共查询到20条相似文献，搜索用时 62 毫秒
1.
东准噶尔北缘老山口铁铜金矿区侵入岩LA-ICP-MS锆石U-Pb定年及地质意义 总被引：13，自引：0，他引：13
老山口铁铜金矿区位于准噶尔北缘的喀拉通克—卡拉先格尔成矿带南段,矿化与岩浆侵入活动有关。本文利用LA-ICP-MS锆石U-Pb定年方法对老山口铁铜金矿区的中粒闪长岩、正长岩、黑云母闪长岩和闪长玢岩进行了年代学研究,获得其年龄分别为353.8±1.9Ma、366.3±1.9Ma、3±2.3Ma和379.7±3Ma,表明矿区存在三期岩浆活动。其中黑云母闪长岩和闪长玢岩的年龄,在误差范围内一致,它们可能为中泥盆世同源岩浆演化的产物,且岩体侵入时代与准噶尔洋俯冲阶段花岗岩及卡拉先格尔斑岩铜矿带含矿斑岩年龄较一致,表明其可能是板块俯冲阶段的产物。闪长岩和正长岩的年龄分别为353.8±1.9Ma和366.3±1.9Ma,与东准噶尔北部青格里河下游一带后碰撞花岗岩类和布尔根一带后造山伸展A型花岗岩的年龄接近,而地球化学特征却存在差异,说明老山口正长岩和闪长岩体是俯冲晚期阶段的产物。根据地质特征,老山口铁铜金矿的形成与闪长岩及闪长玢岩侵入有关,因此岩体年龄也限定了矿区存在两期铁铜金矿化,即379Ma左右和354Ma左右。 相似文献
2.
铜绿山铜金(铁)矿床位于长江中下游的鄂城-大冶-瑞昌铜金(铁)成矿带的西北部,阳新侵入岩体西北端.矿体赋存于下三叠统大冶群第四至第七岩性段.铜绿山石英正长闪长玢岩体与铜绿山矿床成矿关系密切,是该矿床的成矿母岩.笔者对铜绿山石英正长闪长玢岩体进行了锆石SHRIMP U-Pb定年,获得岩体的形成年龄为(146±1)Ma(95%可信度,MSWD=1.6).表明铜绿山铜金矿床的成矿母岩形成于晚侏罗世-早白垩世早期.鉴于接触交代成矿作用与成矿岩体的结晶时问大致同时,铜绿山矽卡岩型铜金(铁)矿床的形成时间亦发生于晚侏罗世-早白垩世. 相似文献
3.
4.
多龙矿集区是我国首个铜金属资源量达到2 000万t以上的世界级铜金矿集区,外围找矿潜力依然十分巨大.首次报道矿集区东部色那东地区花岗斑岩体和闪长玢岩体的地质年代学及地球化学测试结果,为总结区域成矿规律提供基础数据.通过精确的锆石测年,全岩主、微量元素和锆石Hf同位素测试发现,上述岩体的成岩年龄均为123±2 Ma,岩石的形成与俯冲洋壳板片部分熔融有关,源区有明显幔源组分加入.色那东地区侵入岩与矿集区含矿斑岩空间上集中侵入,且同属早白垩世岩浆活动产物,暗示其具有相同动力学背景,是班公湖-怒江洋俯冲末期-碰撞初期弧-弧"软"碰撞的产物,其侵入过程为成矿提供了热量和流体来源,显示该地区仍有较好的成矿潜力. 相似文献
5.
6.
7.
8.
东秦岭莲花沟岩体锆石U-Pb年代学研究及其地质意义 总被引：2，自引：0，他引：2
本文是笔者近几年在陕西省洛南县灵口地区开展钼多金属矿找矿评价和研究工作中,利用LA—ICPMS锆石U—Pb法新获得的莲花沟岩体同位索年代学数据的研究成果。其中的闪长岩单元年龄为（137±2）～（158±2）Ma,加权平均年龄为（147．7±2．0）Ma,二长花岗斑岩为（115±2）～（164±3）Ma,加权平均为（144．5±8．9）Ma。两组年龄数据谐和性较好,可代表两个单元岩石或岩体的成岩年龄。由此,提出莲花沟岩体应和金堆城、南泥湖、三道庄等一些大型一超大型钼多金属矿床相关的燕山晚期（160～110Ma）小侵人体为同一构造岩浆旋回作用产物,且提示在东秦岭地区还有发现新的同类型岩体和钼多金属矿床的潜在条件。 相似文献
9.
江西九瑞地区宝山斑岩型铜多金属矿床锆石U-Pb和辉钼矿Re-Os年龄及其地质意义 总被引：6，自引：2，他引：4
宝山斑岩型铜多金属矿床位于九瑞矿集区西北部,隶属于九江-瑞昌铜金矿田,为长江中下游铜金成矿带、大冶-九江成矿亚带的组成部分。对宝山岩体的花岗闪长斑岩进行LA-MC-ICP-MS U-Pb同位素测年,获得其锆石U-Pb年龄为(147.81±0.48)Ma(MSWD=1.07);首次对宝山矿床的辉钼矿进行Re-Os同位素定年,获得矿床的成矿年龄:6件辉钼矿的Re-Os同位素模式年龄范围为(146.1±2.2)Ma~(148.7±2.0)Ma,加权平均年龄为(147.42±0.84)Ma,等时线年龄为(147.7±1.2)Ma。成岩年龄与成矿年龄在误差范围内一致。辉钼矿的Re含量指示宝山矿床的成矿物质来自于壳幔混源。宝山矿区的成岩、成矿时代与九瑞矿集区典型岩体和矿床的成岩、成矿时代相似,也与长江中下游地区铜陵、安庆和鄂东南(部分地区)的典型铜多金属矿床的成岩、成矿时代基本一致,都属于长江中下游成矿带早白垩世多金属成矿事件的一部分。 相似文献
10.
西藏多龙矿集区拿顿铜金矿床成矿时代的厘定及其找矿指示意义 总被引：2，自引：1，他引：1
西藏多龙矿集区是中国新发现的具有世界级规模的铜金矿集区。目前，该矿集区的中部和北部已发现多个斑岩型和斑岩-浅成低温热液型矿床，而区内西南部也发现了多个铜金矿床，指示了良好的找矿潜力。拿顿是矿集区内西南部具有代表性的铜金矿床，矿化类型为浅成低温热液型。野外地质调查表明，该矿床成矿作用可分为2个阶段，早阶段矿化主要赋存于角砾岩筒中，并与角砾岩筒同时形成，而晚阶段矿化主要以脉体形式产出，切穿角砾岩筒及早阶段矿化。年代学研究结果显示，角砾岩筒中以角砾形式产出的花岗闪长斑岩锆石U-Pb年龄为（117.5±0.7）Ma，被后期花岗闪长斑岩（116.1±1.3Ma）侵入，由此指示角砾岩筒及早阶段矿化形成于116~117 Ma。此外，明矾石40Ar-39Ar年代学研究进一步表明，晚阶段石英-明矾石-硫化物脉形成于（111.3±2.5）Ma，这也证实该矿区成矿作用具有多阶段性特征。文章结果指示，拿顿铜金矿可能存在多期与浅成低温热液型矿化有关的成矿岩体，并且多龙矿集区内也可能存在更多形成于111 Ma而未被发现的矿床。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
Mercury,arsenic, antimony,and selenium contents of sediment from the Kuskokwim River,Bethel, Alaska,USA 总被引：1，自引：0，他引：1
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources. 相似文献