共查询到20条相似文献，搜索用时 62 毫秒
1.
滇西粱河勐养花岗岩的锆石U-Pb年龄、地球化学特征及其地质意义 总被引：3，自引：0，他引：3
勐养侵入岩体位于滇西腾冲地块梁河县南勐养镇一带,主要由黑云母二长花岗岩和花岗闪长岩组成,其中发育闪长质包体。闪长岩包体与寄主岩石黑云母二长花岗岩和花岗闪长岩之间呈渐变过渡关系。锆石U-Pb LA-ICP-MS定年表明,黑云母二长花岗岩形成年龄为127.7Ma±0.7Ma,花岗闪长岩形成年龄为115.2Ma±1.1Ma。闪长岩包体形成年龄为122.6Ma±0.8 Ma。表明该花岗岩体的形成时代属于早白垩世。地球化学特征研究表明,闪长岩包体为准铝质、钙碱性系列,具有低SiO2、高MgO、高K20和Mg#的特征。Sm/Nd为0.18～0.20,ΣLREE/ΣHREE=2.91～4.64,Eu存在弱到中等程度的负异常。相对富集U,Th,Rb,Ba等大离子亲石元素(LILE),亏损Tb,Nb,Zr,Hf等高场强元素(HFSE);反映勐养闪长岩包体岩浆成分主要为幔源的特点。根据地球化学特征和微量元素构造判别图解判别结果表明,勐养早白垩世侵入岩形成于碰撞后岩浆弧环境。闪长岩包体的原生岩浆应是地幔橄榄岩部分熔融的产物。黑云二长花岗岩浆可能来源于本区中晚元古代高黎贡山群为代表的地壳物质的部分熔融。花岗闪长岩为幔源岩浆与高黎贡山群古老地壳部分熔融的岩浆混合的产物。腾冲地块早白垩世侵入岩与班公湖—怒江—泸水—瑞丽洋盆的闭合、洋壳向南西俯冲及板块间的碰撞造山作用密切相关。 相似文献
2.
藏东波密-察隅地区晚侏罗世花岗岩的成因及构造意义 总被引：1，自引：1，他引：0
西藏东部的波密-察隅地区是拉萨地体的南东向自然延伸,其中生代以来的演化一直被认为是处于北部的班公湖-怒江洋和南部的雅鲁藏布洋两个动力学系统中。相应地,该区广泛分布的晚中生代-新生代岩浆岩也被认为与两个大洋的发展演化及随后拉萨-羌塘、拉萨-印度的碰撞和后碰撞作用直接相关。本研究在波密-察隅地区中北部的伯舒拉岭岩浆带中发现了晚侏罗世的花岗岩,锆石LA-ICP-MSU-Pb测年表明其形成时代为151～153Ma,地球化学显示较强的δEu负异常,锆石εHf(t)值基本在误差范围内波动,平均值为-7.75和-7.77,表明这期花岗岩为古老地壳重熔的产物,与传统认为的该时期岩浆活动对应怒江洋的俯冲岛弧背景相矛盾。结合该区发现的早侏罗世壳源花岗岩及区域沉积特征,本文认为波密-察隅地区侏罗世的壳源花岗岩应该是拉萨地体内新发现的印支期或早中生代造山事件后地壳增厚或伸展阶段岩浆活动的反映或继续,而和传统认为的怒江洋俯冲没有关系,拉萨地体东部的波密-察隅地区在演化方面可能有其特殊性。有关藏东波密-察隅地区中生代构造演化的研究还需大量地质工作以及多学科的研究去证实。 相似文献
3.
勐养侵入岩体主要由黑云母二长花岗岩(128 Ma)、花岗闪长岩(113 Ma)和辉长质(123 Ma)、闪长质包体(120Ma)组成。暗色包体主要分布在花岗闪长岩中,包体岩性主要为辉长岩包体和闪长岩包体。包体具有岩浆结构,部分包体具有塑性流变特征,有些包体具有淬冷边和反向脉,包体中可见针状磷灰石,表现出岩浆混合的岩相学特征。岩石地球化学特征研究表明,寄主岩石与暗色包体同为准铝质-过铝质、钙碱性-高钾钙碱性系列岩石。寄主岩石与暗色包体的的稀土配分曲线模式和微量元素原始地幔标准化蛛网图形态基本一致,为岩浆混合作用的结果。所有样品均富集大离子亲石元素(如Rb、Th、U和Nd)、亏损高场强元素(如Nb、Ta、Ce和Zr)。勐养早白垩世侵入岩形成于岩浆弧环境。暗色包体具有低的Si O2含量(Si O2为48.02%和59.8%)和高的Mg#值(Mg#=48.1~68.5),表明暗色包体的原生岩浆应是板块俯冲带流体交代地幔橄榄岩的部分熔融的产物,并受后期岩浆混合作用的改造。暗色包体锆石的εHf(t)为3.6~6.2,Nb/Ta值为12.1~15.4,显示岩浆源区具有亏损地幔特征。黑云二长花岗岩的Mg#=33.5,Nb/Ta值为10.9,表明岩浆主要来源于古老的地壳物质的部分熔融。花岗闪长岩锆石的Mg#=44,Nb/Ta值为12.5,岩浆主要来源于地幔和地壳,为黑云二长花岗岩与幔源岩浆混合作用的产物。腾冲地块早白垩世勐养侵入岩体及其暗色包体的的成因,是左贡—保山板块洋壳向南西俯冲在波密—腾冲地块之下,使区域地壳不断加厚并导致区域重力均衡隆升,深部地壳物质在加热后抬升减压过程中发生部分熔融,形成大量的花岗岩浆。由于俯冲洋壳板块在俯冲、碰撞过程中诱导的幔源岩浆与重熔物质发生岩浆混合作用,形成花岗闪长岩和暗色包体。 相似文献
4.
勐养花岗闪长岩体位于滇西腾冲地块梁河县南勐养镇一带。用LA-ICP-MS技术测得花岗闪长岩锆石U-Pb年龄为115.2±1.0Ma,该年龄被解释为花岗闪长岩的形成年龄,表明该区花岗闪长岩体的形成时代为早白垩世。岩石地球化学特征表明,花岗闪长岩中SiO_2含量为62.39%~67.97%,Na_2O+K_2O为6.26%~7.80%,K_2O为1.98%~4.11%,具有贫钾(K_2O/Na_2O值为0.45~1.11)、低P2O5(0.09%~0.38%)的特征;MgO为1.78%~1.98%,Mg~#为34.90~48.40,属于准铝质-弱过铝质钙碱性系列。微量元素具有相对富集大离子亲石元素(U、Th、Rb、Ba)、亏损高场强元素(Tb、Nb、Zr、Hf)的特点。该花岗闪长岩具有I型花岗岩的特征,同时兼有S型花岗岩之特点,具有明显的岩浆混合作用特征。岩石具有岛弧或活动陆缘岩系的微量元素分布特征。地球化学特征和微量元素构造判别图解揭示,勐养早白垩世花岗闪长岩形成于碰撞后岩浆弧环境。花岗闪长岩为幔源岩浆与高黎贡山群古老地壳部分熔融的岩浆混合的产物。该区早白垩世花岗闪长岩是腾冲地块早白垩世侵入岩与班公湖-怒江-泸水-瑞丽洋盆的闭合、洋壳向南西俯冲及板块间的碰撞造山作用的产物。 相似文献
5.
西藏班戈地区侵入岩年代学和地球化学: 对班公湖-怒江洋盆演化时限的制约 总被引：9，自引：5，他引：4
详细的野外地质调查、室内锆石U-Pb年代学和岩石地球化学研究显示,班戈地区侵入岩可以分为4期:早白垩世早期石英闪长岩和英云闪长岩(138Ma±),早白垩世中期花岗闪长岩(132~128Ma),早白垩世中晚期二云二长花岗岩(130~114Ma),晚白垩世二长花岗岩(80Ma±),从北到南各期次侵入岩具有成岩年龄逐渐变新,形成环境由岛弧环境→同碰撞造山环境→后碰撞环境演变。这一成果为确定班公湖-怒江洋盆的俯冲极性及演化时限提供了新的资料。班戈地区班公湖-怒江洋盆在中侏罗世之前已开始向南俯冲消减,这种俯冲消减活动一直持续至早白垩世中期最终闭合(130~125Ma),拉萨地体与羌塘地体开始发生碰撞作用,这种碰撞作用大约持续了20~30Myr,在晚白垩世早期进入后碰撞阶段(100~80Ma)。 相似文献
6.
班公湖-怒江缝合带及其两侧广泛分布早白垩世岩浆岩,它们是班公湖-怒江洋俯冲消减及拉萨地块与南羌塘地块碰撞过程的直接响应,为研究特提斯大洋演化、青藏高原早期陆块聚合提供了重要素材。本文报道了班公湖-怒江缝合带中段那曲地区黑云母二长花岗岩的锆石U-Pb定年、岩石地球化学和锆石Hf同位素分析结果。锆石LA-ICP-MS U-Pb定年结果表明,黑云母二长花岗岩形成于114～113 Ma(早白垩世晚期)。地球化学分析表明,岩石显示出高钾钙碱性—钾玄岩系列特征,同时具有高的Ga/Al×10000比值(介于2.02～3.15之间,平均为2.61)和Zr+Nb+Ce+Y含量(平均为524.87×10-6)。此外,锆饱和温度和锆石Ti温度计共同指示岩浆形成于高温的环境(>800℃),这些特征与典型的A型花岗岩相一致。黑云母二长花岗岩中锆石具有低的εHf(t)值(10.1～6.4),对应的Hf同位素二阶段模式年龄(tDM2)为1852～1547 Ma,指示其岩浆可能源自安多微陆块中下地壳古老结晶基底的部分熔融。结合区域研究成果,认为那... 相似文献
7.
班公湖-怒江缝合带及其两侧广泛分布白垩纪岩浆岩,这些岩浆活动记录了班公湖-怒江特提斯洋俯冲至闭合以及拉萨-羌塘板块碰撞过程。为了约束该缝合带在早-晚白垩世的演化过程,本文对缝合带中段尼玛地区花岗岩进行岩相学、地球化学、锆石年代学和Hf同位素研究。尼玛北部虾别错花岗岩侵入到中生代地层中,发育石英闪长质包体。锆石U-Pb定年结果表明寄主花岗岩和包体形成于早白垩世(122Ma和121Ma)。这些锆石均具有正的εHf(t)值,分别为+2.4~+7.0和+3.0~+5.1。寄主花岗岩具有高硅和高钾钙碱性特征,属于准铝质-弱过铝质系列。包体相对低硅,属于中钾钙碱性准铝质系列。寄主花岗岩和包体具有相似的微量元素分布,如均亏损Nb、Ta和Ti,富集Th、U和Pb。综合分析,虾别错寄主花岗岩和包体是壳幔熔体混合作用的产物。尼玛南部张乃错花岗岩侵入到古生代地层里。锆石U-Pb年龄为97Ma,形成于晚白垩世。锆石εHf(t)值在+2.2~+6.0之间。张乃错花岗岩具有高硅特征,属于高钾钙碱性弱过铝质系列。岩体显著亏损Ba、Sr、Ti和Eu,富集Rb、Th、U和Pb等元素。该花岗岩来源于新生地壳部分熔融,并在后期经历结晶分异。结合区域地质概况,虾别错早白垩世花岗岩(和包体)形成于班公湖-怒江特提斯洋闭合过程,而张乃错晚白垩世花岗岩形成于洋盆闭合之后拉萨-羌塘板块碰撞背景。尼玛地区早-晚白垩世岩浆活动记录了班公湖-怒江缝合带从洋盆闭合到拉萨-羌塘板块挤压碰撞的演变过程。 相似文献
8.
贡山地区的基础地质取得如下主要进展:①贡山地区的上古生界可划分为7个岩组,分属腾冲分区、保山分区施甸小区、保山分区澜沧小区;②独龙江花岗岩可归并为两个超单元,分属壳幔混源花岗岩和壳源花岗岩,分别形成火山弧和同碰撞环境,岩浆活动时期为晚侏罗世—晚白垩世,是班公湖-东巧-怒江结合带俯冲消减和碰撞造山的物质记录;③贡山地区发现一种与韧性剪切带密切相关,与原岩建造类型、地层层位无明显关系,具多相变质特征,构造背景为碰撞造山的区域动力热流变质作用;④位于高黎贡山主峰的韧性剪切带规模较大,明显地控制了该区上古生界和中生代花岗岩的空间分布,应为一条重要的构造分区断裂,可与区域上的班公湖-东巧-怒江结合带相连接。 相似文献
9.
通过1∶5万建瓯市等4幅区域地质调查,在古田旧镇—建瓯筹岭一带晚侏罗世花岗岩体中分解出早白垩世花岗岩体,运用LA-ICP-MS锆石U-Pb测年,获得岩体锆石U-Pb年龄为(130.0±1.0)Ma和(131.5±1.3)Ma,岩浆来源于大陆地壳,为形成于同碰撞环境的S型花岗岩,是太平洋板块以北西向向欧亚大陆板块俯冲的产物。 相似文献
10.
滇西芒市地区石板村黑云母二长花岗岩的年代学、地球化学特征及地质意义 总被引：2，自引：0，他引：2
滇西芒市地区石板村黑云母二长花岗岩分布于芒市粱河县南部勐养村—芒市石板村一带,主要由黑云母二长花岗岩组成。石板村黑云母二长花岗岩大部分是作者通过1∶5万区域地质填图,从原高黎贡山群中解体出来的。为了限定该地区中生代岩浆事件的准确时间,本文对该黑云母二长花岗岩进行了LA-ICP-MS锆石U-Pb定年。测定结果显示,石板村黑云母二长花岗岩的锆石U-Pb年龄加权平均值为125.60±1.0Ma。表明该花岗岩体的形成时代属于早白垩世。岩石地球化学研究表明,该区早白垩世黑云母二长花岗岩具有高Si02(70.70%~76.14%),高碱(K20+Na20=7.35%~9.00%),中—高钾(K20/Na20=1.12~2.37)的特征。铝饱和指数(A/CNK)为0.67~1.17,岩石属钾玄岩—高钾钙碱性过铝—强过铝S型花岗岩。岩石总体上富集大离子亲石元素Rb、Th、U、Nd、Sm和Pb等,明显亏损高场强元素Nb、Ce、Sr、Eu、Zr、Hf等。稀土元素总量(ΣREE)为80.55×10-6~362.85×10-6,平均为171.97×10-6,稀土元素配分曲线呈右倾型,LaN/YbN介于5.11~18.80之间,δEu=0.28~1.08,显示弱到中等程度的负铕异常,具有较明显的轻稀土富集,重稀土亏损的特征。根据地球化学特征和微量元素构造判别图解判别结果表明,该花岗岩是以含粘土的变质杂砂岩部分熔融形成的,岩浆可能来源于本区中—新元古代高黎贡山群为代表的地壳物质的部分熔融。是一种典型的壳源成因类型,具后碰撞花岗岩特征,形成于板块间从挤压体制向拉张体制转变的后碰撞构造环境。冈底斯—滕冲构造带早白垩世构造岩浆事件与羌塘—保山板块与冈底斯—腾冲板块之间俯冲、碰撞、成弧造山作用密切相关。早白垩世花岗岩体的发现及其形成时代的厘定,为进一步探讨腾冲地块构造演化提供了新证据。 相似文献
11.
S. Viswanathan K. Surya Prakash Rao B. Mahabaleswar 《Journal of the Geological Society of India》2013,82(6):621-627
Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours. 相似文献
12.
E. M. Prasolov S. A. Sergeev B. V. Belyatsky E. S. Bogomolov K. A. Gruzdov I. N. Kapitonov R. Sh. Krymsky V. O. Khalenev 《Geochemistry International》2018,56(1):46-64
This paper reports the first results of a study of 11 isotope systems (3He/4He, 40Ar/36Ar, 34S/32S, 65Cu/63Cu, 62Ni/60Ni, 87Sr/86Sr, 143Nd/144Nd, 206–208Pb/204Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others. 相似文献
13.
14.
奥地利安东帕有限公司 《岩矿测试》2009,28(3):306-306
最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提 相似文献
15.
16.
Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance. 相似文献
17.
Alexander E. C. Broberg J. S. Kehren A. R. Graziani M. M. Turri W. L. 《Environmental Geology》1993,22(4):353-361
Bellechester, Minnesota, is a small community of approximately 155 residents located on the county line between Goodhue and Wabasha counties in southeast Minnesota's karst region. Bellechester is served by a 21-year-old wastewater treatment facility (WWTF) consisting of three waste-stabilization ponds. On 28 April 1992 six sinkholes were discovered to have drained cell 2 of the WWTF resulting in the loss of approximately 8.7×106 1 of partially treated effluent and about 600 m3 of soil into previously undetected subsurface voids of unknown dimensions. In the week following the collapse, approximately 200 water wells located within a 5-km radius of the WWTF were sampled in an after-the-fact, emergency sampling program. Twelve samples with elevated fecal coliform levels, 18 samples with nitrate-nitrogen greater than the 10 mg/1 standard, and no samples with elevated chlorides were found. However, the elevated levels could not be unambiguously attributed to the WWTF collapse. This is the third WWTF to fail by sinkhole collapse in southeast Minnesota since 1974. All three collapsed lagoons have been located in similar geomorphic and stratigraphic settings. However, at least two lagoons have collapsed in the adjacent area in northeast Iowa, and these lagoons are located at different stratigraphic positions. Twenty-two WWTFs constructed in southeast Minnesota's karst region in the last 25 years have been identified as subject to potential sinkhole collapse. An unknown but significant number of manure storage lagoons, flood control structures, etc., have also been constructed in the karst region and are at risk. Public agencies are beginning to develop plans to deal with the risk associated with existing and future waste lagoons in this environment. The critical hydrogeologic parameters that can be used to prioritize the risk of collapse at existing facilities include: (1) the lithology of the first bedrock beneath each lagoon, (2) the thickness of surficial materials between the lagoon and the bedrock surface, (3) the presence and construction of liners (seepage rate), and (4) the proximity to existing sinkholes. 相似文献
18.
岩石密度和超高压岩石折返速率 总被引：1，自引：3，他引：1
在常温常压条件下对中国大陆科学钻CCSD主孔100-3000米岩心样品进行了密度测量,建立了密度连续剖面,并界定了不同超高压岩石的密度值。通过对比高温高压物性实验资料,岩石密度随着退变程度增强而降低,榴辉岩密度变化序列为3.52g/cm3→3.49g/cm3→3.07g/cm3→2.93g/cm3。超高压长英质岩石密度变化序列为3.00g/cm→2.80g/cm3→2.65g/cm3。上述实验资料是讨论不同折返阶段岩石所受浮力的基础,为研究折返速率大小提供了基本参数。本文通过折返板块运动平衡时,上浮力与粘滞力平衡这一关系式,定量研究了大陆俯冲板块的折返速率,认为密度差产生上浮力从而引起折返,温度对板块折返速率的影响最为显著;密度差大小、折返角度、折返板块大小对折返速率也有直接的影响。定量模拟分析表明,在温度高于850℃时,板块的折返速率可以超过100mm/a;当温度降至700℃时,折返速率则低于1.5mm/a。作者认为在折返早期,温度较高,板块快速折返至60-70km榴辉岩相深度;随着传导散热,温度降低,板块以较慢的速率折返至中下地壳。折返速率的估算表明,浮力是板块折返第一阶段(从>100km深部折返至<40km的中下地壳)的主要驱动力。 相似文献
19.
20.
滇东南锡、银、铅、锌多金属矿床主要分布在个旧、白牛厂、都龙3个矿区,而滇东南较大的3个花岗岩体又分别出露在3个矿区或附近.花岗岩体均形成于燕山晚期,岩石化学、矿物成分相似,富含锡、银、铅、锌、钨、铜等成矿元素.矿床主金属元素组合与岩体之间的距离由远而近出现由锡、钨、(铍、铌、钽)→锡、钨、(铁)、铜、铟→锡、铅、锌、银、铟、(锑)有规律的变化.花岗岩浆是成矿物质来源和成矿热源.岩浆侵入初期使上覆地层隆起产生背斜(凹陷部位成向斜);同时使地层产生一系列裂隙、压性断层或层间断裂;岩浆侵入晚期,这些断层再次活动,表现为张性,岩浆产生的含矿热液沿由其活动所造成的断裂迁移、充填、交代、沉淀而形成矿床. 相似文献