共查询到18条相似文献，搜索用时 219 毫秒
1.
结合机载LiDAR数据,提出了一种改进的GLAS光斑点冠层高度地形校正模型,以校正后的GLAS光斑点作为输入样本,结合MODIS遥感影像,利用支持向量回归（SVR）的方法对研究区森林冠层高度进行分生态区估测,并利用野外调查数据和机载LiDAR冠层高度结果对估测结果进行验证。结果显示:研究区的坡度等级直接影响GLAS光斑点森林冠层高度估测精度,改进的地形校正模型可以较好的减小坡度对GLAS光斑点森林冠层高度估测的影响,模型精度RMSE稳定在3.25~3.48 m;不同生态分区的SVR模型估测精度较为稳定,其RMSE=6.41~7.56 m;与算数平均高相比,样地的Lorey's高与制图结果拟合最好,不同生态分区平均估测精度为80.3%。机载LiDAR冠层高度结果的验证平均精度为79.5%,和Lorey's高验证结果呈现较好的一致性。 相似文献
2.
在深入分析现有机载激光雷达（light detection and ranging，LiDAR）强度修正算法在滩涂地区适用性的基础上，针对单纯利用激光入射角对滩涂LiDAR强度信息进行高光修正有可能造成强度修正中心位置偏移的问题，利用视点端的飞机姿态角对目标端的激光入射角进行精密校正，结合校正后的入射角和经典的Phong光照模型，提出了一种顾及飞机姿态角的滩涂LiDAR强度修正模型，通过对经典强度修正后的数据进行进一步的高光修正，定量补偿了强度修正中心的位置偏移量，实现了强度信息中高光现象的有效消除。在MATLAB平台下对方法的正确性和有效性进行了实验验证，结果表明，经由该方法修正后的强度信息具有更好的同质性，可显著提高地物分类的准确性。 相似文献
3.
亚热带森林参数的机载激光雷达估测 总被引：5，自引：2，他引：3
通过应用机载激光雷达数据,在分析云南省中部的78块样地的基础上提出2个预测森林不同生物特性的统计模型(加权平均高度的预测模型和生物量的预测模型),并讨论了预测结果及其精确性。从激光雷达数据中提取了2组变量(树冠高度变量组和植被密度变量组)作为自变量,采用逐步回归方法进行自变量选择。结果表明,激光雷达数据与森林的平均树高和地上各部分生物量有很强的相关性。对于3种不同森林类型(针叶林,阔叶林和混交林),平均树高估测均能达到比较高的精度;生物量的估测结果是针叶林优于阔叶林,混交林的生物量与激光雷达数据则没有明显相关性。最后,对回归分析的结果和影响预测精度的因素进行讨论,认为预测结果的精度可能与森林类型、激光雷达采样时间和采样密度以及坐标误差等因素有关。 相似文献
4.
结合机载、星载激光雷达对GLAS(地球科学激光测高系统)光斑范围内的森林地上生物量进行估测,并利用MODIS植被产品以及MERIS土地覆盖产品进行了云南省森林地上生物量的连续制图。机载LiDAR扫描的260个训练样本用于构建星载GLAS的森林地上生物量估测模型,模型的决定系数(R2)为0.52,均方根误差(RMSE)为31Mg/ha。研究结果显示,云南省总森林地上生物量为12.72亿t,平均森林地上生物量为94Mg/ha。估测的森林地上生物量空间分布情况与实际情况相符,森林地上生物量总量与基于森林资源清查数据的估测结果相符,表明了利用机载LiDAR与星载ICESatGLAS结合进行大区域森林地上生物量估测的可靠性。 相似文献
5.
山地叶面积指数反演理论、方法与研究进展 总被引：2，自引：0，他引：2
叶面积指数LAI（Leaf Area Index）是表征叶片疏密程度和冠层结构特征的重要植被参数，在气候变化、作物生长模型以及碳、水循环研究中发挥着重要作用。遥感是获取区域及全球尺度LAI的一个重要手段，当前LAI产品主要基于遥感数据反演得到，但是多数LAI产品算法并未考虑地形特征的影响，导致山地LAI遥感反演精度不确定性大。提高山地LAI遥感反演精度亟需考虑地形因子对冠层反射率的影响，其中山地冠层反射率模型和遥感数据地形校正是提升山地LAI遥感反演精度的关键。本文围绕山地LAI遥感反演理论与方法，综合分析了国内外山地冠层反射率模型和地形校正模型的研究进展，总结了目前山地LAI遥感反演存在的问题，并讨论了未来研究的发展趋势。 相似文献
6.
目前LiDAR技术已经成为DTM的主要生产方法。地面误差对LiDAR生成DTM的精度影响比较明显,特别是由于亚热带森林植被覆盖区LiDAR激光点云少,生成的DTM更复杂,需要分析地面误差对LiDAR生成林下DTM的精度影响。本文以华南农业大学增城教学科研基地为研究对象,从森林郁闭度和坡度两个方面探讨了地面误差对机载LiDAR数据生成林下DTM精度的影响。研究结果发现高程误差会随郁闭度的增大而增大;而随坡度变化趋势不明显,但是坡度为15°时成为误差的分水岭,其前后误差差异比较明显。总体而言,郁闭度的影响更为明显。 相似文献
7.
《国土资源遥感》2017,(4)
叶面积指数(leaf area index,LAI)作为植被冠层的重要参数,对作物长势监测及产量估算具有重要意义。本研究以黑河流域张掖绿洲试验区为例,基于机载航空高光谱遥感影像(compact airborne spectrographic imager,CASI)数据,利用物理模型与统计模型对研究区的LAI进行估测反演。首先,利用归一化植被指数(normalized difference vegetation index,NDVI)与相应实测LAI数据建立最佳线性回归模型;然后,基于混合像元分解模型和多次散射植被冠层模型构建物理模型;最后,以线性回归模型为参比修正多次散射植被冠层模型,构建半经验LAI反演模型,并比较上述模型拟合效果。研究结果表明,半经验模型为绿洲区LAI反演最优模型,模型估算精度R2达到0.89,精度提高较显著。研究对提升作物LAI的估算精度有一定意义,并将进一步推动精细农业定量遥感理论的研究与应用。 相似文献
8.
《国土资源遥感》2020,(1)
森林中可燃物的分布状况是影响林火产生、扩散的重要因素之一,本研究的目的是结合森林资源调查数据、激光雷达(light laser detection and ranging,LiDAR)点云数据、地形和气象因子共同驱动的可燃物特征分类系统(fuel characteristic classification system,FCCS)模型来实现森林火险等级预测。以云南省普洱市为研究区,首先,利用机载LiDAR数据生产的树冠高度模型进行面向对象分割,与森林资源二类清查数据叠加分析确定分割单元,并根据可燃物的可燃性将研究区内的可燃物分为针叶林、阔叶林、竹林和灌木林等4种类型,在此基础上采用分层随机抽样形成验证数据集;然后,提取LiDAR变量因子,采用多元逐步回归法反演不同可燃物的森林参数;最后,将森林参数连同气象和地形因子作为FCCS模型的输入,完成各个分割单元的火情等级评价,实现该地区潜在火行为、树冠火、有效可燃物和综合火灾险情的制图。研究结果表明,研究区有效可燃物火险等级比较低,符合研究区的实际情况;森林垂直结构与森林火险等级关系密切,森林参数的准确估测对整个可燃物的制图具有非常重要的作用。 相似文献
9.
《测绘科学》2020,(6)
针对全波激光雷达(LiDAR)数据在坡地森林高度估测中的应用,该文提出利用地形参数估测树高的方法。首先以ICESat-GLAS大光斑全波形数据为数据源,利用指数加权和形式建立全波LiDAR波形的理想数据模型,并采用最小二乘法求解该理想模型;其次,利用阈值法确定有效波形的始末位置,进而得到有效波形的波形长度,并据此估计地形起伏参数;结合光斑直径、波形长度、地形起伏参数以及地表展宽程度,建立树高估测模型。以黑龙江省大兴安岭为实验研究区,估测树高与实际测量值之间的相关系数为0.926 2。实验结果表明:针对地形坡度等外在因素影响,利用波形本身特征参数,能有效量化地形因素的影响,并能有效解决地形复杂地区树木高度估测问题。 相似文献
10.
机器学习算法在森林地上生物量估算中的应用 总被引：1，自引：0，他引：1
森林地上生物量是森林生产力的重要评价指标,对其进行高效监测对维持全球碳平衡和保护生态系统具有重要意义。本文首先基于冠层高度模型数据,通过分水岭分割算法得到单木冠幅边界;然后在单木冠幅范围内提取23个LiDAR变量,结合佩诺布斯科特试验森林的87组实测数据,利用随机森林和支持向量机建立森林地上生物量估算模型;最后对样地模型估算的结果进行了比较,讨论了预测结果及其精度。结果表明:本文选用的随机森林模型和支持向量机模型在估算森林地上生物量的应用中获得了较高的精度;并且,随机森林模型在基于机载雷达数据估测森林地上生物量中的估算精度更高,模型泛化能力更强,制图精度也更好,具有更好的适用性。 相似文献
11.
机载激光雷达平均树高提取研究 总被引：16，自引：3，他引：13
为了研究机载激光雷达(LiDAR)树高提取技术,以山东省泰安市徂徕山林场为实验区,于2005年5月进行了机载LiDAR数据获取和外业测量.通过对LiDAR点云数据的分类处理,分别得到了试验区的地面点云子集、植被点云子集和高程归一化的植被点云子集.基于高程归一化的植被点云子集计算了上四分位数处的高度,与实地测量的数据进行了比较,并结合中国森林调查规程进行了实用性分析.结果表明:对于较低密度的点云数据,使用分位数法可以较好地进行林分平均高的估计;机载激光雷达技术对树高估计是可行的,精度都高于87%,总体平均精度为90.59%,其中阔叶树的精度高于针叶树.该试验精度可以满足中国二类森林调查规程中平均树高因子的一般商品林和生态公益林的精度要求,对国有商品林小班的调查精度要求(5%)存在一点差距,需要在国有商品林区进一步开展验证工作.对本试验区而言,已经可以满足其作为森林公园生态公益林的调查要求. 相似文献
12.
Forest plantations are an important source of terrestrial carbon sequestration. The forest of Robinia pseudoacacia in the Yellow River Delta (YRD) is the largest artificial ecological protection forest in China. However, more than half of the forest has appeared different degrees of dieback and even death since the 1990s. Timely and accurate estimation of the forest aboveground biomass (AGB) is a basis for studying the carbon cycle of forests. Light Detecting and Ranging (LiDAR) has been proved to be one of the most powerful methods for forest biomass estimation. However, because of an irregular and overlapping shape of the broadleaved forest canopy in a growing season, it is difficult to segment individual trees and estimate the tree biomass from airborne LiDAR data. In this study, a new method was proposed to solve this problem of individual tree detection in the Robinia pseudoacacia forest based on a combination of the Unmanned Aerial Vehicle-Light Detecting and Ranging (UAV-LiDAR) with the Backpack-LiDAR. The proposed method mainly consists of following steps: (i) at a plot level, trees in the UAV-LiDAR data were detected by seed points obtained by an individual tree segmentation (ITS) method from the Backpack-LiDAR data; (ii) height and diameter at breast height (DBH) of an individual tree would be extracted from UAV and Backpack LiDAR data, respectively; (iii) the individual tree AGB would be calculated through an allometric equation and the forest AGB at the plot level was accumulated; and (iv) the plot-level forest AGB was taken as a dependent variable, and various metrics extracted from UAV-LiDAR point cloud data as independent variables to estimate forest AGB distribution in the study area by using both multiple linear regression (MLR) and random forest (RF) models. The results demonstrate that: (1) the seed points extracted from Backpack-LiDAR could significantly improve the overall accuracy of individual tree detection (F = 0.99), and thus increase the forest AGB estimation accuracy; (2) compared with MLR model, the RF model led to a higher estimation accuracy (p < 0.05); and (3) LiDAR intensity information selected by both MLR and RF models and laser penetration rate (LP) played an important role in estimating healthy forest AGB. 相似文献
13.
地基激光雷达的玉兰林冠层叶面积密度反演 总被引：1，自引：0，他引：1
叶面积密度LAD(Leaf Area Density)是表征冠层内部叶面积垂直分布的重要参数,其分布廓线的准确反演对研究植被碳氮循环、初级生产力和生物量估算等具有重要意义。本文在电子科技大学校内建立实验样区,利用地基激光雷达Leica Scan Station C10和数码相机获取玉兰林高分辨率3维激光点云数据和真彩色影像。利用监督分类将真彩色影像中枝干等非光合组织与叶片分离,再将像素分类信息映射给点云数据,从而提取叶片点云。通过点云数据体元化,并引入2维凸包算法确定垂直方向分层树冠边界,获取激光接触冠层的频率;随机选择不同高度的多个叶片,利用特征值法进行叶片平面拟合,估算出叶倾角,并结合天顶角估算叶倾角校正因子;最后基于体元的冠层分析VCP(Voxel-based Canopy Profiling)方法实现树林冠层LAD反演。结果表明体元化的叶片点云数据能准确确定树林冠层边界和统计接触频率实现LAD反演;反演的LAD变化走势与区域林木冠层叶片垂直分布相吻合,在冠层中下部随着高度的增加叶面积密度也随之增加,在4 m高度处达到最大值1 m2/m3,之后随着高度的增加叶面积密度逐渐降低。根据LAD计算得到的累积叶面积指数LAI为3.20 m2/m2,与LAI-2200实测的叶面积指数相比,相对误差为1.26%。 相似文献
14.
The accurate estimation of leaf water content (LWC) and knowledge about its spatial variation are important for forest and agricultural management since LWC provides key information for evaluating plant physiology. Hyperspectral data have been widely used to estimate LWC. However, the canopy reflectance can be affected by canopy structure, thereby introducing error to the retrieval of LWC from hyperspectral data alone. Radiative transfer models (RTM) provide a robust approach to combine LiDAR and hyperspectral data in order to address the confounding effects caused by the variation of canopy structure. In this study, the INFORM model was adjusted to retrieve LWC from airborne hyperspectral and LiDAR data. Two structural parameters (i.e. stem density and crown diameter) in the input of the INFORM model that affect canopy reflectance most were replaced by canopy cover which could be directly obtained from LiDAR data. The LiDAR-derived canopy cover was used to constrain in the inversion procedure to alleviate the ill-posed problem. The models were validated against field measurements obtained from 26 forest plots and then used to map LWC in the southern part of the Bavarian Forest National Park in Germany. The results show that with the introduction of prior information of canopy cover obtained from LiDAR data, LWC could be retrieved with a good accuracy (R2 = 0.87, RMSE = 0.0022 g/cm2, nRMSE = 0.13). The adjustment of the INFORM model facilitated the introduction of prior information over a large extent, as the estimation of canopy cover can be achieved from airborne LiDAR data. 相似文献
15.
Forest structural diversity metrics describing diversity in tree size and crown shape within forest stands can be used as indicators of biodiversity. These diversity metrics can be generated using airborne laser scanning (LiDAR) data to provide a rapid and cost effective alternative to ground-based inspection. Measures of tree height derived from LiDAR can be significantly affected by the canopy conditions at the time of data collection, in particular whether the canopy is under leaf-on or leaf-off conditions, but there have been no studies of the effects on structural diversity metrics. The aim of this research is to assess whether leaf-on/leaf-off changes in canopy conditions during LiDAR data collection affect the accuracy of calculated forest structural diversity metrics. We undertook a quantitative analysis of LiDAR ground detection and return height, and return height diversity from two airborne laser scanning surveys collected under leaf-on and leaf-off conditions to assess initial dataset differences. LiDAR data were then regressed against field-derived tree size diversity measurements using diversity metrics from each LiDAR dataset in isolation and, where appropriate, a mixture of the two. Models utilising leaf-off LiDAR diversity variables described DBH diversity, crown length diversity and crown width diversity more successfully than leaf-on (leaf-on models resulted in R² values of 0.66, 0.38 and 0.16, respectively, and leaf-off models 0.67, 0.37 and 0.23, respectively). When LiDAR datasets were combined into one model to describe tree height diversity and DBH diversity the models described 75% and 69% of the variance (R² of 0.75 for tree height diversity and 0.69 for DBH diversity). The results suggest that tree height diversity models derived from airborne LiDAR, collected (and where appropriate combined) under any seasonal conditions, can be used to differentiate between simple single and diverse multiple storey forest structure with confidence. 相似文献
16.
集成Landsat OLI和机载LiDAR条带数据的亚热带森林生物量制图 总被引：1，自引：0，他引：1
以亚热带天然次生林为研究对象,借助一个条带的少量LiDAR点云数据和覆盖整个研究区的免费Landsat OLI多光谱数据,并结合地面实测数据,探索森林生物量低成本高精度制图方法。首先,提取了OLI和LiDAR特征变量,并与地上和地下生物量进行相关分析以筛选变量;然后,借助LiDAR数据覆盖区的样地和条带LiDAR数据构建"LiDAR生物量模型";再从LiDAR反演生物量的结果中进行采样,结合OLI特征变量构建"LiDAR-OLI模型";最后,与单独使用OLI多光谱数据建立的"OLI估算模型"结果进行比较,分析精度并验证新方法的效果。结果表明,"LiDAR-OLI模型"对地上和地下生物量的模型拟合效果较好且均优于"OLI模型",且其交叉验证的精度也较高并优于"OLI模型",从而证明了新方法的可靠性及有效性。本研究为主、被动遥感技术在中小尺度上协同反演森林参数提供了实验基础,也为基于全覆盖免费OLI多光谱数据及条带LiDAR数据的低成本森林生物量制图探索了技术路线。 相似文献
17.
A time series of leaf area index (LAI) of a managed birch forest in Germany (near Dresden) has been developed based on 16-day normalized difference vegetation index (NDVI) data from the Landsat ETM+ sensor at 30 m resolution. The Landsat ETM+ LAI was retrieved using a modified physical radiative transfer (RTM) model which establishes a relationship between LAI, fractional vegetation cover (fC), and given patterns of surface reflectance, view-illumination conditions and optical properties of vegetation. In situ measurements of photosynthetically active radiation (PAR) and vegetation structure parameters using hemispherical photography (HSP) served for calibration of model parameters, while data from litter collection at the study site provided the ground-based estimates of LAI for validation of modelling results. Influence of view-illumination conditions on optical properties of canopy was simulated by a view angle geometry model incorporating the solar zenith angle and the sensor viewing angle. Effects of intra-annual and inter-annual variability of structural properties of the canopy on the light extinction coefficient were simulated by implementing variability of the leaf inclination angle (LIA), which was confirmed in the study site. The results revealed good compatibility of the produced Landsat ETM+ LAI data set with the litter-estimated LAI. The results also showed high sensitivity of the LAI retrieval algorithm to variability of structural properties of the canopy: the implementation of LIA dynamics into the LAI retrieval algorithm significantly improved the model accuracy. 相似文献
18.
Spaceborne light detection and ranging (LiDAR) enables us to obtain information about vertical forest structure directly, and it has often been used to measure forest canopy height or above-ground biomass. However, little attention has been given to comparisons of the accuracy of the different estimation methods of canopy height or to the evaluation of the error factors in canopy height estimation. In this study, we tested three methods of estimating canopy height using the Geoscience Laser Altimeter System (GLAS) onboard NASA’s Ice, Cloud, and land Elevation Satellite (ICESat), and evaluated several factors that affected accuracy. Our study areas were Tomakomai and Kushiro, two forested areas on Hokkaido in Japan. The accuracy of the canopy height estimates was verified by ground-based measurements. We also conducted a multivariate analysis using quantification theory type I (multiple-regression analysis of qualitative data) and identified the observation conditions that had a large influence on estimation accuracy. The method using the digital elevation model was the most accurate, with a root-mean-square error (RMSE) of 3.2 m. However, GLAS data with a low signal-to-noise ratio (⩽10.0) and that taken from September to October 2009 had to be excluded from the analysis because the estimation accuracy of canopy height was remarkably low. After these data were excluded, the multivariate analysis showed that surface slope had the greatest effect on estimation accuracy, and the accuracy dropped the most in steeply sloped areas. We developed a second model with two equations to estimate canopy height depending on the surface slope, which improved estimation accuracy (RMSE = 2.8 m). These results should prove useful and provide practical suggestions for estimating forest canopy height using spaceborne LiDAR. 相似文献