共查询到19条相似文献，搜索用时 140 毫秒
1.
机载多光谱LiDAR数据的地物分类方法 总被引：2，自引：1，他引：1
机载多光谱LiDAR系统能够快速地获取大范围地表面上地物光谱和几何数据,并能够保证所获取的光谱与空间几何数据在空间和时间上相对完整和一致性。支持向量机（SVM）是一种基于小样本的学习方法,它避开了从归纳到演绎的传统分类过程。因此,本文提出了基于SVM多光谱LiDAR数据的地物目标分类方法。该方法首先将多个独立波段的LiDAR数据融合为单一的、包含多个波段信息的点云数据,然后将融合后的点云内插为距离影像和多光谱影像,最后利用SVM进行多光谱LiDAR数据的地物覆盖分类。通过对加拿大Optech公司的Titan机载多光谱LiDAR数据的试验证明：相对于传统的单波段LiDAR数据,多光谱LiDAR数据可以获得较好的地物分类精度;比较试验发现SVM分类方法适用于多光谱LiDAR数据的地物分类。 相似文献
2.
针对商用激光传感器Optech LiDAR Titan系统获取的多光谱激光点云数据进行地物分类试验的探索,该文提出一种基于卷积神经网络(CNN)模型的多光谱激光LiDAR点云数据地物分类方法.新数据源多光谱激光点云具有多通道和多次散射回波的典型特性,生成感兴趣的热力图,根据热力图特征值和nDSM辅助数据进行感兴趣地物分类.采用CNN模型学习结果与面向对象影像分析OBIA分类方法相结合对分类结果进行精化,并用随机采样参考点对地物分类结果进行精度评估,解决CNN模型分类的正确性和可靠性问题.实验表明,地物分类整体精度OA达到89.8％,Kappa值0.858,该方法在多光谱激光点云地物分类方面具有稳健性、有效性和通用性. 相似文献
3.
针对机载LiDAR系统数据分类中多源特征与城区分类目标相关性不明确的问题,在面向对象的数据特征挖掘基础上,提出了一种基于随机森林的机载LiDAR系统特征选择与分类方法,利用不同地区数据实验证明:本文方法能对机载LiDAR系统数据多源特征的重要性进行正确评估,通过特征选择,在减少特征的情况下仍能够达到较高的分类精度。 相似文献
4.
面向对象的LiDAR数据多特征融合分类 总被引：1，自引：0，他引：1
针对单源遥感数据分类精度不高的问题,提出一种基于多特征融合的面向对象分类方法.该方法利用LiDAR点云数据的高程信息,并融合地物粗糙度特征,以及航空影像的地物光谱、形状和上下文信息等多种特征,再基于SVM分类器构建面向对象的分类方法,以提高城区环境下遥感数据分类的可靠性.试验表明,该方法可有效地提高城区地物的分类精度,且分类结果更符合人的视觉认知规律. 相似文献
5.
6.
张景景 《测绘与空间地理信息》2018,(4):146-150
高分辨率遥感卫星影像是获取地物精细类别的重要数据源,快速准确地获取土地利用和土地覆盖分类信息可为土地利用规划、土地管理等提供重要的数据支撑和决策依据。本文开展了高分辨率影像面向对象分类研究,首先,利用多尺度分割方法对高分辨率影像进行分割,基于分割对象,选取不同地物类别样本并计算光谱特征、纹理特征、几何特征。然后,针对特征冗余问题,利用最大相关最小冗余算法选择优先级较高特征,在此基础上结合遗传算法对特征集进行适当扩充(m GA)。在面向对象分类过程中,通过利用遗传算法对支持向量机模型进行快速参数寻优,并在此基础上对分割对象进行分类。最终地物总体精度达到85.93%,Kappa系数为0.828 2。并将分类结果与最近邻分类和随机森林分类结果进行了比较,地物分类精度提高了4.05%和6.81%。实验结果表明:基于m GA特征优化及SVM参数选择进行改进的面向对象的分类方法是有效的。 相似文献
7.
探索自动化的激光点云分类方法对于三维建模、城市土地分类、DEM制图等应用具有重要作用。考虑到现有的点云分类算法在提取依赖邻域结构的特征参数时面临邻域尺度的选择难、数据维度高、计算复杂,并且缺乏对分类特征参数的重要性评估和选择等问题,本文提出了基于随机森林的机载LiDAR点云数据降维与分类方法。在分析点云数据的高程、回波、强度等属性特征的基础上,提取归一化高度、高度统计量、表面特征、空间分布特征、回波特征及强度特征6大类特征参数,并构建多尺度特征参数,运用随机森林的特征选择算法对分类特征集进行优化,然后进行点云分类。试验结果表明,基于随机森林的特征选择方法可以有效地降低特征维度,并且使得总体分类精度达到94.3%（Kappa系数为0.922）,相比于使用全部特征分类和SVM分类方法而言,该方法的总体分类精度均有一定程度的提高;特征的重要性度量结果表明,归一化高度特征在点云分类中所起的作用最大。 相似文献
8.
基于随机森林特征优选的冬小麦分类方法 总被引：1，自引：0，他引：1
本文基于多时相Landsat 8 OLI数据,进行综合光谱、植被指数的特征提取与特征选择的方法研究。通过分析光谱与植被指数特征时序变化,提取最佳时相光谱,构建小麦提取特征;采用基于重要性与Pearson相关性的随机森林特征选择算法优选特征。结果表明:利用优选特征分类时,总体精度为89.78%,小麦分类精度为98.33%;与优选前特征的分类结果相比,精度分别提高了2.96%、2.55%;基于重要性与Pearson相关性的随机森林特征选择提高了分类精度和分类器工作效率。 相似文献
9.
高光谱影像的引导滤波多尺度特征提取 总被引：1，自引：0，他引：1
为了解决高光谱遥感影像分类中单一尺度特征无法有效表达地物类间差异和区分地物边界的不足,提高影像分类精度和改善分类目视解译效果,提出了采用引导滤波提取多尺度的空间特征的方法。首先,利用主成分分析对高光谱影像进行降维,移除噪声并突出主要特征;然后,将第1主成分作为引导影像,将包含信息量最多的若干主成分分别作为输入影像,应用依次增加的滤波半径分别进行引导滤波处理提取多个尺度的特征,获得影像不同尺度的结构信息;最后,将多尺度特征输入分类器中进行影像监督分类。采用仿真数据和帕维亚大学(Pavia University)、帕维亚城区(Pavia Centre)等3幅高光谱实验数据,提取了基于引导滤波的多尺度特征、多尺度形态特征和多尺度纹理特征,输入到支持向量机、随机森林和K近邻分类器中,进行了实验。实验结果表明:采用支持向量机分类Pavia University数据,相对于采用多尺度形态特征的分类结果,引导滤波特征的总体精度提高了6.5%;Pavia Centre和Salinas两幅影像最高分类精度均由引导滤波特征实现,分别达到98.51%和98.39%。实验证实基于引导滤波提取的多尺度特征能有效地描述地物结构,进而获得更高的分类精度和改善目视解译效果。 相似文献
10.
使用LiDAR单一数据进行点云分割工作时,基于斜率的严格分割LiDAR点云的方法不能很好的适应复杂地物
的分类工作。本文将LiDAR粗分割后的点云转换为高度图像和反射强度图像,并求取高度图像GLCM高度纹理。将4
种GLCM高度纹理、地面粗糙系数、平均高度和平均反射强度共7种纹理作为识别地面覆盖物的特征,并利用后向传播
神经网络(BP-ANN)方法对LiDAR数据进行地物识别。实验表明,这种方法能够从LiDAR独立数据源中有效的实现地
物分类,实验获得的精度大于90%。与传统的最大似然法进行对比,BP-ANN的分类精度高于最大似然法。当预设地
面类型能同时满足被光学影像和LiDAR数据识别的条件时,LiDAR高度纹理分类与光学影像分类结果的一致性达到
76.5%。 相似文献
11.
Synthetic Aperture Radar (SAR) data are of high interest for different applications in remote sensing specially land cover classification. SAR imaging is independent of solar illumination and weather conditions. It can even penetrate some of the Earth’s surface materials to return information about subsurface features. However, the response of radar is more a function of geometry and structure than a surface reflection occurs in optical images. In addition, the backscatter of objects in the microwave range depends on the frequency of the band used, and the grey values in SAR images are different from the usual assumption of the spectral reflectance of the Earth’s surface. Consequently, SAR imaging is often used as a complementary technique to traditional optical remote sensing. This study presents different ensemble systems for multisensor fusion of SAR, multispectral and LiDAR data. First, in decision ensemble system, after extraction and selection of proper features from each data, crisp SVM (Support Vector Machine) and Fuzzy KNN (K Nearest Neighbor) are utilized on each feature space. Finally Bayesian Theory is applied to fuse SVMs when Decision Template (DT) and Dempster Shafer (DS) are applied as fuzzy decision fusion methods on KNNs. Second, in feature ensemble system, features from all data are applied on a cube. Then classifications were performed by SVM and FKNN as crisp and fuzzy decision making system respectively. A co-registered TerrraSAR-X, WorldView-2 and LiDAR data set form San Francisco of USA was available to examine the effectiveness of the proposed method. The results show that combinations of SAR data with different sensor improves classification results for most of the classes. 相似文献
12.
Although wetlands play a key role in controlling flooding and nonpoint source pollution, sequestering carbon and providing an abundance of ecological services, the inventory and characterization of wetland habitats are most often limited to small areas. This explains why the understanding of their ecological functioning is still insufficient for a reliable functional assessment on areas larger than a few hectares. While LiDAR data and multispectral Earth Observation (EO) images are often used separately to map wetland habitats, their combined use is currently being assessed for different habitat types. The aim of this study is to evaluate the combination of multispectral and multiseasonal imagery and LiDAR data to precisely map the distribution of wetland habitats. The image classification was performed combining an object-based approach and decision-tree modeling. Four multispectral images with high (SPOT-5) and very high spatial resolution (Quickbird, KOMPSAT-2, aerial photographs) were classified separately. Another classification was then applied integrating summer and winter multispectral image data and three layers derived from LiDAR data: vegetation height, microtopography and intensity return. The comparison of classification results shows that some habitats are better identified on the winter image and others on the summer image (overall accuracies = 58.5 and 57.6%). They also point out that classification accuracy is highly improved (overall accuracy = 86.5%) when combining LiDAR data and multispectral images. Moreover, this study highlights the advantage of integrating vegetation height, microtopography and intensity parameters in the classification process. This article demonstrates that information provided by the synergetic use of multispectral images and LiDAR data can help in wetland functional assessment 相似文献
13.
Mapping forest structure variables provides important information for the estimation of forest biomass, carbon stocks, pasture suitability or for wildfire risk prevention and control. The optimization of the prediction models of these variables requires an adequate stratification of the forest landscape in order to create specific models for each structural type or strata. This paper aims to propose and validate the use of an object-oriented classification methodology based on low-density LiDAR data (0.5 m?2) available at national level, WorldView-2 and Sentinel-2 multispectral imagery to categorize Mediterranean forests in generic structural types. After preprocessing the data sets, the area was segmented using a multiresolution algorithm, features describing 3D vertical structure were extracted from LiDAR data and spectral and texture features from satellite images. Objects were classified after feature selection in the following structural classes: grasslands, shrubs, forest (without shrubs), mixed forest (trees and shrubs) and dense young forest. Four classification algorithms (C4.5 decision trees, random forest, k-nearest neighbour and support vector machine) were evaluated using cross-validation techniques. The results show that the integration of low-density LiDAR and multispectral imagery provide a set of complementary features that improve the results (90.75% overall accuracy), and the object-oriented classification techniques are efficient for stratification of Mediterranean forest areas in structural- and fuel-related categories. Further work will be focused on the creation and validation of a different prediction model adapted to the various strata. 相似文献
14.
The urban land cover mapping and automated extraction of building boundaries is a crucial step in generating three-dimensional city models. This study proposes an object-based point cloud labelling technique to semantically label light detection and ranging (LiDAR) data captured over an urban scene. Spectral data from multispectral images are also used to complement the geometrical information from LiDAR data. Initial object primitives are created using a modified colour-based region growing technique. Multiple classifier system is then applied on the features extracted from the segments for classification and also for reducing the subjectivity involved in the selection of classifier and improving the precision of the results. The proposed methodology produces two outputs: (i) urban land cover classes and (ii) buildings masks which are further reconstructed and vectorized into three-dimensional buildings footprints. Experiments carried out on three airborne LiDAR datasets show that the proposed technique successfully discriminates urban land covers and detect urban buildings. 相似文献
15.
机载多光谱LiDAR系统能够快速、准确地获取地物的空间几何和光谱信息,为地物覆盖分类和目标识别提供新的数据源。近年来,基于三维点云的深度学习算法取得了一系列突破性进展,然而直接将不规则的原始点云数据输入深度学习模型进行基于点的分类存在一定的困难。本文提出了一种基于FPS-KNN的样本生成方法,用于基于深度学习的机载多光谱LiDAR数据分类。该方法首先对输入数据进行归一化处理;然后利用最远点采样方法(FPS)和K近邻法(KNN)在输入数据中生成一系列规则大小的训练样本数据集。通过机载多光谱LiDAR数据的试验表明,该方法所生成的样本不仅符合卷积神经网络所要求的输入数据形式,而且能够确保对输入场景的完整覆盖。 相似文献
16.
Evaluation of Goddard’s LiDAR,hyperspectral, and thermal data products for mapping urban land-cover types 总被引：1，自引：0，他引：1
Goddard’s LiDAR (Light Detection And Ranging), hyperspectral and thermal (G-LiHT) airborne imager is a new system to advance concepts of data fusion for worldwide applications. A recent G-LiHT mission conducted in June 2016 over an urban area opens a new opportunity to assess the G-LiHT products for urban land-cover mapping. In this study, the G-LiHT hyperspectral and LiDAR-canopy height model (LiDAR-CHM) products were evaluated to map five broad land-cover types. A feature/decision-level fusion strategy was developed to integrate two products. Contemporary data processing techniques were applied, including object-based image analysis, machine-learning algorithms, and ensemble analysis. Evaluation focused on the capability of G-LiHT hyperspectral products compared with multispectral data with similar spatial resolution, the contribution of LiDAR-CHM, and the potential of ensemble analysis in land-cover mapping. The results showed that there was no significant difference between the application of the G-LiHT hyperspectral product and simulated Quickbird data in the classification. A synthesis of G-LiHT hyperspectral and LiDAR-CHM products achieved the best result with an overall accuracy of 96.3% and a Kappa value of 0.95 when ensemble analysis was applied. Ensemble analysis of the three classifiers not only increased the classification accuracy but also generated an uncertainty map to show regions with a robust classification as well as areas where classification errors were most likely to occur. Ensemble analysis is a promising tool for land-cover classification. 相似文献
17.
机载LiDAR点云的分类是利用其进行城市场景三维重建的关键步骤之一。为充分利用现有的图像领域性能较好的深度学习网络模型,提高点云分类精度,并降低训练时间和对训练样本数量的要求,本文提出一种基于深度残差网络的机载LiDAR点云分类方法。首先提取归一化高程、表面变化率、强度和归一化植被指数4种具有较高区分度的点云低层次特征;然后通过设置不同的邻域大小和视角,利用所提出的点云特征图生成策略,得到多尺度和多视角点云特征图;再将点云特征图输入到预训练的深度残差网络,提取多尺度和多视角深层次特征;最后构建并训练神经网络分类器,利用训练的模型对待分类点云进行预测,经后处理得到分类结果。利用ISPRS三维语义标记竞赛的公开标准数据集进行试验,结果表明,本文方法可有效区分建筑物、地面、车辆等8类地物,分类结果的总体精度为87.1%,可为城市场景三维重建提供可靠的信息。 相似文献
18.
Full-waveform topographic LiDAR data provide more detailed information about objects along the path of a laser pulse than discrete-return (echo) topographic LiDAR data. Full-waveform topographic LiDAR data consist of a succession of cross-section profiles of landscapes and each waveform can be decomposed into a sum of echoes. The echo number reveals critical information in classifying land cover types. Most land covers contain one echo, whereas topographic LiDAR data in trees and roof edges contained multi-echo waveform features. To identify land-cover types, waveform-based classifier was integrated single-echo and multi-echo classifiers for point cloud classification.The experimental area was the Namasha district of Southern Taiwan, and the land-cover objects were categorized as roads, trees (canopy), grass (grass and crop), bare (bare ground), and buildings (buildings and roof edges). Waveform features were analyzed with respect to the single- and multi-echo laser-path samples, and the critical waveform features were selected according to the Bhattacharyya distance. Next, waveform-based classifiers were performed using support vector machine (SVM) with the local, spatial features of waveform topographic LiDAR information, and optical image information. Results showed that by using fused waveform and optical information, the waveform-based classifiers achieved the highest overall accuracy in identifying land-cover point clouds among the models, especially when compared to an echo-based classifier. 相似文献
19.
遥感数据的海量堆积与应用信息的匮乏日益凸显信息认知提取的重要性,在地学信息图谱方法论的指导下,同时参考视觉认知流程,提出了遥感信息图谱认知方法用于遥感数据的自动解译。在地理信息系统的统一框架下逐步挖掘多源遥感数据的"图"、"谱"特征并进行图谱耦合分析,通过多尺度分割、特征分析、监督学习等关键步骤完成"察觉—分辨—确认"的地学认知流程,初步满足自动化和智能化应用需求。在土地覆盖信息自动解译应用中建立了基于"图谱"先验知识的管理与运用机制以实现自动化,采用机器学习算法提升智能化程度,并以自适应迭代控制模型使结果精度向最优逼近。选取了珠江三角洲的试验区域进行了基于ALOS多光谱影像的土地覆盖自动分类,结果符合预期,说明了本文方法的可行性。 相似文献