Changes in the abundance and composition of picophytoplankton in relation to the occurrence of a Kyucho and a bottom intrusion in the Bungo Channel,Japan     

Miho Hirose  Toshiya Katano  Yuichi Hayami  Atsushi Kaneda  Takeshi Kohama  Hidetaka Takeoka  Shin-ichi Nakano 《Estuarine, Coastal and Shelf Science》2008

The Bungo Channel in southwestern Japan receives both warm, called Kyucho, and cold deep-water intrusions (bottom intrusion) from the Pacific Ocean. Abundances of Prochlorococcus, Synechococcus, and eukaryotic picophytoplankton were monitored from 18 July to 17 August 2001 to clarify whether advected picophytoplankton from the Pacific Ocean can grow in the channel or not. Synechococcus cells were further discriminated into low- and high-PUB types according to their fluorescence property in flow cytometry. From 18 to 25 July, the water temperature decreased by 3 °C at a 5-m depth at all stations, indicating the occurrence of a bottom intrusion. From 25 July to 4 August, a Kyucho occurred and the water temperature rapidly increased. From 4 to 17 August, a bottom intrusion and a Kyucho both occurred twice, although the intensities were smaller than those occurring until 4 August. From 18 to 30 July, the abundance of both Prochlorococcus and a high-PUB type of Synechococcus drastically decreased because of a bottom intrusion; however, the abundances rapidly increased due to the advection by a Kyucho. These advected cells increased from 4 to 17 August in the channel and Kitanada Bay. Changes in the abundance of low-PUB type of Synechococcus and eukaryotic picophytoplankton were less noticeable than those in the abundance of Prochlorococcus and high-PUB type. The present study demonstrated that oceanic picophytoplankton advected by the Kyucho could grow in the channel. However, abundances of low-PUB type and eukaryotic picophytoplankton increased higher than those of Prochlorococcus and high-PUB type did. Thus, these oceanic phytoplankters will be excluded when Kyucho does not occur for a long time. The co-occurrence of various types of picophytoplankton found in the channel is probably achieved by both Kyucho event and their growth capability in the channel.  相似文献   

Laboratory Enrichment of Radioactive Assemblages and Estimation of Thorium and Uranium Radioactivity in Fractions Separated from Placer Sands in Southeast Bangladesh     

Takayuki Sasaki  Mohammad Rajib  Masafumi Akiyoshi  Taishi Kobayashi  Ikuji Takagi  Toshiyuki Fujii  Md. Mashrur Zaman 《Natural Resources Research》2015,24(2):209-220

  相似文献   

SNR Surface Density Distribution in Nearby Galaxies     

Manami Sasaki  Dieter Breitschwerdt  Rodrigo Supper 《Astrophysics and Space Science》2004,289(3-4):283-286

Since supernova remnants (SNRs) are believed to be the primary sources of Galactic cosmic rays (CRs), their distribution in galaxies is an important basis for modelling and understanding the distribution of the CRs and their γ-ray spectrum. We analysed the radial surface density of X-ray and radio selected SNRs in the Large Magellanic Cloud (LMC) and M 33. Both in X-rays and in radio, the surface densities of the SNRs are in excellent agreement in both galaxies, showing an exponential decay in radius. The results were compared to the SNR distribution in the spiral galaxies M 31 and NGC 6946 as well. The radial scale length of the distribution is $\frac{1} {4} $ ? $\frac{1} {3} $ of the radius of the galaxies, fully consistent with values derived for the Milky Way, the LMC, and M 33. Therefore, not only the radio SNRs, but also the X-ray detected SNR sample can be interpreted to be representative for the CR sources within a galaxy.  相似文献   

A survey of possible impact structures on 25143 Itokawa     

Naru Hirata  Olivier S. Barnouin-Jha  Chikatoshi Honda  Ryosuke Nakamura  Hideaki Miyamoto  Sho Sasaki  Hirohide Demura  Akiko M. Nakamura  Tatsuhiro Michikami  Robert W. Gaskell  Jun Saito 《Icarus》2009,200(2):486-502

We determined the morphologies and dimensions of possible impact craters on the surface of Asteroid 25143 Itokawa from images taken by the Hayabusa spacecraft. Circular depressions, circular features with flat floors or convex floors, and circular features with smooth surfaces were identified as possible craters. The survey identified 38 candidates with widely varying morphologies including rough, smooth and saddle-shaped floors, a lack of raised rims and fresh material exposures. The average depth/diameter ratio was 0.08±0.03: these craters are very shallow relative to craters observed on other asteroids. These shallow craters are a result of (1) target curvature influencing the cratering process, (2) raised rim not being generated by this process, and (3) fines infilling the craters. As many of the crater candidates have an unusual appearance, we used a classification scheme that reflects the likelihood of an observed candidate's formation by a hypervelocity impact. We considered a variety of alternative interpretations while developing this scheme, including inherited features from a proto-Itokawa, spall scars created by the disruption of the proto-Itokawa, spall scars following the formation of a large crater on Itokawa itself, and apparent depressions due to random arrangements of boulders. The size-frequency distribution of the crater candidates was close to the empirical saturation line at the largest diameter, and then decline with decreasing diameter.  相似文献   

Investigation on piezoelectric lead zirconate titanate detector bombarded obliquely with hypervelocity iron particles     

S. Takechi  T. Onishi  T. Miyachi  N. Hasebe  K. Nogami  S. Sasaki  T. Iwai  R. Srama 《Planetary and Space Science》2008,56(9):1309-1313

A cosmic dust detector for use onboard a satellite is currently being constructed from piezoelectric lead zirconate titanate (PZT). The characteristics of the PZT detector were studied by bombarding it with hypervelocity iron particles, which were supplied by a Van de Graaff accelerator. There was a linear relationship between the rise time of the signal observed from the detector and the particle's velocity, which was above 10 km/s on impact. It was also found that the rise time was almost independent of the collisional angle between the particles and the PZT surface within the limits of the particle's parameters used in this experiment.  相似文献   

The anisotropy of cosmic ray arrival directions around 10 eV     

N. Hayashida  M. Nagano  D. Nishikawa  H. Ohoka  N. Sakaki  M. Sasaki  M. Takeda  M. Teshima  R. Torii  T. Yamamoto  S. Yoshida  K. Honda  N. Kawasumi  I. Tsushima  N. Inoue  E. Kusano  K. Shinozaki  N. Souma  K. Kadota  F. Kakimoto  K. Kamata  S. Kawaguchi  Y. Kawasaki  H. Kitamura  Y. Matsubara  K. Murakami  Y. Uchihori  H. Yoshii 《Astroparticle Physics》1999,10(4):125-311

Anisotropy in the arrival directions of cosmic rays with energies above 10¹⁷ eV is studied using data from the Akeno 20 km² array and the Akeno Giant Air Shower Array (AGASA), using a total of about 114 000 showers observed over 11 years. In the first harmonic analysis, we have found a strong anisotropy of 4% around 10¹⁸ eV, corresponding to a chance probability of 0.2% after taking the number of independent trials into account. with two-dimensional analysis in right ascension and declination, this anisotropy is interpreted as an excess of showers near the directions of the Galactic Center and the Cygnus region.  相似文献   

Analysis of primary production in the Seto Inland Sea, Japan, using a simple ecosystem model     

Toshiya Hashimoto  Hidetaka Takeoka 《Journal of Oceanography》1998,54(2):123-132

A simple model of lower trophic level ecosystem has been created to analyze possible environmental control of primary production in eight sub-areas of the Seto Inland Sea. The primary production rates observed by Hashimotoet al. (1997a) in these sub-areas are well reproduced by the model, including horizontal processes such as horizontal transport of nutrients and vertical processes such as vertical mixing, light intensity and sinking of particulate matter. Without taking account of horizontal processes the model also successfully reproduces the observed primary production rates in some areas, but if fails to reproduce those in the others. This shows that the relative importance of the horizontal transport on the primary production differs are by area. Two time scales,T _z andT _H, are introduced to explain this difference.T _z is a vertical cycling time of material, which is defined as the time during which the stock of the material in the water column is utilized for primary production;T _H is the horizontal transit time of the material. The relative importance of the horizontal process is well explained by theT _H/T _z ratio; that is, the horizontal transport process is important in the areas where this ratio is small. Further the possible mechanisms of nutrient supply for the primary production in each sub-area are investigated using this model.  相似文献   

Response of hybrid isolation system during a shake table experiment of a full‐scale isolated building          下载免费PDF全文

Keri L. Ryan  Taichiro Okazaki  Camila B. Coria  Eiji Sato  Tomohiro Sasaki 《地震工程与结构动力学》2018,47(11):2214-2232

A full‐scale 5‐story steel moment frame building was subjected to a series of earthquake excitations using the E‐Defense shake table in August, 2011. For one of the test configurations, the building was seismically isolated by a hybrid system of lead‐rubber bearings and low friction roller bearings known as cross‐linear bearings, and was designed for a very rare 100 000‐year return period earthquake at a Central and Eastern US soil site. The building was subject to 15 trials including sinusoidal input, recorded motions and simulated earthquakes, 2D and 3D input, and a range of intensities including some beyond the design basis level. The experimental program was one of the first system‐level full‐scale validations of seismic isolation and the first known full‐scale experiment of a hybrid isolation system incorporating lead‐rubber and low friction bearings. Stable response of the hybrid isolation system was demonstrated at displacement demands up to 550 mm and shear strain in excess of 200%. Torsional amplifications were within the new factor stipulated by the code provisions. Axial force was observed to transfer from the lead‐rubber bearings to the cross‐linear bearings at large displacements, and the force transfer at large displacements exceeded that predicted by basic calculations. The force transfer occurred primarily because of the flexural rigidity of the base diaphragm and the larger vertical stiffness of the cross‐linear bearings relative to the lead‐rubber bearings.  相似文献   

http://dx.doi.org/10.1016/j.gsf.2016.04.002   总被引：1，自引：1，他引：0  

Takanori Sasaki  Toshikazu Ebisuzaki 《地学前缘(英文版)》2017,8(2):215-222

Population synthesis studies into planet formation have suggested that distributions consistent with observations can only be reproduced if the actual Type Ⅰ migration timescale is at least an order of magnitude longer than that deduced from linear theories.Although past studies considered the effect of the Type I migration of protoplanetary embryos,in most cases they used a conventional formula based on static torques in isothermal disks,and employed a reduction factor to account for uncertainty in the mechanism details.However,in addition to static torques,a migrating planet experiences dynamic torques that are proportional to the migration rate.These dynamic torques can impact on planet migration and predicted planetary populations.In this study,we derived a new torque formula for Type Ⅰ migration by taking into account dynamic corrections.This formula was used to perform population synthesis simulations with and without the effect of dynamic torques.In many cases,inward migration was slowed significantly by the dynamic effects.For the static torque case,gas giant formation was effectively suppressed by Type I migration;however,when dynamic effects were considered,a substantial fraction of cores survived and grew into gas giants.  相似文献   

Subsidence of the Miyako‐Sone submarine carbonate platform,east of Miyako‐jima Island,northwestern Pacific Ocean     

Kohsaku Arai  Hideaki Machiyama  Shun Chiyonobu  Hiroki Matsuda  Keiichi Sasaki  Marc Humblet  Yasufumi Iryu 《Island Arc》2014,23(1):1-15

Bathymetric mapping and observations of the seafloor using a remotely operated vehicle (ROV, Hyper‐Dolphin 3K) were carried out on the slopes of the Miyako‐Sone submarine platform, east of Miyako‐jima in the Ryukyu Islands, northwestern Pacific Ocean. The bathymetric map indicates that terraces are present at water depths of approximately 140 m, 330 m, 400 m, and 680 m on the northwestern slope of the platform. A number of NW–SE trending lineaments, probably faults, extend perpendicular to the axis of the Ryukyu Island Arc. Two ROV surveys were conducted at water depths ranging from 519 m (on the slope) to 121 m (shallowest part of the platform). The surveys revealed that well‐indurated carbonate rocks are exposed at terrace margins and on upper slopes, and that the lower slopes are covered with modern sediments consisting of unconsolidated, coarse‐sand‐sized bioclastic carbonates. Calcareous nannofossils from the well‐indurated carbonate rocks indicate a Middle–Late Pleistocene age, which suggests that the rocks correlate with the Quaternary reef and fore‐reef deposits of the Ryukyu Group (Ryukyu Limestone) on the Ryukyu Islands. No siliciclastic deposits corresponding to the upper Miocene–lower Pleistocene Shimajiri Group (as exposed on Okinawa‐jima and Miyako‐jima islands) were recovered during the surveys. Coeval well‐indurated carbonate rocks, all of which formed in a similar sedimentary environment, have been downthrown towards the west due to displacements on the western sides of normal faults. Subsidence of the Miyako‐Sone submarine platform was the result of large vertical displacements on such normal faults. The timing of initial subsidence cannot be tightly constrained, but the presence of the youngest limestone at progressively lower levels towards the west suggests the subsidence continued until after 0.265 Ma.  相似文献