共查询到20条相似文献，搜索用时 142 毫秒
1.
2.
3.
本文运用地洼成矿理论和构造地球化学的方法,研究了区内 F_1成矿断裂等的构造特征和元素的变化规律以及铀等成矿元素的不断累增富集的成矿作用过程.区内钠矿床的形成大体上经历了铀的预富成岩(形成铀源地质体)→断裂动力改造热液(热水)成矿→表生淋积等三个主要发展阶段,形成了一个具有层控特征的多因复成铀矿床,从而为本区指明了找矿方向. 相似文献
4.
5.
南秦岭柞水—山阳矿集区地质构造和岩浆活动强烈,矿床(点)成群成带分布,成矿条件良好。在长期找矿实践、成矿地质背景分析和典型矿床解剖的基础上,综合研究认为,区内金矿主要受EW向断裂或EW向韧-脆性剪切带与NE向张扭性叠加构造控制,寒武系水沟口组、泥盆系星红铺组与大枫沟组是金的赋矿地层。金矿体呈近EW向大致等间距展布,单个矿体在延伸方向呈透镜状、哑铃状、囊状等,具尖灭再现特征,构造叠加部位矿体厚大、品位较高。区内金矿床类型多为中-低温热液型、远成低温热液型,成矿时代为印支—燕山期。夏家店等已知金矿床深部及外围、区域断裂旁侧次级近EW向与NNE向断裂交汇部位、构造转折端、构造虚脱部位等是寻找金矿的有利靶区。铜矿分布于山阳—凤镇大断裂两侧,成矿类型以斑岩型-矽卡岩型为主,构造热液改造型、隐爆角砾岩型次之。斑岩型-矽卡岩型铜(钼)矿受燕山期构造-岩浆活动控制,赋存于燕山期斑岩体与围岩接触带内;矿体产状多受岩体与围岩接触面控制,呈似层状、透镜状产出。燕山期中酸性小岩体及其与围岩的接触部位、东西向三级断裂带附近是寻找铜(钼)矿的首选靶区。本次研究建立了柞水—山阳矿集区金铜矿床区域成矿模式,总结了找矿标志,通过成矿规律、成矿作用及物探、化探、遥感异常特征系统分析,认为区内找矿潜力巨大,并提出了3片金铜(钼)成矿远景区,指出下一步的找矿方向。 相似文献
6.
7.
通过对小秦岭金矿田中陈耳金矿床矿体宏观特征、矿石物质组成和结构构造特征、围岩蚀变、矿床地球化学特征分析,结合前人成岩、成矿年代学研究成果,显示本区主要存在2期成矿及叠加成矿作用:早期印支期形成蚀变糜棱岩型金矿,成矿作用与韧性剪切作用有关;晚期燕山期形成石英脉型金矿,成矿作用与岩浆热液作用有关。2期成矿作用所形成的矿石类型、矿石结构构造、控矿构造的方向性质、围岩蚀变、流体包裹体特征均有较大差异,在空间上具有一定程度的叠加但不完全重叠,叠加成矿作用使矿体进一步富集。指出本区金矿具有叠加改造成矿作用的特征,在东西、南北向构造交汇部位是找金矿的有利靶区。 相似文献
8.
9.
10.
黔西南地区是中国卡林型金矿的集中分布区,金矿成矿地质条件优越,找矿潜力巨大。但区内浅表金矿资源已基本找寻殆尽,找矿工作全面进入“攻深找盲”阶段。隐伏金矿由于矿体埋深较大,地表的矿化信息必然非常微弱甚至没有信息显示,深部成矿信息获取困难。如何识别并获取与深部成矿作用有关的地球化学信息,成为制约找矿突破的关键因素。黔西南卡林型金矿的形成及就位主要受背斜及断裂构造的控制,元素地球化学的分布、分异和成矿同样受到构造应力的影响,深部成矿信息通过断裂、裂隙与浅部及地表相联系,浅部构造岩石中的地球化学异常能在一定程度上反映深部的矿致异常。因此,以构造地球化学理论为基础,分析黔西南地区成矿地质条件和相应元素组合的迁移和富集规律,对卡林型金矿隐伏矿找矿地球化学弱信息提取的关键环节进行深入剖析,总结构造地球化学弱信息提取方法指标参数,有效提取深部成矿元素沿构造裂隙向上渗滤扩散形成的弱异常,对深部隐伏矿进行初步定位预测。弱信息识别及提取的相关研究成果对丰富黔西南地区卡林型金矿的成矿理论具有一定的学术价值,同时使用该方法在黔西南金矿隐伏矿找矿上能有效圈定并优选找矿靶区,对落实新一轮找矿突破战略行动任务具有积极... 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献