首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 625 毫秒
1.
In this study we examine the spectral and morphometric properties of the four important lunar mare dome fields near Cauchy, Arago, Hortensius, and Milichius. We utilize Clementine UV-vis multispectral data to examine the soil composition of the mare domes while employing telescopic CCD imagery to compute digital elevation maps in order to determine their morphometric properties, especially flank slope, height, and edifice volume. After reviewing previous attempts to determine topographic data for lunar domes, we propose an image-based 3D reconstruction approach which is based on a combination of photoclinometry and shape from shading. Accordingly, we devise a classification scheme for lunar mare domes which is based on a principal component analysis of the determined spectral and morphometric features. For the effusive mare domes of the examined fields we establish four classes, two of which are further divided into two subclasses, respectively, where each class represents distinct combinations of spectral and morphometric dome properties. As a general trend, shallow and steep domes formed out of low-TiO2 basalts are observed in the Hortensius and Milichius dome fields, while the domes near Cauchy and Arago that consist of high-TiO2 basalts are all very shallow. The intrusive domes of our data set cover a wide continuous range of spectral and morphometric quantities, generally characterized by larger diameters and shallower flank slopes than effusive domes. A comparison to effusive and intrusive mare domes in other lunar regions, highland domes, and lunar cones has shown that the examined four mare dome fields display such a richness in spectral properties and 3D dome shape that the established representation remains valid in a more global context. Furthermore, we estimate the physical parameters of dome formation for the examined domes based on a rheologic model. Each class of effusive domes defined in terms of spectral and morphometric properties is characterized by its specific range of values for lava viscosity, effusion rate, and duration of the effusion process. For our data set we report lava viscosities between about 102 and , effusion rates between 25 and , and durations of the effusion process between three weeks and 18 years. Lava viscosity decreases with increasing R415/R750 spectral ratio and thus TiO2 content; however, the correlation is not strong, implying an important influence of further parameters like effusion temperature on lava viscosity.  相似文献   

2.
In this study, we examine the lunar mare dome Mee 1 situated near the craters Mee H and Drebbel F in a region showing evidence of ancient (pre-Orientale) mare volcanism and cryptomare deposits. Regional stratigraphic relations indicate that Mee 1 was formed prior to the Orientale impact at the beginning of the Imbrian period. Based on a combined photoclinometry and shape from shading technique applied to telescopic CCD images of the dome acquired under oblique illumination, we determined a diameter of Mee 1 of 25 km, a height of 250 m, a flank slope of 1.15°, and a volume of . Based on rheologic modelling of the dome and a viscoelastic model of the feeder dike, we obtained a magma viscosity of , an effusion rate of , a duration of the effusion process of 1.6 years, a magma rise speed of , a width of the feeder dike of 32 m, and a horizontal dike length of 144 km. A comparison of Mee 1 with domes with similar morphometric properties, which are located near Milichius and inside the crater Petavius, reveals strong similarities with respect to the viscosity of the dome-forming magma and the feeder dike geometry, while the effusion rate and magma rise speed of Mee 1 are somewhat higher. The pronounced morphometric differences between Mee 1 and a smaller dome situated close to the crater Doppelmayer and characterised by a similar magma viscosity suggest that the growth of that dome was limited by exhaustion of the magma reservoir, while Mee 1 and the other larger domes display morphometric properties presumably coming closer to the cooling limit. The comparison of the ancient dome Mee 1 with the younger (Eratosthenian) edifices near Milichius and Doppelmayer suggests that the conditions in the upper mantle and the crust favoured high eruption volumes, effusion rates, and magma rise speeds, implying the occurrence of large magma reservoirs preventing the limitation of dome growth by magma exhaustion. On the other hand, we observe similar general morphometric, rheologic, and feeder dike characteristics and, thus, conclude that the formation conditions of lunar mare domes did not change fundamentally during the Imbrian period.  相似文献   

3.
A classification of over 200 lunar mare domes shows that they have two major modes of occurrence: (1) low, flat, generally circular structures with convex shapes, slopes less than about 5°, and displaying summit craters, and (2) irregular structures often adjacent to highland regions and rarely containing summit craters. On the basis of morphologic and morphometric similarities, the first mode of occurrence appears to be analogous to small terrestrial shield volcanoes, and to represent primary volcanic constructs, while the second class of domes appears to result from secondary volcanic effects (flooding of highland material to produce kipukas and draping of lavas to produce irregular dome-like topography).Domes comparable to small shield volcanoes generally range from 3–17 km in diameter and up to several hundred meters in height and occur predominantly in groupings in the lunar equatorial region in northeast Tranquillitatis (Cauchy area), between Kepler and Copernicus (Hortensius area), and in the Marius Hills. In the Marius Hills, domes generally lack summit craters and have a rough surface texture formed in part by superposed cones and steep-sided flows. Elsewhere, domes representing volcanic sources are smooth-surfaced and usually contain a summit crater. These features are similar in general morphology to small terrestrial lava shields. They are generally intermediate in volume, slope, and height between small shields of terrestrial basaltic plains (such as the Snake River Plains) and larger Icelandic shields. Summit craters on lunar domes are considerably larger than craters on terrestrial shields of comparable diameters, apparently due to a combination of factors, including vent enlargement during extrusion, possibly higher lunar extrusion rates, different amounts of collapse, and impact erosion.Most vent-related domes appear to be associated with, and are thus approximately the same age as, surrounding lava plains, although relationships in specific areas have not yet been established. On the basis of age ranges of mare deposits established by Apollo samples, mare vent-related domes formed over an approximately one billion year period starting about 3.7 b.y. ago. Extrusion rates were apparently relatively low compared to the very high values characteristic of flows associated with major lunar sinuous rilles and terrestrial flood basalts, but may have been relatively high compared to similar terrestrial shields. Large shield volcanoes equivalent to the terrestrial Hawaiian-type or to the martian edifices such as Olympus Mons, do not occur on the Moon. Lack of these features may be due to the low viscosities and high effusion rates typical of many lunar eruptions and the lack of continuous eruptions from single sources.Paper presented at the European Workshop on Planetary Sciences, organised by the Laboratorio di Astrofisica Spaziale di Frascati, and held between April 23–27, 1979, at the Accademia Nazionale del Lincei in Rome, Italy.  相似文献   

4.
The lunar surface is bathed in a variety of impacting particles originating from the solar wind, solar flares, and galactic cosmic rays. These particles can become embedded in the regolith and/or produce a range of other molecules as they pass through the target material. The Moon therefore contains a record of the variability of the solar and galactic particle fluxes through time. To obtain useful temporal snapshots of these processes, discrete regolith units must be shielded from continued bombardment that would rewrite the record over time. One mechanism for achieving this preservation is the burial of a regolith deposit by a later lava flow. The archival value of such deposits sandwiched between lava layers is enhanced by the fact that both the under- and over-lying lava can be dated by radiometric techniques, thereby precisely defining the age of the regolith layer and the geologic record contained therein. The implanted volatile species would be vulnerable to outgassing by the heat of the over-lying flow, at temperatures exceeding 300-700 °C. However, the insulating properties of the finely particulate regolith would restrict significant heating to shallow depths. We have therefore modeled the heat transfer between lunar mare basalt lavas and the regolith in order to establish the range of depths below which implanted volatiles would be preserved. We find that the full suite of solar wind volatiles, consisting predominantly of H and He, would survive at depths of ∼13-290 cm (for 1-10 m thick lava flows, respectively). A substantial amount of CO, CO2, N2 and Xe would be preserved at depths as shallow as 3.7 cm beneath meter-thick flows. Given typical regolith accumulation rates during mare volcanism, the optimal localities for collecting viable solar wind samples would involve stacks of thin mare lava flows emplaced a few tens to a few hundred Ma apart, in order for sufficient regolith to develop between burial events. Obtaining useful archives of Solar System processes would therefore require extraction of regolith deposits buried at quite shallow depths beneath radiometrically-dated mare lava flows. These results provide a basis for possible lunar exploration activities.  相似文献   

5.
In this study we examine a set of lunar mare domes located in the Hortensius/Milichius/T. Mayer region and in northern Mare Tranquillitatis with respect to their formation along crustal fractures, their rheologic properties, the dimensions of their feeder dikes, and the importance of magma evolution processes during dome formation. Many of these domes display elongated summit vents oriented radially with respect to major impact basins, and several dome locations are also aligned in these preferential directions. Analysis of Clementine UV/VIS and Lunar Prospector gamma ray spectrometer data reveals that the examined mare domes formed from low-Si basaltic lavas of high FeO and low to moderate TiO2 content. Based on their morphometric properties (diameter, height, volume) obtained by photoclinometric and shape from shading analysis of telescopic CCD images, we derive rheologic quantities (lava viscosity during eruption, effusion rate, duration of the effusion process, magma rise speed) and the dimensions of the feeder dikes. We establish three rheologic groups characterised by specific combinations of rheologic properties and dike dimensions, where the most relevant discriminative parameter is the lava viscosity η. The first group is characterised by and contains the domes with elongated vents in the Milichius/T. Mayer region and two similar domes in northern Mare Tranquillitatis. The second group with comprises the very low aligned domes in northern Mare Tranquillitatis, and the third group with the relatively steep domes near Hortensius and in the T. Mayer region. The inferred dike dimensions in comparison to lunar crustal thickness data indicate that the source regions of the feeder dikes are situated within the upper crust for six of the domes in northern Mare Tranquillitatis, while they are likely to be located in the lower crust and in the upper mantle for the other examined domes. By comparing the time scale of magma ascent with the time scale on which heat is conducted from the magma into the host rock, we find evidence that the importance of magma evolution processes during ascent such as cooling and crystallisation increases with lava viscosity. We conclude that different degrees of evolution of initially fluid basaltic magma are able to explain the broad range of lava viscosities inferred for the examined mare domes. The spectral data reveal that differences in TiO2 content may additionally account for the systematic difference in lava viscosity between the two examined lunar regions. We show that the described mechanisms are likely to be valid also for other lunar mare domes situated near Cauchy and Arago, regarded for comparison. On the other hand, we find for the Gruithuisen and Mairan highland domes that despite their inferred high lava viscosities of , no significant magma cooling in the dike occurred during ascent, supporting previous findings that the highland domes were formed during a specific phase of non-mare volcanism by highly silicic viscous lavas.  相似文献   

6.
Approximately 22,000 small domes have been identified on the 25% of the surface of Venus imaged by Venera 15/16. The word dome is used to imply a broad, lens-shaped, positive topographic feature. The domes: (1) are generally circular in planimetric outline; (2) range in diameter from the effective limit of Venera resolution (2 km) to 20 km; (3) show flank slopes generally 10 ° and possibly 5 °; and (4) occur in association with mottled plains units. Associated features include summit pits, radar bright surfaces, and basal topographic platforms. There are two significant areas of major dome concentrations approximately 180 ° in longitude apart: (1) the largest concentration occurs in the Akkruva Colles area of Niobe Planitia, centered at approximately 45 ° N/120 ° E, just north of the flanks of the Thetis Regio rise; and (2) another concentration occurs in northwestern Guinevere Planitia, centered at approximately 35 ° N/300 ° E, on the north flank of the Beta Regio rise. In addition to these major areas of concentrations, domes occur in smaller concenrations throughout the imaged area of Venus, in association with coronae, arachnoids, intermediate sized hills interpreted to be volcanic constructs, large volcanic centers and calderas. The characteristics and geologic associations of small domes are consistent with an interpretation of their origin as volcanic, and on the basis of their low slopes, individual characteristics, and geologic associations they are interpreted to represent dominantly effusive low shield volcanoes. The large number of small domes implies a large number of multiple centralized eruptions, each one of which represents a discrete, relatively small, volume of material available to build an edifice over a finite time period. Calculated modal volume is 0.73 km3 for individual edifices. Based on the number identified by Venera, the total number of small domes estimated for the entire planet 4.4 × 106 and total edifice volume over the entire planet represents a minimum volume equivalent to a layer approximately 7 m thick over the planet and representing 0.03% of the estimated crustal volume of Venus. In absolute number, size range, and distribution they appear to be similar to terrestrial oceanic seamounts. The global abundance and distribution, size frequency distribution, minimum size, and changes in these characteristics with latitude for the domes will be particularly important in understanding the way in which the domes form and their relationship to global models of tectonism and heat flow on Venus. Increased spatial resolution and coverage from Magellan data will enable a more thorough assessment of these features and associated questions, particularly where radar incidence angles are 15 °.'Geology and Tectonics of Venus', special issue edited by Alexander T. Basilevsky (USSR Acad. of Sci., Moscow), James W. Head (Brown University, Providence), Gordon H. Pettengill (MIT, Cambridge, Massachusetts) and R. S. Saunders (J.P.L., Pasadena).  相似文献   

7.
The lunar photometric function, which describes the dependency of the observed radiance on the observation geometry, is used for photometric correction of lunar visible/near-infrared data. A precise photometric correction parameter set is crucial for many applications including mineral identification and reflectance map mosaics. We present, for the first time, spectrally continuous photometric correction parameters for both sides of the Moon for wavelengths in the range 0.5-1.6 μm and solar phase angles between 5° and 85°, derived from Kaguya (SELENE) Spectral Profiler (SP) data. Since the measured radiance also depends on the surface albedo, we developed a statistical method for selecting areas with relatively uniform albedos from a nearly 7000-orbit SP data set. Using the selected data set, we obtained empirical photometric correction parameter sets for three albedo groups (high, medium, and low). We did this because the photometric function depends on the albedo, especially at phase angles below about 20° for which the shadow hiding opposition effect is appreciable. We determined the parameters in 160 bands and discovered a small variation in the opposition effect due to the albedo variation of mafic mineral absorption. The consistency of the photometric correction was checked by comparing observations made at different times of the same area on the lunar surface. Variations in the spectra obtained were lower than 2%, except for the large phase angle data in mare. Lastly, we developed a correction method for low solar elevation data, which is required for high latitude regions. By investigating low solar elevation data, we introduced an additional correction method. We used the new photometric correction to generate a 1° mesh global lunar reflectance map cube in a wavelength range of 0.5-1.6 μm. Surprisingly, these maps reveal that high latitude (?75°) regions in both the north and south have much lower spectral continuum slopes (color ratio r1547.7nm/r752.8nm ? 1.8) than the low and medium latitude regions, which implies lower degrees of space weathering.  相似文献   

8.
P.M. Schenk  R.R. Wilson 《Icarus》2004,169(1):98-110
Stereo and photoclinometry derived topography of shield-like volcanoes on Io indicate little relief (<3 km) and very low slopes (0.2° to 0.6°). Several shield volcanoes appear to be associated with broad rises of 1 to 3 km, but only 5 shield volcanoes have been identified with steep flank slopes (between 4° and 10°). These steep slopes are restricted to within 20-30 km of the summit, but where discernable, most of the lava flows observed on these edifices occur on the outer flanks where slopes are less than a degree. Despite their abundance, ionian shield volcanoes are among the flattest in the Solar System. The steepest volcanoes on Io are most comparable to large venusian shield volcanoes. Using simplistic Bingham rheologies we estimate the viscosity and yield strengths of ionian lavas. Yield strengths are estimated at 101-102 Pa, lower than most basaltic lavas. Viscosity estimates range from 103 to 105 Pa s, although these are probably upper limits. Actual values may have been as low as 100 Pa s. Viscosity is sensitive to flow velocity, which is poorly known on Io. The best constraint on flow velocity comes from observations of the 1997 Pillan eruption, which bracket the eruptive phase to 132 day maximum, and more probably less than 50 days. Low slopes, long run-out distances and our estimated rheologic properties are consistent with (but not proof of) a low silica, low viscosity, high temperature composition for ionian lavas, supporting arguments for low-silica lava compositions such as basalt or komatiite. We cannot eliminate sulfur on rheologic grounds, however.  相似文献   

9.
We use multispectral reflectance data from the lunar Clementine mission to investigate the impact ejecta deposits of simple craters in two separate lunar mare basalt regions, one in Oceanus Procellarum and one in Mare Serenitatis. Over 100 impact craters are studied, and for a number of these we observe differences between the TiO2 (and FeO) contents of their ejecta deposits and the lava flow units in which they are located. We demonstrate that, in the majority of cases, these differences cannot plausibly be attributed to uncorrected maturity effects. These observations, coupled with morphometric crater relationships that provide maximum crater excavation depths, allow the investigation of sub-surface lava flow stratigraphy. We provide estimated average thicknesses for a number of lava flow units in the two study regions, ranging from ∼80 m to ∼600 m. In the case of the Serenitatis study area, our results are consistent with the presence of sub-surface horizons inferred from recent radar sounding measurements from the JAXA Kaguya spacecraft. The average lava flow thicknesses we obtain are used to make estimates of the average flux of volcanic material in these regions. These are in broad agreement with previous studies, suggesting that the variation in mare basalt types we observe with depth is similar to the lateral variations identified at the surface.  相似文献   

10.
Giovanni Leone  Lionel Wilson 《Icarus》2011,211(1):623-635
We solve numerically the equations describing the transfer of heat through the lithosphere of Io by a mixture of conduction and volcanic advection as proposed by O’Reilly and Davies (O’Reilly, T.C., Davies, G.F. [1981]. Geophys. Res. Lett. 8, 313-316), removing the requirement that average material properties must be used. As expected, the dominance of advective heat transfer by volcanic eruptions means that Io’s geothermal gradient well away from volcanic centres is very small, of order 1 K km−1. This result is independent of any reasonable assumptions about the radiogenic heating rate in the lithosphere. The lithosphere temperature does not increase greatly above the surface temperature until the base of the lithosphere is approached, except in limited areas around shallow magma bodies. As a consequence, solid volatile sulphur compounds mobilized by volcanic processes and re-deposited on the surface of Io commonly remain solid until they reach great depths as they are progressively buried by ongoing activity. For current estimates of the volcanic heat transfer rate, melting of SO2 does not begin until a depth of ∼20 km and sulphur remains solid to a depth of ∼26 km in a 30 km thick lithosphere. Rising magmas can incorporate fluids from these deep sulphur compound aquifers, and we quantify the major influence that this can have on the bulk density of the magma and hence the resulting possible intrusion and eruption styles.  相似文献   

11.
We model the cratering of the Moon and terrestrial planets from the present knowledge of the orbital and size distribution of asteroids and comets in the inner Solar System, in order to refine the crater chronology method. Impact occurrences, locations, velocities and incidence angles are calculated semi-analytically, and scaling laws are used to convert impactor sizes into crater sizes. Our approach is generalizable to other moons or planets. The lunar cratering rate varies with both latitude and longitude: with respect to the global average, it is about 25% lower at (±65°N, 90°E) and larger by the same amount at the apex of motion (0°N, 90°W) for the present Earth-Moon separation. The measured size-frequency distributions of lunar craters are reconciled with the observed population of near-Earth objects under the assumption that craters smaller than a few kilometers in diameter form in a porous megaregolith. Varying depths of this megaregolith between the mare and highlands is a plausible partial explanation for differences in previously reported measured size-frequency distributions. We give a revised analytical relationship between the number of craters and the age of a lunar surface. For the inner planets, expected size-frequency crater distributions are calculated that account for differences in impact conditions, and the age of a few key geologic units is given. We estimate the Orientale and Caloris basins to be 3.73 Ga old, and the surface of Venus to be 240 Ma old. The terrestrial cratering record is consistent with the revised chronology and a constant impact rate over the last 400 Ma. Better knowledge of the orbital dynamics, crater scaling laws and megaregolith properties are needed to confidently assess the net uncertainty of the model ages that result from the combination of numerous steps, from the observation of asteroids to the formation of craters. Our model may be inaccurate for periods prior to 3.5 Ga because of a different impactor population, or for craters smaller than a few kilometers on Mars and Mercury, due to the presence of subsurface ice and to the abundance of large secondaries, respectively. Standard parameter values allow for the first time to naturally reproduce both the size distribution and absolute number of lunar craters up to 3.5 Ga ago, and give self-consistent estimates of the planetary cratering rates relative to the Moon.  相似文献   

12.
Lunar mare basalts, highland anorthosites and KREEP are the three major lunar rock types reported from the lunar surface. In the present study, we interpret the reflectance spectral behavior of lunar analog basalts including massive basalt, vesicular basalt and amygdaloidal basalt collected from the Deccan basaltic region, which are considered as equivalent of lunar mare basalts. Reflectance spectra of analog basalts were measured at three different environments: in the field, under controlled field conditions and in the lab. In field conditions the reflectance spectra were measured under 350-1050 nm spectral range. During controlled field and lab condition, reflectance spectra were measured under 350-2500 nm range covering the UV, visible, NIR, and SWIR regions. The spectral characteristics of basalts measured under different environments and their merits and demerits were discussed. However, lab spectra have given clear, reliable diagnostic spectral information for our present objective. The major oxides and minerals of analog basalts were compared with lunar mare basalts. The presence of Ca-pyroxene, ferrous and ferric iron and their diagnostic spectral features in basalts are discussed for study of lunar mare region.  相似文献   

13.
We use ROLO photometry (Kieffer, H.H., Stone, T.C. [2005]. Astron. J. 129, 2887-2901) to characterize the before and after full Moon radiance variation for a typical highlands site and a typical mare site. Focusing on the phase angle range 45° < α < 50°, we test two different physical models, macroscopic roughness and multiple scattering between regolith particles, for their ability to quantitatively reproduce the measured radiance difference. Our method for estimating the rms slope angle is unique and model-independent in the sense that the measured radiance factor I/F at small incidence angles (high Sun) is used as an estimate of I/F for zero roughness regolith. The roughness is determined from the change in I/F at larger incidence angles. We determine the roughness for 23 wavelengths from 350 to 939 nm. There is no significant wavelength dependence. The average rms slope angle is 22.2° ± 1.3° for the mare site and 34.1° ± 2.6° for the highland site. These large slopes, which are similar to previous “photometric roughness” estimates, require that sub-mm scale “micro-topography” dominates roughness measurements based on photometry, consistent with the conclusions of Helfenstein and Shepard (Helfenstein, P., Shepard, M.K. [1999]. Icarus 141, 107-131). We then tested an alternative and very different model for the before and after full Moon I/F variation: multiple scattering within a flat layer of realistic regolith particles. This model consists of a log normal size distribution of spheres that match the measured distribution of particles in a typical mature lunar soil 72141,1 (McKay, D.S., Fruland, R.M., Heiken, G.H. [1974]. Proc. Lunar Sci. Conf. 5, Geochim. Cosmochim. Acta 1 (5), 887-906). The model particles have a complex index of refraction 1.65-0.003i, where 1.65 is typical of impact-generated lunar glasses. Of the four model parameters, three were fixed at values determined from Apollo lunar soils: the mean radius and width of the log normal size distribution and the real part of the refraction index. We used FORTRAN programs from Mishchenko et al. (Mishchenko, M.I., Dlugach, J.M., Yanovitskij, E.G., Zakharova, N.T. [1999]. J. Quant. Spectrosc. Radiat. Trans. 63, 409-432; Mishchenko, M.I., Travis, L.D., Lacis, A.A. [2002]. Scattering, Absorption and Emission of Light by Small Particles. Cambridge Univ. Press, New York. <http://www.giss.nasa.gov/staff/mmishchenko/books.html>) to calculate the scattering matrix and solve the radiative transfer equation for I/F. The mean single scattering albedo is ω = 0.808, the asymmetry parameter is 〈cos Θ〉 = 0.77 and the phase function is very strongly peaked in both the forward and backward scattering directions. The fit to the observations for the highland site is excellent and multiply scattered photons contribute ?80% of I/F. We conclude that either model, roughness or multiple scattering, can match the observations, but that the strongly anisotropic phase functions of realistic particles require rigorous calculation of many orders of scattering or spurious photometric roughness estimates are guaranteed. Our multiple scattering calculation is the first to combine: (1) a regolith model matched to the measured particle size distribution and index of refraction of the lunar soil, (2) a rigorous calculation of the particle phase function and solution of the radiative transfer equation, and (3) application to lunar photometry with absolute radiance calibration.  相似文献   

14.
Direct detection of water in its vapour phase in the tenuous lunar environment through in situ measurements carried out by the Chandra’s Altitudinal Composition Explorer (CHACE) payload, onboard the Moon Impact Probe (MIP) of Chandrayaan I mission vindicates the presence of water on the surface of the moon in form of ice at higher lunar latitudes inferred from IR absorption spectroscopy, (especially that of OH), by the Moon Mineralogy Mapper (M3) of Chandrayaan I. The quadrupole mass spectrometer based payload, CHACE, sampled the lunar neutral atmosphere every 4 s with a broad latitudinal (∼40°N to 90°S, with a resolution of ∼0.1°) and altitudinal (from 98 km up to impact on the lunar surface with a resolution of ∼0.25 km) coverage in the sunlit side of the moon for the first time. These two (CHACE and M3) complementary experiments are shown to collectively provide unambiguous signatures for the distribution of water in solid and gaseous phases in Earth’s moon.  相似文献   

15.
The Rümker Hills, a volcanic dome-flow complex in the northern Oceanus Procellarum, is characterized by overlapping plains-forming units with lobate scarps, volcanic domes, a 60 km ring, and a scarp which separates the plateau from surrounding mare materials. Plains-forming units are interpreted as fluid volcanic flows, and domes as viscous extrusions. One dome may be a stratovolcano. The ring system is discordant with regional structural trends and probably has a local origin. The Rümker Hills is the closest lunar analog to the large martian shield structures revealed on the Mariner 9 photographs of Mars.  相似文献   

16.
We performed the first global survey of lunar regolith depths using Lunar Reconnaissance Orbiter Camera (LROC) data and the crater morphology method for determining regolith depth. We find that on both the lunar farside and in the nearside, non-mare regions, the regolith depth is twice as deep as it is within the lunar maria. Our data compare favorably with previous studies where such data exist. We also find that regolith depth correlates well with density of large craters (>20 km diameter). This result is consistent with the gradual formation of regolith by rock fracture during impact events.  相似文献   

17.
Magma genesis in the Moon could have been significantly altered by large impacts if they melted solidified residual liquids and late cumulates from the ‘magma ocean’. Calculations of the heat required to melt these materials, under different assumed conditions, are compared to estimates of the total kinetic energy of the Imbrium impact. For a significant amount of these materials to have been melted, they must have been near their solidus temperatures, the impacts must have been very large, and the lunar lithosphere must have been locally heated at depths of 70 to 140 km. Unless the Imbrium impact released at least the maximum estimated kinetic energy, only larger impacts, e.g., the proposed ‘Gargantuan’ impact, could have augmented the intrinsic lunar heat budget enough to locally alter the abundance, timing of eruption, and chemical compositions of lunar magmas. The mechanical and thermal energy generated by such an impact could have been critical in creating (1) the higher concentrations of radioactive elements in the Imbrium/Procellarum area by migration of residual liquids driven by differential lithospheric thickness; and (2) hybrid mare basalts (representing varying proportions of late cumulates and/or residual liquids incorporated into primitive magmas rising from the partially molten lunar interior). Complete compositional spectra of lunar basalts are to be expected, from primitive mare basalts to pure KREEP and to Ti-rich varieties. Comparison of the Gargantuan/Imbrium area with ancient basins in the eastern nearside area suggests that the interplay between the Moon's internal heat engine and the timing of large impacts was a crucial factor in determining the time of tunar volcanism and the chemical composition of the lavas.  相似文献   

18.
Observations of water ice clouds and dust are among the main scientific goals of the Planetary Fourier Spectrometer (PFS), a payload instrument of the European Mars Express mission. We report some results, obtained in three orbits: 37, 41 and 68. The temperature profile, and dust and water ice cloud opacities are retrieved from the thermal infrared (long-wavelength channel of PFS) in a self-consistent way using the same spectrum. Orographic ice clouds are identified above Olympus (orbit 37) and Ascraeus Mons (orbit 68). Both volcanoes were observed near noon at Ls=337° and 342°, respectively. The effective radius of ice particles is preliminary estimated as 1-3 μm, changing along the flanks. The corresponding visual opacity changes in the interval 0.2-0.4 above Olympus and 0.1-0.6 above Ascraeus Mons. In the case of Ascraeus Mons, the ice clouds were observed mainly above the Southern flank of the volcano with maximum opacity near the summit. In the case of Olympus, the clouds were found above both sides of the top. A different type of ice cloud is observed at latitudes above 50°N (orbit 68) in the polar hood: the effective particle radius is estimated to be 4 μm. Below the 1 mb level an inversion in the temperature profiles is found with maximum temperature at around 0.6 mb. Along orbit 68 it appears above Alba Patera, then it increases to the north and decreases above the CO2 polar cap. Beginning from latitude 20°S above Tharsis (orbit 68), the ice clouds and dust contribute equally to the spectral shape. Further on, the ice clouds are found everywhere along orbit 68 up to the Northern polar cap, except the areas between the Northern flank of Ascraeus Mons (below 10 km) and the edge of Alba Patera. Orbit 41 is shifted from the orbit 68 by roughly 180° longitude and passes through Hellas. Ice clouds are not visible in this orbit at latitudes below 80°S. The dust opacity is anticorrelated with the surface altitude. From 70°S to 25°N latitude the vertical dust distribution follows an exponential law with a scale height of 11.5±0.5 km, which corresponds to the gaseous scale height near noon and indicates a well-mixed condition. The 9 μm dust opacity, reduced to zero surface altitude, is found to be 0.25±0.05, which corresponds to a visual opacity of 0.5-0.7 (depending on the particle size).  相似文献   

19.
A large, circular marking ∼1800 km across is seen in near-infrared images of Titan. The feature is centered at 10°S, 120°W on Titan, encompasses much of Titan’s western Xanadu region, and has an off-center, quasi-circular, inner margin about 700 km across, with lobate outer margins extending 200-500 km from the inner margin. On the feature’s southern flank is Tui Regio, an area that has very high reflectivity at 5 μm, and is hypothesized to exhibit geologically recent cryovolcanic flows (Barnes, J.W. et al. [2006]. Geophys. Res. Lett. 33), similar to flows seen in Hotei Regio, a cryovolcanic area whose morphology may be controlled by pre-existing, crustal fractures resulting from an ancient impact (Soderblom, L.A. et al. [2009]. Icarus, 204). The spectral reflectivity of the large, circular feature is quite different than that of its surroundings, making it compositionally distinct, and radar measurements of its topography, brightness temperature and volume scattering also suggest that the feature is quite distinct from its surroundings. These and several other lines of evidence, in addition to the feature’s morphology, suggest that it may occupy the site of an ancient impact.  相似文献   

20.
Geology and stratigraphy of King crater, lunar farside   总被引：1，自引：0，他引：1  
Clementine and photographic data sets have been used to investigate the crustal stratigraphy and geology of King crater on the lunar farside (120°E, 5.5°N). Pre-existing topographic regimes or stress fields dominate many structures in the crater, which has excavated materials from depths of up to 14 km. The upper crust in the area is noritic anorthosite, grading to a more anorthositic signature with depth. A possible batholithic intrusion is also present in a 15-km-wide band, extending from the southern crater floor to at least 50 km north of King, and from near-surface levels down to at least the excavation depth of the crater. It is generally feldspathic, but is cut by mafic dykes now visible in the north wall. King also shows evidence for the presence of a cryptomare, exposed in regions of the peaks and in dark halo craters within the ejecta blanket. Localized olivine-bearing mineralogies are observed on the central peaks, suggesting isolated pockets of troctolitic mineralogies to have been present at 8- to 14-km depths. Copious volumes of crystalline melt produced from the impact event cover King’s floor to a maximum thickness of 30-60 m, and have pooled in a number of natural depressions outside of the main crater. The main pool in the pre-existing A1-Tusi crater has a minimum depth of 150 m. Domes on the crater floor are verified as nonvolcanic in origin, and did not act as a source for any of the lava-like materials in King.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号