首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
新疆阿尔泰蒙库铁矿床的成矿流体及成矿作用   总被引:30,自引:8,他引:22  
蒙库大型铁矿床赋存于上志留统—下泥盆统康布铁堡组变质火山-沉积岩系中,容矿岩石为石榴子石矽卡岩、变粒岩、浅粒岩和大理岩。矿体总体顺层分布,空间上与矽卡岩密切相关。研究表明,矽卡岩期石榴子石以发育玻璃质熔融包裹体、流体熔融包裹体和流体包裹体为特征,晚期矽卡岩阶段矿物中发育液相包裹体,变质期矿物中主要发育液相包裹体和含子矿物包裹体。矽卡岩期熔融包裹体的均一温度为1100℃,早期矽卡岩阶段流体包裹体均一温度变化于193~499℃,在450℃、350℃和230℃出现峰值。中期矽卡岩阶段均一温度变化于236~550℃,峰值为350℃。区域变质期均一温度介于132~513℃,在350℃、230℃和190℃出现峰值。流体包裹体的盐度w(NaCleq)介于1.23%~60.31%,流体密度变化于0.60~1.16g/cm3。石榴子石、石英和方解石的δ18OSMOW变化于0.2‰~8.4‰,δ18OH2O介于-5.1‰~5.33‰,δD为-127‰~-81‰,表明矽卡岩期成矿流体主要是岩浆水,混合少量大气降水;变质期流体主要为大气降水,为混合变质水。方解石δ13CPDB变化于-6.1‰~-2.3‰,表明流体中碳来自深部或地幔。成矿时代为早泥盆世早期(略晚于404~400Ma),成矿作用与矽卡岩的退化变质作用有关。  相似文献   

2.
内蒙古车户沟钼铜矿成矿年代学及成矿流体特征研究   总被引:2,自引:1,他引:1  
孟树  闫聪  赖勇  舒启海  孙艺 《岩石学报》2013,29(1):255-269
内蒙古车户沟斑岩钼铜矿床位于西拉木伦钼矿带内.含矿花岗斑岩的LA-ICP-MS锆石U-Pb年龄为251.6±3.2Ma,9件辉钼矿样品Re-Os同位素等时线年龄为250.2±7.2Ma,表明成矿作用发生在早三叠世.车户沟钼铜矿床成矿流体演化可分为矿前阶段、早阶段、中阶段和晚阶段.矿前阶段以斑晶石英+磁铁矿为标志,流体以高温、低盐度、富CO2为特征;早阶段是辉钼矿沉淀的主要阶段,流体包裹体均一温度分布范围为210 ~ 423℃,盐度范围为5.3% ~45.8% NaCleqv,部分不同类型不同盐度的包裹体密切共生,但均一温度接近,指示沸腾作用发生;中阶段为黄铜矿沉淀的主要阶段,未见含CO2包裹体,流体包裹体均一温度为210 ~ 391℃,盐度范围为1.7% ~43.8% NaCleqv;晚阶段为石英-碳酸盐±黄铁矿脉,只发育富液相水溶液包裹体,均一温度低于260℃,盐度为2.4%~11.4% NaCleqv.因此,车户沟矿床成矿流体由初始的高温、富CO2,经沸腾作用和CO2逃逸,演化为低温、贫CO2.车户沟氢氧同位素特征早阶段流体(δ18OH2o=5.1‰~5.7‰,δDH2o=-91‰ ~-88‰)属于岩浆热液,中、晚阶段(δ18OH2O=-5.1‰~4.2‰,δDH2O=-105‰~-84‰)介于岩浆水和大气降水之间,指示成矿过程中有大气降水加入.  相似文献   

3.
王志高 《地质与勘探》2014,50(6):1076-1086
高家堡子银矿床是19世纪90年代在辽东地区发现并探明的一处大型独立银矿床,赋存于古元古代辽河群大石桥组大理岩中。主要矿石类型为硅化大理岩型和硅质岩型;热液成矿作用分为早期多金属硫化物-石英阶段及晚期银矿物-石英阶段。流体包裹体研究表明,早阶段石英中主要发育气液两相原生流体包裹体,均一温度180~260℃,盐度4.78%~9.47%,成矿流体属中温、低盐度的H2O-Na Cl体系;晚阶段石英中主要发育有气液两相原生流体包裹体,均一温度164.7℃~185.2℃,盐度2.76%~4.94%,成矿流体属低温、低盐度的H2O-Na Cl体系。流体包裹体碳、氢、氧同位素研究表明早阶段δDV-SMOW为-90.2‰~-92.6‰,δ18OH2O为2.1‰~4.9‰,δ13CV-PDB为-7.7‰~-17.7‰,反映成矿流体主要来源为岩浆水,伴随有少量大气降水;晚阶段δDV-SMOW为-117.1‰~-117.7‰,δ18OH2O为-10.2‰~-11.3‰,表明成矿流体主要来自大气降水。因此,高家堡子银矿床热液叠加成矿作用流体属中低温、低盐度H2O-Na Cl体系,早期以岩浆水为主,晚期主要来自大气降水。  相似文献   

4.
广西栗木钨锡铌钽矿区流体包裹体及氢氧同位素研究   总被引:2,自引:0,他引:2  
刘翔 《地质与勘探》2016,52(6):1016-1028
本文通过对广西栗木矿区金竹源矿床和水溪庙矿床的流体包裹体研究,得出该矿区流体包裹体主要有两相H_2O-NaCl和H_2O-NaCl-CO_2两种类型。显微测温结果表明:两相H_2O-NaCl型流体包裹体均一温度主要集中于181.9~258.8℃,盐度w(Na Cleq)主要集中于4.01%~6.87%,密度0.690~0.988 g/cm3;H_2O-NaCl-CO_2型流体包裹体均一温度为178.5~331.1℃,主要集中在两个温度段,分别为高-中温段(265.3~315.5℃)和中-低温段(202.3~264.1℃),盐度w(NaCleq)主要集中在0.21%~5.05%,密度为0.678~0.886 g/cm3。栗木矿区成矿流体有两个温度集中段,且具有低盐度、低密度的特征。氢氧同位素研究结果表明:金竹源矿床钨锡铌钽矿化花岗岩石英δD值为-73.6‰~-62.8‰,δ~(18)OV-SMOW值为7.5‰~8.9‰,计算得δ~(18)OH2O值为6.00‰~7.40‰;水溪庙矿床钨锡铌钽矿化花岗岩石英δD值为-73.8‰~-58.3‰,δ~(18)OV-SMOW值为11.0‰~13.2‰,计算得δ~(18)OH2O值为9.50‰~11.70‰,水溪庙矿床含钨锡石英脉石英δD值为-75.3‰~-56.6‰,δ~(18)OV-SMOW值为11.8‰~14.1‰,计算得δ~(18)OH2O值为2.20‰~4.50‰。栗木矿区钨锡铌钽矿化花岗岩成矿流体来源于岩浆水,含钨锡石英脉成矿流体来源于岩浆水和大气降水的混合流体。  相似文献   

5.
新疆萨喀尔得铜矿属中低温热液型,该矿石英和方解石样品中^δ13CPDB值为-17.3‰— -0.7%,δ^18OSMOW为16.2‰-22.4‰ δ18OH2O 水值为6.9‰-12.5‰水值为6.9‰-12.5‰,8D变化于-73.8‰—-52.4‰之间。研究表明,成矿流体主要来源于深部发生循环加热的建造水,并混合变质水和岩浆水;成矿早期流体中的C主要来源于地层水或大气降水,晚期有深部岩浆水的加入。^δ^34S值变化范围为0.2‰-6.1%o,表明流体中的S主要来自岩浆或上地幔。  相似文献   

6.
甘肃大水金矿床成矿流体特征与来源   总被引:5,自引:1,他引:4       下载免费PDF全文
产于西秦岭南缘的大水金矿是一个新型金矿床。作者在前人研究的基础上,通过对大水金矿床流体包裹体的较系统研究认为,大水金矿床的方解石中的包裹体以气液包裹体为主。流体包裹体气相成分的CH4、CO、H2的含量反映属氧化环境;液相成分中阴离子以SO42-为主,Cl-次之;阳离子以K+为主,Na+次之。Au在成矿流体中以AuSO42-络合物的形式迁移。矿床成矿温度为120℃~220℃,属中低温范畴。w(NaCleq)盐度为2.7%~9.1%,密度为0.875~0.970g/cm3。流体水的δD值为-101‰~-61‰,δ18O(SMOW)为-0.3‰~19.42‰,δ18OH2O为-4.32‰~8.33‰,显示早期成矿流体来源于岩浆水,晚期成矿流体为岩浆水与大气降水的混合;δ13C值趋向热液成因。综合分析认为该矿床为一层控—浅成-超浅成岩浆期后中低温热液交代型金矿床,为多次构造—岩浆作用的产物。  相似文献   

7.
豫西南的石板沟金矿床是一个与剪切带有关的脉状金矿。该矿床流体包裹体的系统分析结果表明:镜下石英中流体包裹体类型丰富多样。据室温状态下流体包裹体的相态、加热状态下流体包裹体的性状及产出特征。鉴别出原生富气包裹体、原生富液包裹体、原生舍子矿物多相包裹体、次生富液包裹体和次生纯液包裹体等五种类型。流体包裹体显微测温数据的统计结果显示均一温度(Th)在380~110℃之间,成矿流体最低捕获压力估计在13~74MPa之间:盐度估计在2.3%~43.0%NaCI之间;密度估计在0.84~1.15g/cm^3之间。流体组份属K^ -Na^ -Ca^2 -Mg^2 -HCO3^--CI^--SO4^2-体系。流体包裹体氢、氧和碳等稳定同住素测试结果显示δ^18OH2O为-2.49‰~-1.99‰,δDH2O为-24.0‰~33‰,δ^13Cco2为-11.12‰~-14.59‰。综合研究认为该矿床不同矿化类型的成矿流体性质不同,具有多来源特征,成矿与剪切带和中低温热液作用有关,可能是岩浆作用与动力变形变质作用紧密配合的结果。  相似文献   

8.
哈图金矿床位于新疆北部准噶尔盆地西缘哈图断裂和安齐断裂夹持的狭长地带中。矿床受安齐断裂及其周围伴生的次一级断裂的控制,主要产出石英脉型和蚀变岩型2种金矿体。根据矿物共生关系和脉体穿插关系,将哈图金矿床从早到晚划分为3个成矿阶段。石英脉流体包裹体研究显示,矿体存在3种类型的流体包裹体,分别为Ⅰ型:富液相L+V两相包裹体;Ⅱ型:富气相L+V两相包裹体;Ⅲ型:CO2-H2O型三相包裹体。早阶段发育Ⅰ型、Ⅱ型和Ⅲ型包裹体,均一温度293~379℃,流体盐度为1.0%~5.7%。中(主)阶段发育Ⅰ型、Ⅱ型和Ⅲ型包裹体,均一温度213~291℃,流体盐度为0.5%~5.9%。晚阶段只发育Ⅰ型包裹体,均一温度148~216℃,流体盐度为1.4%~4.0%。经过压力和深度计算,成矿压力为49~97 MPa,对应深度在4.8~9.4 km。根据哈图金矿石英的δ18OV-SMOW值为20.4‰~21‰,计算得到平衡水的δ18OH2O值在8.6‰~14.7‰,同时测得石英包裹体水的δ18DH2O为-77.2‰~-64.5‰。和前人研究结果对比,认为哈图金矿床为造山型中-低温热液金矿床,成矿流体是以大气降水为主体受岩浆和变质影响的低盐度CO2-H2O体系。  相似文献   

9.
得耳布尔矿床是产于大兴安岭北段额尔古纳地块内的大型铅锌银矿床,本文通过对闪锌矿、石英进行流体包裹体均一温度、盐度、激光拉曼和氢氧同位素测试以研究其成矿流体特征与来源。结果显示主成矿期闪锌矿及团块状石英中流体包裹体均一温度范围为213~260℃,盐度为3.05%~9.6%NaCleq;成矿晚期脉状石英中流体包裹体均一温度介于175~210℃之间,盐度3.53%~7.15%NaCl_(eq)。红外激光拉曼结果显示包裹体气相成分主要为H_2O及CO_2,含极少量CH_4。石英氢、氧同位素测试结果显示主成矿期δD_水值为-153.8‰~-149‰,δ~(18)O_水值为-0.77‰~2.38‰;成矿晚期δD_水值为-154‰~-141.4‰,δ~(18)O_水值为-2.27‰~-0.47‰。矿床成矿流体为岩浆水与演化大气降水的混合。额尔古纳地块内铅锌银多金属矿床成矿流体特征较为接近,主要为中低温低盐度NaCl-H_2O-CO_2±CH_4成矿流体;流体来源一致,推测为演化的大气降水与岩浆水的混合。  相似文献   

10.
山西中条山铜矿峪斑岩型铜矿床成矿流体特征   总被引:2,自引:1,他引:1  
铜矿峪铜矿床位于中条山铜多金属成矿带,是目前中国最古老的斑岩型铜矿床之一。基于详尽的野外地质调查,结合流体包裹体岩相学、显微测温、群包裹体成分和碳、氢、氧、硫同位素分析等研究,探讨铜矿峪铜矿床成矿流体来源、性质及其演化和成矿物质来源。铜矿峪铜矿床的成矿阶段可划分为红钠化(石英-钠长石)阶段,钾长石-石英阶段,石英-硫化物阶段,石英-碳酸盐阶段(石英-方解石-硫化物阶段和石英-铁白云石-硫化物阶段)和碳酸盐阶段。流体包裹体类型主要有富液相气液两相包裹体(Ⅰ型)、含子晶包裹体(Ⅱ型)和CO2包裹体(Ⅲ型),还有少量的富气相包裹体(Ⅳ型)和液相包裹体(Ⅴ型),成矿流体系统早期为中高温、高氧逸度、富CO2的岩浆热液,中阶段经过流体沸腾、温度降低、氧逸度降低、CO2逸失等过程演化为还原性流体,使得大量金属硫化物沉淀,最后由于大气降水的不断加入和降温等过程,形成晚期的低温、中低氧逸度、低盐度、贫CO2的大气降水热液。氢、氧同位素组成(δ18OH2O值变化范围为6.5‰~-1.10‰,δD值变化范围为-99‰~-58‰)显示,从早阶段到晚阶段,成矿流体从以原生岩浆水为主,到晚期大气降水为主。9件硫化物样品δ34S值变化于1.1‰~4.8‰,平均值为2.44‰。表明成矿物质具有深源的特征。  相似文献   

11.
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.  相似文献   

12.
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提  相似文献   

13.
本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。  相似文献   

14.
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.  相似文献   

15.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.  相似文献   

16.
本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。  相似文献   

17.
岩石密度和超高压岩石折返速率   总被引:1,自引:3,他引:1  
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。  相似文献   

18.
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes.  相似文献   

19.
The Kuskokwim River at Bethel, Alaska, drains a major mercury-antimony metallogenic province in its upper reaches and tributaries. Bethel (population 4000) is situated on the Kuskokwim floodplain and also draws its water supply from wells located in river-deposited sediment. A boring through overbank and floodplain sediment has provided material to establish a baseline datum for sediment-hosted heavy metals. Mercury (total), arsenic, antimony, and selenium contents were determined; aluminum was also determined and used as normalizing factor. The contents of the heavy metals were relatively constant with depth and do not reflect any potential enrichment from upstream contaminant sources.  相似文献   

20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号