共查询到20条相似文献，搜索用时 62 毫秒
1.
川东三叠系飞仙关组白云岩锶含量、锶同位素组成与白云石化流体 总被引：32，自引：10，他引：32
川东飞仙关组白云岩包括微晶白云岩、具原始结构的粒屑白云岩和结晶白云岩等3种主要的结构类型,其中结晶白云岩是重要的天然气储集岩。根据白云岩的锶舍量和锶同位素组成,结合相关岩石学和地球化学资料,本文研究了白云石化过程中锶的迁移和相应的同位素变化。三种类型白云岩具有类似的锶含量,但其(87)~Sr/(86)~Sr 比值均不同程度地高于同期海水值,锶在白云石和方解石(或文石)中分配系数的差别是影响白云石化过程中白云石锶含量最为重要的因素。不同流体中锶的混合方程计算表明:如果白云石化流体是大气淡水和海水的混合流体,则结晶白云岩的白云石化流体相当于94%的大气淡水和6%的海水混合,具原始结构的粒屑白云岩的白云石化流体相当于81%的大气淡水和19%的海水混合,微晶白云岩的白云石化流体相当于92%的大气淡水和8%的海水混合。但极低的锰含量、相对较高的锶含量和包裹体均一化温度等资料均不支持有94%的大气淡水参与了结晶白云岩的白云石化作用,其白云石化流体应是埋藏成岩过程中囚禁的近同期、但是非同期的海源流体,其来源可能与埋藏成岩过程中该时间段蒸发盐的溶解有关。锰含量、锶含量、(87)~Sr/(86)~Sr 比值都表明具原始结构的粒屑白云岩和微晶白云岩的白云石化过程都存在大气淡水的介入,微晶白云岩的白云石化可能与潮坪环境的蒸发泵机理有关;具原始结构的粒屑白云岩的白云石化可能与混合水白云石化作用有关,这类白云岩分布于向上浅滩化旋回滩体的顶部,这是埋藏前或浅埋藏阶段大气淡水与海水混合白云石化作用最容易发生地带。 相似文献
2.
作为川东北地区三叠系飞仙关组天然气气藏最重要储集岩的粒屑白云岩和结晶白云岩的成因始终是沉积和石油地质学家高度关注的研究热点之一.在总结川东北地区三叠系飞仙关组不同类型白云岩形成温度的基础上,通过已有的白云化流体Ca/Mg值和温度之间关系式获得了川东北地区三叠系飞仙关组白云化流体的Ca/Mg值的主要分布范围.结果表明:不同类型白云岩对应的白云化流体具有不同的Ca/Mg值,同时证实了三叠纪海水或与之有关的海源流体、三叠纪海水与大气淡水混合流体的Ca/Mg值都符合在40～130℃区间、甚至更高温度下白云化(白云石沉淀)作用的要求,微晶白云岩和具原始结构的粒屑白云岩可能与地表—近地表的低温、小Ca/Mg值混合流体中相对快速的白云石沉淀作用有关,并形成了相对细的他形白云石;结晶白云岩(包括结构类似的过渡岩石类型、白云石胶结物)可能与埋藏的高温、大Ca/Mg值三叠纪海水或与之有关的海源流体中相对缓慢的白云石沉淀作用有关,并形成了相对粗的自形白云石.白云化流体的Ca/Mg值估算,可望为川东北地区三叠系飞仙关组优质储层白云岩的成因研究提供一些有价值的基础资料. 相似文献
3.
封闭系统中的白云石化作用及其石油地质学和矿床学意义——以四川盆地东北部三叠系飞仙关组碳酸盐岩为例 总被引：9，自引：0，他引：9
作为优质储层的四川盆地东北部三叠系飞仙关组的结晶白云岩是通过埋藏成岩过程的封闭条件下的白云石化作用形成的.岩石所具有的高孔隙度与封闭体系中的白云石化反应:2CaCO3 Mg2 =CaMg(CO3)2 Ca2 有关.埋藏成岩体系中的高锶流体是该封闭条件下白云石化作用的产物,深埋藏条件下的热化学硫酸盐还原作用是锶进一步富集的原因,因而三叠系的大型和超大型天青石矿床的成因与这些因素有关.结晶白云岩极低的锰含量、与同期海水类似的δ13C值表明白云石化流体具有强烈的海源色彩,同时也说明白云石化过程没有与大气水交换;相对较低的δ18O值表明白云石化发生在较晚的埋藏成岩阶段.大多数已有的白云石化机制都是基于近地表成岩条件建立的,系统具有良好的开放性,但开放体系中的白云石化(或白云石沉淀)作用对油气储集空间和与成岩过程元素迁移有关的沉积层控矿床的形成没有多少实际意义.在四川盆地东北部三叠系飞仙关组地层中,作为非储层的微晶或泥晶白云岩以及原始结构保存的粒屑白云岩的白云石化作用主要是在有大气水介入的开放体系中发生的. 相似文献
4.
鄂尔多斯盆地马家沟组白云岩地球化学特征及白云岩化机制分析 总被引：8，自引：1，他引：7
由岩石学和地球化学研究表明:马家沟组白云岩主要为泥微晶白云岩和晶粒白云岩两种。泥微晶白云岩常与石膏或岩盐伴生,阴极发光呈中等橘红色光,有序度低,具较高的Sr、Na含量,与泥晶灰岩具相似的δ13C分布区间及稀土元素配分模式,Sr同位素值接近同期海水,包裹体均一温度近于地表温度,表明白云岩化流体为与海水密切相关的高盐度流体,为准同生白云岩化,可用蒸发泵模式解释其成因。晶粒白云岩伴生矿物少,偶见黄铁矿,晶体结构多曲面他形,阴极发光为中-弱橘红色光,有序度高,Sr含量较低,Na、Mn含量与泥微晶白云岩相近,稀土元素配分模式与泥微晶白云岩相似且与泥微晶灰岩相近,δ13C分布区间与泥微晶灰岩趋于一致,包裹体均一温度较高,说明晶粒白云岩与泥微晶白云岩具相似的白云岩化流体,该种白云岩为埋藏白云岩化,上覆沉积物不断压实封存卤水使其侧向流动为白云岩化提供了源源不断的Mg离子。 相似文献
5.
川东北地区飞仙关组白云岩成岩作用与系统划分 总被引：1，自引：0，他引：1
通过对川东北地区下三叠统飞仙关组白云岩的结构-成因分类、成岩作用方式、成岩演化序列和铁、锰、锶微量元素,碳、氧、锶稳定同位素地球化学特征的综合研究,从盆地大尺度的成岩作用组合特征出发,按“水文体制”将飞仙关组白云岩划分为4个成岩系统:(1)准同生阶段孔隙卤水成岩系统;(2)早-中成岩阶段地层压实热卤水成岩系统;(3)晚成岩阶段混合热卤水成岩系统;(4)构造隆升阶段油田热卤水成岩系统.各阶段成岩系统白云化流体性质和来源具有一定的亲缘性和继承性发展演化特点,但水－岩相互作用过程、成岩方式、产物和组合特征各不相同,与储层发育密切相关的成岩方式主要是各成岩系统中的多期次埋藏白云化和溶蚀作用.根据各成岩系统中成岩作用与储层在时间-空间上的耦合与匹配关系,可将优质白云岩储层和油气藏控制因素归结为3点:(1)早-中成岩阶段埋藏白云化为储层发育基础;(2)晚成岩阶段埋藏白云化扩大,提高了储层分布范围与质量;(3)构造隆升阶段破裂、TSR和溶蚀作用是形成飞仙关组高效气藏的关键. 相似文献
6.
在川东北地区下三叠统飞仙关组沉积相模式研究成果的基础上,详细研究了区内鲕粒白云岩、具残余鲕粒结构的粗粉晶-细晶白云岩、泥微晶白云岩、藻纹层白云岩、粗粉晶-细晶白云岩的岩石学特征,并结合碳氧同位素、微量元素、流体包裹体3种地球化学特征资料认为:鲕粒白云岩和具残余结晶鲕粒白云岩为混合水白云石化作用形成;泥微晶白云岩和藻纹层白云岩为回流渗透白云石化作用形成;粗粉晶-细晶白云岩为埋藏白云岩化作用形成。 相似文献
7.
川东兴隆场地区长兴组白云岩地球化学特征及流体来源 总被引：1，自引：0，他引：1
四川盆地东部长兴组—飞仙关组礁滩相储层为重要的天然气勘探目的层,优质储层的岩性多为白云岩,且主要分布于开江-梁平陆棚的东西两侧。川东兴隆场地区位于开江-梁平陆棚西侧有利相带的东南端,长兴组白云岩层段为该区主力产气层,且白云岩主要分布在台地边缘礁滩相等易于发生暴露的高能沉积相带。明确了白云岩宏观分布的控制因素,以岩石结构及Mg/Ca值和有序度为基础,结合岩石地球化学特征,对川东兴隆场地区上二叠统长兴组白云岩成因进行分析。研究结果表明兴隆场地区长兴组白云岩是在埋藏条件下,同层位的泥晶灰岩及泥灰岩中封存的浓缩海水通过压实作用排挤进入碳酸盐沉积物交代灰岩形成的。有如下证据:①飞仙关组沿缝合线发育的自形白云石化学组成(CaO含量均值30.94%,MgO含量均值20.76%)与长兴组白云石化学组成(CaO含量均值30.51%,MgO含量均值21.28%)相近,表明二者成因及白云化流体具有相似性,推断压实流体可能为长兴组白云岩白云化流体;②长兴组白云岩δ13C介于1‰～2.5‰之间,δ18O介于-6‰～-4‰之间,分布在同期古海水的δ13C(0～5.8‰)、δ18O(-7.5‰～-3.5‰)变化范围内,并与全球典型埋藏白云岩δ13C、δ18O分布区间一致,说明白云化流体具有同期海水性质,且形成于埋藏成岩环境中;③长兴组白云岩的87Sr/86Sr值(0.707108～0.707507)覆盖在了川东北晚二叠世海水Sr同位素(0.706620～0.707742)的变化范围内,证明白云化流体来源于同期海水;④长兴组白云岩稀土元素表现为LREE亏损、HREE富集的海水稀土元素特征,表明白云化流体具有海源流体的性质;⑤长兴组碳酸盐岩Fe含量均较低(<2000×10-6),但长兴组白云岩相对于灰岩具有较高的Mn含量(69×10-6～90×10-6,均值为76×10-6)和较强的阴极发光性,反映了白云岩形成于埋藏的还原环境中。 相似文献
8.
根据岩心、岩石铸体薄片、岩石物性分析化验资料并结合测井资料,对四川盆地龙岗气田三叠系飞仙关组碳酸盐岩储集层特征进行了研究。结果表明,研究区飞仙关组孔隙较发育、物性较好、能作为优质储集层的基本上都是白云岩类,尤其是鲕粒白云岩。初步认为这类鲕粒白云岩的形成主要与早期白云化作用（可能为混合水白云化）有关。结合区域地质背景,认为飞仙关期相对海平面呈振荡下降,其对早期白云化有重要控制作用,并在垂向上形成飞三1、飞二1两个白云化旋回,而优质储集层主要发育于这两个旋回中。 相似文献
9.
川东北普光气田下三叠统飞仙关组白云岩成因——来自岩石结构与Sr同位素和Sr含量的证据 总被引：3，自引：1，他引：2
研究了川东北普光气田下三叠统飞仙关组白云岩储层的岩石结构Sr的含量和Sr同位素组成,讨论了它的成因,飞仙关组优质储层为成岩期埋藏交代白云化作用的产物,来自岩石结构和Sr同位素和Sr含量的证据包括如下几个方面:(1)与准同生白云岩比较,埋藏白云岩的岩石结构和Sr同位素和Sr含量地球化学特征与前者有显著差别;(2)飞仙关组所有各类碳酸盐岩(或矿物)具有早三叠世海水Sr同位素组成特征,~(87)Sr/~(86)Sr比值变化范围为0.706588～0.708187,覆盖了全球早三叠世海水Sr同位素的变化范围(0.7076～0.7078),平均值0.707656与全球早三叠世平均值(0.707743)基本一致;(3)埋藏白云岩~(87)Sr/86Sr比值变化范围为0.707122～0.707419,平均值0.707421,都略低于全球早三叠世海水Sr同位素变化范围和平均值,但与已报道的川东北早三叠世飞仙关期海水Sr同位素变化范围(0.707330～0.707383)和平均值(0.707350)都非常接近,说明白云石化流体具有强烈的川东北地区早三叠世飞仙关期海水Sr同位素组成特征;(4)综合岩石结构、Sr同位素和Sr含量地球化学特征,证明飞仙关组白云岩储层为成岩期埋藏交代作用产物,白云石化流体来自地层中高Sr和高盐度的海源地层水. 相似文献
10.
《地质科技情报》2021,40(1)
云南禄劝乌东德水电站是我国第三座超千万千瓦级水电站,其建设所采用的混凝土人工骨料来源于坝址下游施期料场的中元古代落雪组灰岩。在骨料勘察和实际开采过程中,发现灰岩与白云岩在同一层位产出,其岩性变化界线切割岩层面,该类现象为工程地质研究中所罕见,引起了高度关注。以施期料场灰岩-白云岩过渡带和骨料开采残留的一处白云岩凸起岩块为重点研究对象,开展了野外地质调查、室内岩相学、微区矿物形貌和成分、碳氧同位素以及流体包裹体分析,深入探讨了研究区碳酸盐岩成岩演化和岩相转变过程与机理,提出了新的白云岩化成因模式。结果表明:(1)矿物形貌和空间分布特征指示与灰岩过渡的白云岩为早期灰岩经过后期白云岩化形成;(2)白云岩中发育的斑马纹构造、鞍状白云石及其伴生的硫化物和碳质物等,指示其经历了热液白云岩化过程。鞍状白云石中流体包裹体的均一温度(183～215℃)显著高于围岩方解石中流体包裹体均一温度(102～152℃);(3)白云岩普遍具有较轻的O同位素值(δ~(18)O=-13.3‰～-7.8‰),而其中鞍状白云石的δ~(18)O最低(-13.3‰),表明它们可能为热液流体直接沉淀的产物,而其他白云岩由于受热液流体影响程度较低而具有较低的包裹体均一温度和较高的δ~(18)O值;(4)乌东德地区近直立的岩层产状和断裂可能为热液流体运移提供了通道,而其上覆的近水平震旦系灯影组厚层白云岩则起到了封堵作用,使热液流体在不整合面之下与灰岩发生长时间反应;热液流体的运移方向决定了最终的热液白云岩的分布。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献