The effects of possible contamination by sample holders on samples to be returned by Hayabusa2     

Naoki Shirai  Yuzuru Karouji  Kazuya Kumagai  Masayuki Uesugi  Kaori Hirahara  Motoo Ito  Naotaka Tomioka  Kentaro Uesugi  Akira Yamaguchi  Naoya Imae  Takuji Ohigashi  Toru Yada  Masanao Abe 《Meteoritics & planetary science》2020,55(7):1665-1680

Chemical compositions of materials used for new sample holders (vertically aligned carbon nanotubes [VACNTs] and polyimide film), which were developed for the analysis of Hayabusa2‐return samples, were determined by instrumental neutron activation analysis and/or instrumental photon activation analysis, to estimate contamination effects from the sample holders. The synthetic quartz plate used for the sample holders was also analyzed. Ten elements (Na, Al, Cr, Mn, Fe, Ni, Eu, W, Au, and Th) and 14 elements (Na, Al, K, Sc, Ti, Cr, Zn, Ga, Br, Sb, La, Eu, Ir, and Au) could be detected in the VACNTs and polyimide film, respectively. The VACNT data show that contamination by this material with respect to the Murchison meteorite is negligible in terms of the elemental ratios (e.g., Fe/Mn, Na/Al, and Mn/Cr) used for the classification of meteorites due to the extremely low density of VACNTs. However, for the Au/Cr ratio, even small degrees (1.7 wt%) of contamination by VACNTs will change the Au/Cr ratio. Elemental ratios used for the classification of meteorites are only influenced by large amounts of contamination (>60 wt%) of polyimide film, which is unlikely to occur. In contrast, detectable effects on Ti isotopic compositions are caused by >0.1 and >0.3 wt% contamination by VACNTs and polyimide film, respectively, and Hf isotopic changes are caused by >0.1 wt% contamination by VACNTs. The new sample holders (VACNTs and polyimide film) are suitable for chemical classification of Hayabusa2‐return samples, because of their ease of use, applicability to multiple analytical instruments, and low contamination levels for most elements.  相似文献   

Best practices for the use of meteorite names in publications     

Philipp R. Heck  Christopher Herd  Jeffrey N. Grossman  Dmitry Badjukov  Audrey Bouvier  Emma Bullock  Hasnaa Chennaoui‐Aoudjehane  Vinciane Debaille  Tasha L. Dunn  Denton S. Ebel  Ludovic Ferrire  Laurence Garvie  Jrme Gattacceca  Matthieu Gounelle  Richard Herd  Trevor Ireland  Emmanuel Jacquet  Robert J. Macke  Tim McCoy  Francis M. McCubbin  Takashi Mikouchi  Knut Metzler  Mathieu Roskosz  Caroline Smith  Meenakshi Wadhwa  Linda Welzenbach‐Fries  Toru Yada  Akira Yamaguchi  Ryan A. Zeigler  Michael Zolensky 《Meteoritics & planetary science》2019,54(7):1397-1400

  相似文献   

Cathodoluminescence of high-pressure feldspar minerals as a shock barometer          下载免费PDF全文

Masahiro Kayama  Toshimori Sekine  Naotaka Tomioka  Hirotsugu Nishido  Yukako Kato  Kiyotaka Ninagawa  Takamichi Kobayashi  Akira Yamaguchi 《Meteoritics & planetary science》2018,53(7):1476-1488

Cathodoluminescence (CL) analyses were carried out on maskelynite and lingunite in L6 chondrites of Tenham and Yamato-790729. Under CL microscopy, bright blue emission was observed in Na-lingunite in the shock veins. Dull blue-emitting maskelynite is adjacent to the shock veins, and aqua blue luminescent plagioclase lies farther away. CL spectroscopy of the Na-lingunite showed emission bands centered at ~330, 360–380, and ~590 nm. CL spectra of maskelynite consisted of emission bands at ~330 and ~380 nm. Only an emission band at 420 nm was recognized in crystalline plagioclase. Deconvolution of CL spectra from maskelynite successfully separated the UV–blue emission bands into Gaussian components at 3.88, 3.26, and 2.95 eV. For comparison, we prepared K-lingunite and experimentally shock-recovered feldspars at the known shock pressures of 11.1–41.2 GPa to measure CL spectra. Synthetic K-lingunite has similar UV–blue and characteristic yellow bands at ~550, ~660, ~720, ~750, and ~770 nm. The UV–blue emissions of shock-recovered feldspars and the diaplectic feldspar glasses show a good correlation between intensity and shock pressure after deconvolution. They may be assigned to pressure-induced defects in Si and Al octahedra and tetrahedra. The components at 3.88 and 3.26 eV were detectable in the lingunite, both of which may be caused by the defects in Si and Al octahedra, the same as maskelynite. CL of maskelynite and lingunite may be applicable to estimate shock pressure for feldspar-bearing meteorites, impactites, and samples returned by spacecraft mission, although we need to develop more as a reliable shock barometer.  相似文献   

Origin of a unique impact-melt rock—the L-chondrite Ramsdorf     

Akira YAMAGUCHI  Edward R. D. SCOTT  Klaus KEIL 《Meteoritics & planetary science》1999,34(1):49-59

Abstract— We have studied a unique impact-melt rock, the Ramsdorf L chondrite, using optical and scanning microscopy and electron microprobe analysis. Ramsdorf contains not only clast-poor impact melt (Begemann and Wlotzka, 1969) but also a chondritic portion (>60 g) with what appears at low magnification to be a normal, well-defined chondritic texture. However, detailed studies at high magnification show that >90 vol% of the crystals in the chondritic portion were largely melted by the impact: the chondrules lack normal microtextures and are ghosts of the original features. The only relics from the precursor chondrules are olivine crystals, which have the highest melting temperature (～1620 °C). Pyroxene-rich chondrules were so extensively melted that no phenocrysts were preserved and the melt crystallized in situ before significant mixing with exterior olivine-rich melts. Fine-grained pyroxene chondrule ghosts have sharper boundaries with the matrix than porphyritic olivine and pyroxene chondrule ghosts, probably because pyroxene-rich melts are significantly more viscous. Complex textures that formed by injection of melt along cracks and fractures in relic olivines suggest that the chondritic portion of Ramsdorf formed directly from petrologic type 3–4 material by strong shock. We infer that Ramsdorf was largely melted by shock pressures of ～75–90 GPa and that chondrule ghosts and relic olivine phenocrysts were locally preserved by rapid cooling. Quenching was not due to the addition of cold clasts into the melt but to heterogeneous shock heating that only caused internal melting of large olivines and pyroxenes. Ramsdorf appears to be one of the most heavily shocked meteorites that has retained some trace of its original texture.  相似文献   

Calibration and validation of the ocean color version-3 product from ADEOS OCTS     

Masanobu Shimada  Hiromi Oaku  Yasushi Mitomi  Hiroshi Murakami  Akira Mukaida  Yasuhisa Nakamura  Joji Ishizaka  Hiroshi Kawamura  Tasuku Tanaka  Motoaki Kishino  Hajime Fukushima 《Journal of Oceanography》1998,54(5):401-416

We present calibration and validation results of the OCTS’s ocean color version-3 product, which mainly consists of the chlorophyll-a concentration (Chl-a) and the normalized water-leaving radiance (_nL_w). First, OCTS was calibrated for the inter-detector sensitivity difference, offset, and absolute sensitivity using external calibration source. It was also vicariously calibrated using in-situ measurements for water (Chl-a and_nL_w) and atmosphere (optical thickness), which were acquired synchronously with OCTS under cloud-free conditions. Second, the product was validated using selected 17 in-situ Chl-a and 11 in-situ_nL_w measurements. We confirmed that Chl-a was estimated with an accuracy of 68% for Chl-a less than 2 mg/m³, and_nL_w from 94% (band 2) to 128% (band 4). Geometric accuracy was improved to 1.3 km. Stripes were significantly reduced by modifying the detector normalization factor as a function of input radiance.  相似文献   

Mechanisms of the southward translation of meddies     

Jun Takahashi  Akira Masuda 《Journal of Oceanography》1998,54(6):669-680

Meddies are warm and saline anticyclonic eddies found at the mid-depth of the Mediterranean Outflow in the Eastern North Atlantic. They are observed to move almost southward at average speeds as high as 1.3±0.2 cm s⁻¹. This paper examines a mechanism which accelerates this curious translation to a reasonable speed when combined with nonlinearity and a suitable vertical eddy structure. This mechanism is thepseudo-topographic β effect due to the westward decrease in the thickness of the mid-layer induced by the surface southward mean current. The linear dispersion relation including this effect is shown to account for a quarter of the surface southward mean current or a fifth of the observed southward translation of meddies. Three-layer quasi-geostrophic experiments reveal that the surface southward mean current certainly enhances the southward translation velocity of meddies to a speed in agreement with observation, if the meddy has a current structure of plausible intensity and vertical coherence. In the light of the current-induced pseudo-topographic β effect, previous hypotheses are also re-examined through dynamic arguments together with numerical experiments; they are suggested to have some difficulty either in dynamics or in correspondence with observation. Thus the nonlinear effect due to secondary eddies combined with thecurrent-induced pseudo-topographic β effect is the most likely mechanism responsible for the rapid southward translation of meddies among those examined in the paper.  相似文献   

Polymetallic Mineralization at the Shin-Ohtoyo Deposit, Harukayama District, Hokkaido, Japan     

Akira IMAI  Hiroharu MATSUEDA    Ryoichi YAMADA  Kenzo MASUTA 《Resource Geology》1999,49(2):75-88

Abstract: The Shin-Ohtoyo Cu–Au deposit is located in the Harukayama district, 20 km west of Sapporo, Hokkaido, Japan. Both acid-type disseminated and adularia–quartz–type vein Au mineralizations have been recognized within a small distance of less than 500 m in the district. Mineralogical characteristics of sulfide ores from the Shin-Ohtoyo deposit have been proved to be polymetallic. Ore minerals containing Sn, V, Bi and Te are recognized. Nine ore types are recognized in terms of characteristic mineral assemblage; (1) chalcedonic quartz veinlets in silicified zone around the deposit, (2) bismuthinite, emplectite, friedrichite and tetrahedrite, (3) an unnamed Cu–Sn–Fe–Zn sulfide, colusite-series minerals, stannoidite, emplectite and tetrahedrite, (4) bournonite, Se-bearing galena and tetrahedrite, (5) luzonite/famatinite and Ag-bearing tetrahedrite, (6) colusite-series minerals, emplectite, aikinite and tetrahedrite/goldfieldite, (7) luzonite/famatinite, colusite-series minerals, mawsonite and tetra–hedrite/goldfieldite, (8) enargite, luzonite/famatinite and tetrahedrite, and (9) colusite-series minerals and tetrahedrite. The first occurrence of friedrichite and stibiocolusite from Japan are reported. The chemical formula of the unnamed phase corresponds to Cu₆(Cu, Fe, Zn)Sn₃S₁₀. Sulfur isotopic ratios (δ³⁴S) of sulfides from the stockpile range from –0. 5% to +1. 9%, and those from drill cores recovered by Metal Mining Agency of Japan (MMAJ) vary from –2. 7% to +0. 8%. Sulfur isotopic ratio of barite in a cavity in the silicified tuff breccia collected from the stock pile yields +27. 1%, while that of barite collected from MMAJ core is +21. 7%. Sulfur isotopic thermometry applied for a pair of barite (+21. 7%) and associated pyrite (+1. 8%) indicates about 300°C. High–Te tetrahedrite composition from both the chalcedonic quartz vein in the silicified zone around the Shin-Ohtoyo deposit and the polymetallic sulfide ores from the adit of the deposit, suggests that the Au mineralization in the former is attributed to a hydrothermal system marginal to the polymetallic mineralization.  相似文献   

Preface     

Hiroyuki Tsubota  Masao Fukasawa  Koh Harada  Akira Nishimura  Masayuki Mac Takahashi  Shigeaki Aoki  Joji Ishizaka  Yutaka W. Watanabe 《Journal of Oceanography》1999,55(6):643-643

  相似文献   

Bottom pressure change associated with the 2004–2005 large meander of the Kuroshio south of Japan     

Akira Nagano  Takuya Hasegawa  Hiroyuki Matsumoto  Keisuke Ariyoshi 《Ocean Dynamics》2018,68(7):847-865

A large meander of the Kuroshio was generated in the region off the southern coast of Japan in August 2004 and continued until approximately July 2005. The formation and decay of the large-meander (LM) path was observed by bottom pressure (BP) sensors installed on inverted echo sounders (PIESs) and a seismic observing system off Shikoku. The variation in BP was examined focusing on the development, persistence, and decay of the LM path. The BP was found to be depressed associated with a Kuroshio path disturbance, called a small meander, and this BP depression led the sea surface height (SSH) depression by up to approximately two months. The temporal phase shift between the sea surface and deep disturbances was significantly greater than those of other small meanders that did not develop into large meanders. After the formation of the LM path, the BP beneath the Kuroshio increased with a lag of approximately two months behind the SSH elevation along with the upward displacement of the main thermocline. The increase in BP is associated with that of the positive southward BP gradient anomaly, i.e., the eastward deep Kuroshio current anomaly, which suggests an enhancement of the topographic steering and stability of the LM path. This is consistent with the fact that no small meanders occurred in the early LM period from late July 2004 to late January 2005.  相似文献   

A new occurrence of retrogressed eclogite from the Sanbagawa belt of southwest Japan and its significance     

Tomoki Taguchi  Shunsuke Endo  Yohei Igami  Akira Miyake 《Island Arc》2019,28(5)

The present paper reports, for the first time, the occurrence of an omphacite‐bearing mafic schist from the Asemi‐gawa region of the Sanbagawa belt (southwest Japan). The mafic schist occurs as thin layers within pelitic schist of the albite–biotite zone. Omphacite in the mafic schist only occurs as inclusions in garnet, and albite is the major Na phase in the matrix, suggesting that the mafic schist represents highly retrogressed eclogite. Garnet grains in the sample show prograde‐type compositional zoning with no textural or compositional break, and contain mineral inclusions of omphacite, quartz, glaucophane, barroisite/hornblende, epidote and titanite. In addition to the petrographic observations, Raman spectroscopy and focused ion beam system–transmission electron microscope analyses were used for identification of omphacite in the sample. The omphacite in the sample shows a strong Raman peak at 678 cm^?1, and concomitant Raman peaks are all consistent with those of the reference omphacite Raman spectrum. The selected area electron diffraction pattern of the omphacite is compatible with the common P2/n omphacite structure. Quartz inclusions in the mafic schist preserve high residual pressure values of Δω₁ > 8.5 cm^?1, corresponding to the eclogite facies conditions. The combination of Raman geothermobarometries and garnet–clinopyroxene geothermometry gives peak pressure–temperature (P–T) conditions of 1.7–2.0 GPa and 440–540 °C for the mafic schist. The peak P–T values are comparable to those of the schistose eclogitic rocks in other Sanbagawa eclogite units of Shikoku. These findings along with previous age constraints suggest that most of the Sanbagawa schistose eclogites and associated metasedimentary rocks share similar simple P–T histories along the Late Cretaceous subduction zone.  相似文献