首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 78 毫秒
1.
黑辰砂和硒汞矿是HgS-HgSe系列的端员矿物。黑辰砂产于湘黔汞矿带大洞喇、纸坊、茶田汞矿床,硒汞矿产于新晃汞矿床外围的蚀变石英岩中。本文通过对黑辰砂和硒汞矿的物理光学性质、化学成分、X光衍射及红外吸收光谱的研究,表明这两个矿物上述诸方面特征均很相似,但又表现出有规律的变化。  相似文献   

2.
新矿物—硒锑矿   总被引:6,自引:8,他引:6  
陈露明  李德忍 《矿物学报》1993,13(1):7-11,T001
硒锑矿是一种锑的硒化物新矿物,化学式为(Sb_(1.87)Hg_(0.06) Cu_(0.05) As_(0.01))_(1.99)(Se_(2.99)S_(0.02))_(3.01),产于贵州省504铀汞钼多金属矿床内的含铀方解石脉中。颗粒细微,几微米至十几微米,呈他形粒状和自形针状,集合体为放射状。肉眼观察为黑色。反光显微镜下为白色、非均质。R′_α=39.7,R′_γ=42.2。计算密度为5.88g/cm~3。晶胞参数:a=1.1593(3);b=1.1747(3),c=0.3984(1)nm。斜方晶系,空间群为Pbnm。共生矿物有硒汞矿、白硒铁矿、硒铅矿以及尚未确定的大量硒矿物。此外,还有黄铁矿、胶黄铁矿、闪锌矿、方铅矿、辰砂、沥青铀矿,赤铁矿和方解石。其形成温度为135~148℃。  相似文献   

3.
湘西—黔东汞矿带硒的赋存特征   总被引:2,自引:0,他引:2  
在湘西-黔东汞矿带中,硒主要替代硫以类持同象的形式存在辰砂中,少部分见于黑辰砂的硒汞矿中,辰砂中硒含量的高低与其颜色,晶形,粒度,生成期以及产出部件有关,硒是湘黔汞矿带标型微量指示元素。  相似文献   

4.
张元珍  宋大康 《矿物学报》1992,12(1):83-86,T001
硒汞矿产于甘肃省拉尔玛金矿床中,主要共生矿物有石英、重晶石、辉锑矿、黑辰砂、自然金等。硒汞矿呈铅灰色到黑色,金属光泽,性脆。粒度0.01~0.36mm。比重D=8.27,摩氏硬度2.5。电子探针定量分析结果的平均值(%):Hg 71.50,Se 25.21,S 1.88,Au 0.19,Ag 0.07,Te 0.09,As 0.06,Sb 0.04,Fe 0.04,总和99.08。空间群。a=0.6081(1)nm,Z=4。  相似文献   

5.
邛莫金矿床中块硫锑铜矿含硒性及其特征   总被引:3,自引:0,他引:3  
硒的块硫锑铜矿产于西秦岭邛莫金矿床中,与其伴生的矿物有硒汞矿、硒铅矿、硒锑矿、斜方硒镍矿、硒铜镍矿、硒质辉锑矿、自然金以及石英、重晶石等。 含硒的块硫锑铜矿平均显微硬度VHN50=247.5kg/mm2,相当于摩氏硬度4.2。电子探 针分析结果(w,%)为:Sb 25.79,Cu 38.20,S 21.12,Se 1 2.76,Hg 0.0 0~1.49(平均0.58),Ag 0.00~0.33(平均0.09),As 0.00~2.01(平均0.76)。根据成分中S e/(S+Se)比值(原子比)<0.2抑≥0.2,可将所测矿物划分为含硒质块硫锑铜矿与硒质块硫锑 铜矿。它们的化学分子式分别为: (Cu2.84Hg0.01)2.85(Sb1.00A s0.07)1.07(S3.54Se0.46) 4.00和(Cu3.05Hg0.03)3.08(Sb1.07As0.03) 1.10(S2.77Se1.23)4.00。代表性的反射率(%): (470nm) Rγ'=22.84~22.50, Rα'= 27.92~27.99; (550 nm) Rγ'= 22.63~22.76, Rα'=2 7. 79~28.11; (590nm) Rγ'=22.92~22.08, R α'=28.27~28. 72; (650nm) Rγ'=23.08~23.76, Rα'=28.79~29.13。  相似文献   

6.
辰砂HgS是汞矿物中最主要的工业汞矿物。辰砂的理论成份是:汞86.2%;硫13.8%。常见杂质元素有:砷、锑、铋、硒碲等。这些痕量元秦的特征与含量对辰砂的成矿形成阶段,世代的研究有着重要的意义。因此,对辰砂单矿物的分析不仅需要测定主元素,而且对这些痕量元素也应进行  相似文献   

7.
自然界中的辉锑矿-硒锑矿矿物系列   总被引:3,自引:0,他引:3  
自然界中的辉锑矿-硒锑矿系列发现于西秦岭寒武系拉尔玛、邛莫金矿床中。与其密切共生的矿物有硒汞矿、硒铅矿、硒质块硫锑铜矿、硒镍矿、自然金以及石英、重晶石等。辉锑矿–硒锑矿系列的显微压力硬度为101.26~103 kg/mm2。主要元素的质量分数为: Sb 43.78%~73.81%,S 0.00%~28.76%,Se 0.00%~49.72%(但缺乏30.59%~43.04%之间的数据)。根据电子探针分析数据中Se/(S+Se)比值(原子比),可将所测矿物系列划分为(含硒质)辉锑矿、硒质辉锑矿、硫质硒锑矿和(含硫质)硒锑矿。矿物系列代表性的反射率(%):(470 nm)Rg’=42.62~47.62,Rp’=30.83~40.55;(550 nm)Rg’=41.84~46.75,Rp’=31.48~38.85;(590 nm)Rg’=42.25~46.63,Rp’=30.73~39.46;(650 nm)Rg’=43.30~46.48,Rp’=30.01~41.56。两个含Se量为3%~5%含硒质辉锑矿的晶胞参数值为:a=1.120 9~1.121 2 nm,b=1.1299~1.130 3 nm,c=0.384 7~0.384 9 nm;而硫质硒锑矿、硒锑矿的晶胞参数值分别为:a=1.159 1~1.159 3 nm;b=1.172 4~1.174 7 nm;c=0.394 1~0.398 4 nm。晶胞参数的变化与矿物中硫、硒含量变化密切相关。  相似文献   

8.
近年来,作者在对川西北地区拉尔玛——邛莫层控型金铜铀建造矿床物质组分研究中,不仅首先发现了在含矿层位中,凡金矿化显著部位均不同程度地出现铂族元素的富集,而且还首先发现了在自然界,特别是在金矿床中很稀少的硒的独立矿物,如灰硒汞矿、灰晒铅矿、(含)硒辉锑矿,且(含)硒辉锑矿尚属首次发现的矿物。拉尔玛—邛莫金铜铀建造矿床见原稿位于西秦岭南亚带下寒武统地层中。含矿层位由硅岩、板岩组成,厚度可达近千米。现已探明的矿体80%以上产于硅岩中。赋矿的硅岩层的SiO_2平均含量为94.13%(n=15)。业已  相似文献   

9.
我国主要汞矿床的辰砂硫同位素组成   总被引:7,自引:0,他引:7  
刘平 《矿床地质》1992,11(3):213-220
汞矿是我国重要有色金属矿产之一,和世界相比,有其独特之处。据26个汞矿床(点)229件辰砂硫同位素测定值统计,绝大部分辰砂的δ~(34)S都是正值,且与含矿地层中硫酸盐δ~((?)4)S的差值,大致有一个确定的变化范围。辰砂的δ~(34)S比含矿地层中硫酸盐的δ~(34)S平均低9.35‰。从时间的总体上看,各时代地层中辰砂的δ~(34)S变化曲线与海洋硫酸盐的δ~(34)S时间变化曲线,几乎具有相同的演化趋势。因而,在一般情况下,辰砂中的硫都是来自含矿地层中的海洋硫酸盐。  相似文献   

10.
南秦岭早古生代地层含硒量及硒的分布规律   总被引:17,自引:2,他引:17       下载免费PDF全文
本文对南秦岭大巴山区主要分布的早古生代地层各种岩石的含硒量的研究结果表明,含硒量与岩石的岩性和形成时代密切相关,与岩石的含碳量和含硫量成正线性关系。碳质板岩和石煤相对于其他类岩石的含硒量高,碳质板岩一般为6×10~(-6)~35×10~(-6),石煤的含硒量为8×10~(-6)~45×10~(-6);中、下寒武统和志留系大贵坪组的碳质板岩和石煤含硒量较高,可达30×10~(-6)。同时,下寒武统的含硒量远远大于早古生代其他层位同类岩石的平均含硒量,是同类岩石平均含量的5~10倍。如碳酸盐岩的含硒量为2×10~(-6)~4×10~(-6);细粒岩石的含硒量较粗粒岩石的含硒量高,下志留统陡山沟组的厚层状到中厚层状砂岩、粉砂岩和上寒武统的砾屑灰岩的含硒量相近,约0.05×10~(-6)~0.08×10~(-6),是本区最低的。因此,并非本区所有岩石都富硒。  相似文献   

11.
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.  相似文献   

12.
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提  相似文献   

13.
本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。  相似文献   

14.
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.  相似文献   

15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.  相似文献   

16.
本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。  相似文献   

17.
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.  相似文献   

18.
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.  相似文献   

19.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.  相似文献   

20.
岩石密度和超高压岩石折返速率   总被引:1,自引:3,他引:1  
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号