中。  相似文献   

10.
方招信  孙庆安  朱恒 《安徽地质》2009,19(2):103-106
世界上含金镁夕卡岩矿床十分罕见。本文简单介绍了安徽淮北三铺地区含金多金属镁夕卡岩矿床的成矿基本地质条件、矿床富镁特征和交代矿化蚀变分带模式。重点研究锶、钡元素在矿床中的迁移规律以及锶/钡比值的分带性,在研究大量分析数据的基础上,分析Sr、Ba分别追随Ca、K元素迁移方向,发现Ba元素由内带向外带迁移、Sr元素由外带向内带的逆向迁移规律,首次指出该镁夕卡岩矿床中的Sr/Ba比值的分带性,确定出Sr/Ba比值0.3~3.0为矿(体)化交代蚀变带,可作为镁夕卡岩型矿床重要的地化找矿标志。  相似文献   

11.
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.  相似文献   

12.
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.  相似文献   

13.
本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。  相似文献   

14.
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提  相似文献   

15.
本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。  相似文献   

16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.  相似文献   

17.
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.  相似文献   

18.
岩石密度和超高压岩石折返速率   总被引:1,自引:3,他引:1  
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。  相似文献   

19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号