共查询到20条相似文献，搜索用时 31 毫秒
1.
The failure of slope is a progressive process, and the whole sliding surface is caused by the gradual softening of soil strength of the potential sliding surface. From this viewpoint, a local dynamic strength reduction method is proposed to capture the progressive failure of slope. This method can calculate the warning deformation of landslide in this study. Only strength parameters of the yielded zone of landslide will be reduced by using the method. Through continuous local reduction of the strength parameters of the yielded zone, the potential sliding surface developed gradually and evolved to breakthrough finally. The result shows that the proposed method can simulate the progressive failure of slope truly. The yielded zone and deformation of landslide obtained by the method are smaller than those of overall strength reduction method. The warning deformation of landslide can be obtained by using the local dynamic strength reduction method which is based on the softening characteristics of the sliding surface. 相似文献
2.
A method combining numerical analysis and limit equilibrium theory to determine potential slip surfaces in soil slopes 总被引：1，自引：0，他引：1
This paper describes a precise method combining numerical analysis and limit equilibrium theory to determine potential slip surfaces in soil slopes. In this method, the direction of the critical slip surface at any point in a slope is determined using the Coulomb’s strength principle and the extremum principle based on the ratio of the shear strength to the shear stress at that point. The ratio, which is considered as an analysis index, can be computed once the stress field of the soil slope is obtained. The critical slip direction at any point in the slope must be the tangential direction of a potential slip surface passing through the point. Therefore, starting from a point on the top of the slope surface or on the horizontal segment outside the slope toe, the increment with a small distance into the slope is used to choose another point and the corresponding slip direction at the point is computed. Connecting all the points used in the computation forms a potential slip surface exiting at the starting point. Then the factor of safety for any potential slip surface can be computed using limit equilibrium method like Spencer method. After factors of safety for all the potential slip surfaces are obtained, the minimum one is the factor of safety for the slope and the corresponding potential slip surface is the critical slip surface of the slope. The proposed method does not need to pre-assume the shape of potential slip surfaces. Thus it is suitable for any shape of slip surfaces. Moreover the method is very simple to be applied. Examples are presented in this paper to illustrate the feasibility of the proposed method programmed in ANSYS software by macro commands. 相似文献
3.
使用双参数折减方法分析边坡稳定性的研究较多, 如何把两个折减系数定义为单一的综合安全系数是目前研究的一项重要内容。Isakov提出的最短折减路径法能够保证在不同工况下得到最小安全系数, 但是该方法的缺点在于计算复杂, 不适合工程应用。通过有限元数值模拟, 利用最短折减路径方法计算不同强度黏土构成的不同坡度均质土坡的最小安全系数和对应的折减系数, 探索了最小安全系数与土的初始黏聚力、内摩擦角以及边坡坡度的关系, 分析了初始强度对折减系数的影响。结果表明, 相同坡度下不同强度的黏土边坡在失稳时, 最小安全系数对应的临界破坏强度相同。临界破坏强度与坡度近似成线性正相关关系。由此基于最短折减路径法提出了一种新的计算最小安全系数的方法, 该方法得到的安全系数与目前常用的极限平衡方法所得结果相近, 并且计算简单, 因此可以用于边坡稳定性分析。 相似文献
4.
在多级滑坡的渐进破坏过程中, 滑带不同部位的屈服程度和破坏模式不同, 强度参数也不同。在强降雨条件下, 坡表产生的张拉裂缝充水, 会产生静水压力。当前广泛应用的传递系数法对滑带不同位置取同一强度参数, 也尚未考虑到静水压力作用。为此提出了一种考虑静水压力作用和滑带不同部位强度参数差异的改进传递系数法, 对降雨引起的西安市柳西村南部的牛角沟滑坡进行了计算。结果表明: 与不考虑静水压力和滑带不同部位强度参数差异的计算方法比, 改进传递系数法计算的抗滑力相对较小, 剩余下滑力计算结果相对较大, 各级滑坡稳定性系数分别减小了约33.26%、17.92%、24.95和16.94%;而改进前的稳定性系数偏高, 可能会导致支挡工程的安全储备不足。本研究提出的改进传递系数法可为多级滑坡处置提供更安全的参考。 相似文献
5.
The right-bank slope of the Dagangshan hydropower station located in Southwest China is a highly unloaded rock slope. Moreover, large-scale natural faults were detected in the slope body; some excavation-induced unloading fractures were discovered at elevations between 1075m and 1146m. Because of poor tectonic stability, the excavation work was suspended in September 2009, and six largescale anti-shear galleries were employed to replace the weak zone in the slope body to reinforce the rightbank slope. In this study, based on microseismicmonitoring technology and a numerical-simulation method, the stabilities of the slope with and without the reinforcement are analysed. An in-situ microseismic-monitoring system is used to obtain quantitative information about the damage location, extent, energy, and magnitude of the rocks. Thus, any potential sliding block in the right-bank slope can be identified. By incorporating the numerical results along with the microseismic-monitoring data, the stress concentration is found to largely occur around the anti-shear galleries, and the seismic deformation near the anti-shear galleries is apparent, particularly at elevations of 1210, 1180, 1150, and 1120m. To understand the interaction mechanism between the anti-shear gallery and the surrounding rock, a 2D simulation of the potential damage process occurring in an anti-shear gallery is performed. The numerical simulation helps in obtaining additional information about the stress distribution and failure-induced stress re-distribution in the vicinity of the anti-shear galleries that cannot be directly observed in the field. Finally, the potential sliding surface of the right-bank slope is numerically obtained, which generally agrees with the spatial distribution of the in-situ monitored microseismic events. The safety factor of the slope reinforced with the anti-shear gallery increases by approximately 36.2%. Both the numerical results and microseismic data show that the anti-shear galleries have a good reinforcement effect. 相似文献
6.
The stability of rock slope is often controlled by the existing discontinuous surfaces, such as discrete fractures, which are ubiquitously distributing in a geological medium. In contrast with the traditional approaches used in soil slope with a continuous assumption, the simulation methods of jointed rock slope are different from that of in soil slope. This paper presents a study on jointed rock slope stability using the proposed discontinuous approach, which considers the effects of discrete fractures. Comparing with traditional methods to model fractures in an implicit way, the presented approach provides a method to simulate fractures in an explicit way, where grids between rock matrix and fractures are independent. To complete geometric components generation and mesh partition for the model, the corresponding algorithms were devised. To evaluate the stability state of rock slope quantitatively, the strength reduction method was integrated into our analysis framework. A benchmark example was used to verify the validation of the approach. A jointed rock slope, which contains natural fractures, was selected as a case study and was simulated regarding the workflow of our framework. It was set up in the light of the geological condition of the site. Slope stability was evaluated under different loading conditions with various fracture patterns. Numerical results show that fractures have significant contributions to slope stability, and different fracture patterns would lead to different shapes of the slip surface. The devised method has the ability to calculate a non-circular slip surface, which is different from a circular slip surface obtained by classical methods. 相似文献
7.
基于有限元强度折减系数法原理,应用具有折减分析功能的ANSYS软件,以暴雨工况为最不利控制工况,采用平面应变条件下Drucker-Prage关联流动屈服准则(DP4)和边坡失稳破坏综合判据,分别对龙胜县城桑江北区不稳定高切边坡自然状态和削坡及抗滑桩加固状态进行了强度折减数值模拟。确定了这2种状态边坡最危险滑动面位置、形状并给出了极限状态坡体强度储备安全系数,通过所建桩-土共同作用连续介质模型及ANSYS后处理路径分析功能,求得极限状态滑坡设计推力和桩身内力及其分布,且将该法分析结果与传统分析方法作对比,发现误差很小且该法更接近边坡实际情况。综合分析表明,该法在岩土边坡滑坡灾害防治方面是可行且有效的新途径,有其自身的优越性和广阔的发展前景。 相似文献
8.
本文以黄河上游某拟建水电站坝址场地为例,论证了圈闭地形内斜坡破坏的多期性和规律性问题。在充分的野外调查和室内研究资料的基础上,将区内的斜坡破坏分为两期,即第一期为已经失稳的老滑坡群;第二期为发育在第一期滑坡群圈闭状破裂壁之后的正处于蠕动和破坏阶段的变形坡体,进而将第一期的滑坡分为两个强度次序。同时,还揭示了圈闭地形内斜坡破坏的规律性,即随着期和序次的增高,斜坡破坏面积增大,滑坡个数增多,规模减小,强度降低,滑距变短,滑体破碎程度变弱。最后指出,上述多期性和规律性应具有普遍性意义。 相似文献
9.
含优势渗流层边坡在降雨入渗的作用下其渗流场往往具有较高的不确定性,这给边坡的稳定性评价带来困难,通常采用概率的方法解决此类问题。针对含优势渗流层边坡降雨入渗下的可靠度问题,通过将应力分析中的点估计-有限元法引入到边坡渗流-稳定性分析,提出了考虑优势渗流层渗透特性不确定性的渗流概率分析和边坡可靠度分析方法;其次以广西某含碎石夹层土坡为例,分析了降雨入渗下碎石夹层的优势渗流效应及渗流概率,并基于此开展了该边坡降雨入渗下的可靠度分析。结果表明:①含优势渗流层边坡雨水沿优势渗流层渗入坡体内部的深度显著高于沿坡面渗入的深度;优势渗流层渗透特性的不确定性对渗流结果的影响较大,使得边坡稳定性分析具有较强的不确定性;②随着雨水入渗持时的增加,含优势渗流层边坡不同滑动面的失效概率总体呈现增加趋势,最危险滑动面的位置不断向边坡下部演化;依托工程滑动面位置的预测结果与工程实际吻合;③提出的概率分析方法适用于分析含优势渗流层边坡降雨入渗影响下的稳定性问题,而且具有计算量小的优势,可作这类边坡可靠度分析的一种新方法。 相似文献
10.
水库滑坡变形破坏受其岩土体蠕变特性及环境因素的影响。当滑坡进入加速变形阶段后,变形骤然增大,失稳概率增加。为了研究滑坡岩土体蠕变特性及其稳定性,选取锦屏一级水电站呷爬滑坡为研究对象,采用坡表位移监测曲线分析与室内三轴蠕变试验相结合的方法,建立了Burgers蠕变模型结合FLAC3D软件进行了滑坡稳定性研究。分析坡表位移-时间曲线发现,坡体变形特征与一般滑坡土体的蠕变特征具有相似性,滑带土室内三轴蠕变试验结果表明,滑带土变形可划分为瞬时蠕变、减速蠕变与稳定蠕变3个阶段,同时其瞬时变形量、稳定蠕变速率均随围压以及应力水平的增大而增大。基于滑带土蠕变特性的Burgers蠕变模型的计算结果,对比了常规强度折减法与考虑蠕变的强度折减法的滑坡稳定性系数,计算结果表明呷爬滑坡目前处于稳定状态,在一个计算周期内考虑蠕变的强度折减法较常规强度折减法的稳定性系数下降了0.04,因此,揭示滑坡土体蠕变特性并在此基础上研究其稳定性具有实际意义。 相似文献
11.
风险分析与评估是解决边坡固有不确定性的重要工具, 但同时考虑外在荷载和内在岩土力学参数的不确定性, 对边坡进行系统定量风险分析的研究较少。以西藏扎拉水电站厂后倾倒变形边坡为例, 基于场地地震峰值加速度概率密度函数和不同地震峰值加速度下边坡失稳概率拟合函数, 采用数值积分计算了边坡在设计基准期的失稳概率, 并采用离散元方法对边坡失稳后的影响范围进行了数值模拟, 在此基础上进行了承灾体易损性分析及定量风险计算, 最后采用ALARP准则进行了风险评价。研究表明, 考虑地震危险性条件下, 扎拉水电站厂后倾倒变形边坡在50 a设计基准期内失稳概率为0.061 9;边坡对水电站地面厂房存在较大威胁, 相应财产风险为5 482万元; 根据ALARP准则, 边坡风险处于不可接受区, 需采取措施防范或规避风险。研究成果对于边坡治理工程决策及风险管理具有指导意义。 相似文献
12.
A generalized limit equilibrium method for the solution of active earth pressure on a retaining wall
In this paper, a generalized limit equilibrium method of solving the active earth pressure problem behind a retaining wall is proposed. Differing from other limit equilibrium methods, an arbitrary slip surface shape without any assumptions of pre-defined shapes is needed in the current framework, which is verified to find the most probable failure slip surface. Based on the current computational framework, numerical comparisons with experiment, discrete element method and other methods are carried out. In addition, the influences of the inclination of the wall, the soil cohesion, the angle of the internal friction of the soil, the slope inclination of the backfill soil on the critical pressure coefficient of the soil, the point of application of the resultant earth pressure and the shape of the slip surface are also carefully investigated. The results demonstrate that limit equilibrium solution from predefined slip plane assumption, including Coulomb solution, is a special case of current computational framework. It is well illustrated that the current method is feasible to evaluate the characteristics of earth pressure problem. 相似文献
13.
The excavated height of the left bank slope of the diversion power system intake in Jinchuan hydropower station is about 16o m. The stability and safety of the slope during construction and its operation/utilization become one of the most important geological engineering problems. At the same time, it is also crucial to select a safe and economic excavation gradient for the construction. We studied the problem of how to select a safe and economic slope ratio by analyzing the geological condition of the high slope, including the lithology, slope structure, structural surface and their combinations, rock weathering and unloading, hydrology, and the natural gradient. The study results showed that the use of an excavation gradient larger than the gradient observed during site investigation and the gradient recommended in standards and field practice manuals is feasible. Then, we used the finite element method and rigid limit equilibrium method to evaluate the stability of the excavation slope under natural, rainstorm and earthquake conditions. The calculated results showed that the excavated slope only has limited failure, but its stability is greatly satisfactory. The research findings can be useful in excavation and slope stabilization projects. 相似文献
14.
由于传统搜索方法对岩质边坡滑裂面的确定无法兼顾效率与精度, 如何迅速准确确定潜在滑裂面仍然是个难题。极限平衡法在岩质边坡稳定性分析中备受认可, 采用岩质边坡平面剪切滑动模型, 以滑裂面的倾角来表征潜在滑裂面的位置; 基于极值法, 推导了极限平衡条件下平面剪切破坏型岩质边坡潜在滑裂面的解析解, 并结合香港秀茂坪路边坡对其准确性进行了验证, 进一步对四川宜宾打营盘山公路多级边坡进行了整体稳定性分析。结果表明: 香港秀茂坪边坡采用本文方法确定的边坡潜在滑裂面倾角与实际滑坡倾角基本一致。实际工程应用中, 采用Slide软件中布谷鸟搜索法和模拟退火法两种搜索方法得到的滑裂面倾角分别为38.0°和37.0°, 本解析法所得倾角为34.8°; 选用Janbu法、Morgenstern-Price法和Sarma法分别计算对应的稳定系数, 结果均为1.04左右, 本文所得稳定系数为1.15, 可见本文方法所得结果基本准确。通过参数敏感性分析发现, 随着黏聚力的增加, 边坡滑裂面倾角越来越小, 稳定系数也随之增加; 而当内摩擦角增大时, 边坡滑裂面倾角和稳定系数也随之增大。 相似文献
15.
The E24 profile slope analyzed belongs to a series of excavated slopes of the Haizhou Opencast Coal Mine. It seems to be divided into Downslope Part and Upslope Part. Its profile comprises two noticeable coal seams, called the 8# and 9# weak layers, considered as the potential failure surfaces. In consideration of the actual configuration as in the perspective of any modification, assessing the stability of this slope with various profile forms under given conditions, and assessing the risk of instability and quantifying the influence of earthworks or other modifications to the stability of this slope, have constituted the primordial objectives carried out. From assumed potential failure surfaces, any specific profiles and specified slip surfaces are defined. A factor of safety (FoS) is computed for each specified slip surface; the smallest FoS found corresponds to the least favorable slip surface. The safety factor values obtained are compared to the suggested safety factor. Limit equilibrium methods of vertical slices implemented in Slope/W, computer program for slope stability analyses, have been adopted to perform the E24 slope stability analysis. The safety factor values computed with 9# weak layer are lower than for 8#; the factors of safety obtained with Sarma's method are the smallest; more, without groundwater (long term) overall values are greater than those determined under groundwater condition (short term). The lowest safety factor value is found for a profile depending on an adopted earthwork sequence. The E24 profile slope stability analysis shows the instability risk for the deepest weak layer, and also shows the short and long term stability of this slope for the envisaged earth movements. However it demonstrates the existence of instability risk for any earthwork firstly affecting the downslope part. 相似文献
16.
Simplice F. BOBY 《东北亚地学研究》2007,10(2):171-184
The E24 profile slope analyzed belongs to a series of excavated slopes of the Haizhou Opencast Coal Mine. It seems to be divided into Downslope Part and Upslope Part. Its profile comprises two noticeable coal seams, called the 8# and 9# weak layers, considered as the potential failure surfaces. In consideration of the actual configuration as in the perspective of any modification, assessing the stability of this slope with various profile forms under given conditions, and assessing the risk of instability and quantifying the influence of earthworks or other modifications to the stability of this slope, have constituted the primordial objectives carried out. From assumed potential failure surfaces, any specific profiles and specified slip surfaces are defined. A factor of safety (FoS) is computed for each specified slip surface; the smallest FoS found corresponds to the least favorable slip surface. The safety factor values obtained are compared to the suggested safety factor. Limit equilibrium methods of vertical slices implemented in Slope/W, computer program for slope stability analyses, have been adopted to perform the E24 slope stability analysis. The safety factor values computed with 9# weak layer are lower than for 8#; the factors of safety obtained with Sarma's method are the smallest; more, without groundwater (long term) overall values are greater than those determined under groundwater condition (short term). The lowest safety factor value is found for a profile depending on an adopted earthwork sequence. The E24 profile slope stability analysis shows the instability risk for the deepest weak layer, and also shows the short and long term stability of this slope for the envisaged earth movements. However it demonstrates the existence of instability risk for any earthwork firstly affecting the downslope part. 相似文献
17.
Cracks in rock or soil slopes influence the stability and durability of the slopes. Seismic forces can trigger slope disasters, particularly in the cracked slopes. Considering the nonlinear characteristics of materials, the more generalized nonlinear failure criterion proposed by Baker is adopted. The influence of non-dimensional strength parameters on the stability of cracked slopes under earthquakes is performed using the upper bound limit analysis. The seismic displacement is calculated by adopting the logarithmic spiral failure surface according to the sliding rigid block model. Based on the existing studies, two methods for the stability analysis of cracked slopes under earthquakes are introduced: the pseudo-static method(with the factor of safety(Fs) as an evaluation index), and the displacement-based method(with the seismic displacement as an evaluation index). The pseudo-static method can only determine the instantaneous stability state of the cracked slope, yet the displacement-based methodreflects the stability variation of cracked slopes during earthquakes. The results indicate that the nondimensional strength parameters affect the factor of safety and seismic displacement of slopes significantly. The non-dimensional strength parameter(n) controlling the curvature of strength function shapes on the slope stability is affected by other parameters. Owing to cracks, the effect of non-dimensional strength parameters on seismic displacement becomes more significant. 相似文献
18.
在持续降雨或开挖卸荷作用下, 土体的强度指标会发生劣化, 但现今采用的边坡稳定性计算大多直接将其视为一个常数。为接近真实的边坡失稳破坏模式, 基于瑞典条分法以及一阶线性应变软化机制, 提出了一种边坡渐进破坏分析新方法, 推导出应变软化型边坡极限平衡表达式, 并获得了各破坏进度下边坡的安全系数。通过对模拟算例进行分析, 证明了条分-软化法的可靠性, 且计算结果表明渐进破坏过程中安全系数不仅取决于边坡的破坏方式与强度参数, 还与岩土体的软化模量密切相关。同时, 通过与滑坡实际案例的对比验算, 证实其强度指标存在不同的衰减系数, 即黏聚力的衰减系数大于摩擦角。从理论到应用, 最终获得的条分-软化法, 不仅考虑了岩土体的强度劣化效应以及滑动面的渐进发展, 还能有效地服务于实际工程背景下边坡的稳定性分析, 可以为滑坡的预防与治理提供指导建议。 相似文献
19.
边坡条分法物理意义是以强度折减表征材料峰值强度的下降程度。以不平衡推力部分强度折减法为例,推广传统假设,应用理想弹塑性模型和全过程剪应力-应变模型,在峰值剪应力和峰值应变相等条件下,模拟边坡的渐进破坏过程;提出了临界状态决定法,随着临界状态逐步移动,边坡不平衡力和驱动力越来越大,抗滑力越来越小,直至整体处于破坏状态。以湖北省恩施州稻池村边坡为例,以3种数值(部分强度折减、理想弹塑性和全过程剪应力-应变本构)模型揭示边坡渐进破坏过程中各参量变化特征。结果表明:3种数值条块法均能描述稻池村边坡渐进破坏过程,基于条分法和理想弹塑性模型部分强度折减系数大于全过程剪应力-应变本构模型稳定系数。 相似文献
20.
The stability of soil-rock mixtures(SRMs) that widely distributed in slopes is of significant concern for slope safety evaluation and disaster prevention. The failure behavior of SRM slopes under surface loading conditions was investigated through a series of centrifuge model tests considering various volumetric gravel contents. The displacement field of the slope was determined with image-based displacement system to observe the deformation of the soil and the movement of the block during loading in the tests. The test results showed that the ultimate bearing capacity and the stiffness of SRM slopes increased evidently when the volumetric block content exceeded a threshold value. Moreover, there were more evident slips around the blocks in the SRM slope. The microscopic analysis of the block motion showed that the rotation of the blocks could aggravate the deformation localization to facilitate the development of the slip surface. The high correlation between the rotation of the key blocks and the slope failure indicated that the blocks became the dominant load-bearing medium that influenced the slope failure. The blocks in the sliding body formed a chain to bear the load and change the displacement distribution of the adjacent matrix sand through the block rotation. 相似文献