The Haji Abad intrusion is a well-exposed Middle Eocene I-type granodioritc pluton in the Urumieh–Dokhtar magmatic assemblage (UDMA). The major constituents of the investigated rocks are K-feldspar, quartz, plagioclase, pyroxene, and minor Fe–Ti oxide and hornblende. The plagioclase compositions fall in the labradorite, andesine, and oligoclase fields. The amphiboles range in composition from magnesio-hornblende to tremolite–hornblende of the calcic-amphibole group. Most pyroxenes principally plot in the field of diopside. The calculated average pressure of emplacement is 1.9 kbar for the granodioritic rocks, crystallizing at depths of about 6.7 km. The highest pressure estimated from clinopyroxene geobarometry (5 kbar) reflects initial pyroxene crystallization pressure, indicating initial crystallization depth (17.5 km) in the Haji Abad granodiorite. The estimated temperatures using two-feldspar thermometry give an average 724 °C. The calculated average temperature for clinopyroxene crystallization is 1090 °C. The pyroxene temperatures are higher than the estimated temperature by feldspar thermometry, indicating that the pyroxene and feldspar temperatures represent the first and late stages of magmatic crystallization of Haji Abad granodiorite, respectively. Most pyroxenes plot above the line of Fe3+?=?0, indicating they crystallized under relatively high oxygen fugacity or oxidized conditions. Furthermore, the results show that the Middle Eocene granitoids crystallized from magmas with H2O content about 3.2 wt%. The relatively high water content is consistent with the generation environment of HAG rocks in an active continental margin and has allowed the magma to reach shallower crustal levels. The MMEs with ellipsoidal and spherical shapes show igneous microgranular textures and chilled margins, probably indicating the presence of magma mixing. Besides, core to rim compositional oscillations (An and FeO) for the plagioclase crystals serve as robust evidence to support magma mixing. The studied amphiboles and pyroxenes are grouped in the subalkaline fields that are consistent with crystallization from I-type calc-alkaine magma in the subduction environment related to active continental margin. Mineral chemistry data indicate that Haji Abad granodiorites were generated in an orogenic belt related to the volcanic arc setting consistent with the subduction of Neo-Tethyan oceanic crust beneath the central Iranian microcontinent. 相似文献
Afyonkarahisar is a very important geothermal province of western Anatolia and has low and medium enthalpy geothermal areas. This study has been carried out for the preparation of distribution maps of soil gases (radon and carbon dioxide) and shallow soil temperature and the exploration of permeable tectonic regions associated with geothermal systems and reveal the origins of radon and carbon dioxide gases. The western district of the study area is characterized by the high radon concentration (168.30 kBq/m3), carbon dioxide ratio (0.30%), and soil temperature (21.0 °C) values. Fethibey and Demirçevre faults, which allow the circulation of geothermal fluids, have been detected in the distribution maps of radon, carbon dioxide, and shallow depth temperature and the directions of the curves in these maps correspond to the strikes of Demirçevre faults. The effect of the fault plays an important role in the change of carbon dioxide concentration along the W-E directional geological section prepared to determine the change of soil gas and shallow depth temperature values depending on lithological differences, fault existence, and geothermal reservoir depth. On the other hand, it was determined that Rn222 concentration and soil temperature changed as a function of geothermal reservoir depth or lithological difference. Tuffs in Köprülü volcano-sedimentary units are the main source of radon due to their higher uranium contents. Besides, the carbon dioxide in Ömer–Gecek soils has geothermal origin because of the highest carbon dioxide content (99.3%) in non-condense gas. The similarities in patterns of soil temperature, radon, and carbon dioxide indicate that the variation in soil temperatures is related to radon and carbon dioxide emissions. It is concluded that soil gas and temperature measurements can be used to determine the active faults in the initial stage of geothermal exploration successfully. 相似文献
Basalt is an extrusive igneous rock derived from Lava and spread over different localities in Jordan. It can be used in industrial applications, and as construction materials. Before using basalt, it is essential to determine its dry density, porosity, uniaxial compressive strength, and Brazilian tensile strength. The testing procedure and sample preparation used to determine the engineering properties are time-consuming and need expertise. Hence, the ultrasonic pulse velocity (UPV) test, a quick and non-destructive evaluation method, was used to determine the engineering properties. Empirical relationships for determination of dry density, porosity, uniaxial compressive strength, Brazilian tensile strength, and tangent modulus of elasticity were deduced. Good correlation coefficients (R2?=?0.832–0.929) were obtained between UPV and dry density, porosity, uniaxial compressive strength, Brazilian tensile strength and modulus of elasticity. These correlations were limited to intact basalt with UPV?≥?4000 m/s. 相似文献
To measure grout penetrability in fractured hard rock, various measuring instruments have been developed over the years. Penetrability meter and Filter pump have been designed to use in both the lab and the field. Short slot has been applicable mainly in the lab due to its complexity. The fact, that these instruments have been built based on different assumptions, limitations, and test conditions, makes their results occasionally in contradict. Deficiency in design of the instruments as well as the methods of evaluating grout penetrability is additionally a basis for uncertainty in results. This study is an experimental effort to determine and thoroughly perceive the nature of the most governing uncertainties in grout penetrability measurements. The test apparatus, procedure, and method used to evaluate the grout penetrability in both Penetrability meter and Filter pump were thus modified. The aim was to control the corresponding uncertainties and make their limitations and test conditions as similar as possible with the ones in Short slot. The results suggested that to obtain a more realistic evaluation of the grout penetrability, measurement should be accomplished at both the high and the low pressures with sufficient grout volume using Short slot. Moreover, application of both Filter pump and Penetrability meter is no longer recommended due to the revealed uncertainties. 相似文献
One of the challenges of remote sensing and computer vision lies in the three-dimensional (3-D) reconstruction of individual trees by using automated methods through very high-resolution (VHR) data sets. However, a successful and complete 3-D reconstruction relies on precise delineation of the trees in two dimensions. In this paper, we present an original approach to detect and delineate citrus trees using unmanned aerial vehicles based on photogrammetric digital surface models (DSMs). The symmetry of the citrus trees in a DSM is handled by an orientation-based radial symmetry transform which is computed in a unique way. Next, we propose an efficient strategy to accurately build influence regions of each tree, and then we delineate individual citrus trees through active contours by taking into account the influence region of each canopy. We also present two efficient strategies to filter out erroneously detected canopy regions without having any height thresholds. Experiments are carried out on eight test DSMs composed of different types of citrus orchards with varying densities and canopy sizes. Extensive comparisons to the state-of-the-art approaches reveal that our proposed approach provides superior detection and delineation performances through supporting a nice balance between precision and recall measures. 相似文献
Natural Hazards - Despite the controversy regarding their use, school buildings are often assigned as emergency evacuation shelters, temporary accommodation and aid distribution hubs following... 相似文献
Natural Hazards - The Karakoram Highway links north Pakistan with southwest China. It passes through unique geomorphological, geological and tectonic setting. This study focused 200-km-long section... 相似文献
A 6.8-magnitude earthquake that occurred on January 24, 2020, has been effective in Turkey’s eastern regions. The earthquake, with recorded peak ground acceleration (PGA) value of 0.292 g, caused the destruction or heavy damage of buildings, especially in the city center of Elaz?? province. The purpose of this paper was to share the results of detailed investigation in the earthquake-stricken area. Additionally, the causes of damages and failures observed in the buildings were compared to those that had occurred in previous earthquakes in Turkey. In this study, the damages observed in especially RC buildings as well as in masonry and rural buildings were summarized, the lessons learned were evaluated, and the results were interpreted with reference to Turkish earthquake codes. In the study, it was particularly emphasized why the building stock underwent such damage even though the buildings were exposed to earthquake acceleration well below the design acceleration values.
Stability is the main problem in underground excavations that can result in rock-related accidents or closure of mines. This is often controlled by the geological condition of the rockmass and the in situ stress field where excavation is being carried out. Over the years, conventional support systems such as bolts, shotcrete and mesh have been the standard support systems used in difficult ground conditions to maintain stability of underground openings. The novel Thin Spray Liner (TSL) is a technology with an improvement in terms of support capabilities for difficult geological conditions. This technology is predicted to replace conventional support systems, as it offers a significant yielding capacity that is better than that of the traditional techniques of controlling strata. The performance of the TSL lies between that of shotcrete and wire mesh. The TSL has numerous advantages regarding rock reinforcement such as rapid curing period, fast application, high tensile strength, high adhesion properties that prevent movement of rock keyblocks, improved cycle times, reduction in material-handling compared to shotcrete, and a significant ability to penetrate joints. These advantages increase the allowance for mechanisation and improvement of safety in excavations. Despite various benefits of TSLs, there are shortcomings which make end-users to be sceptical about the technology. This study provides a detailed review of the mechanism, properties, composition and types, as well as the general and mining applications of TSLs. It also describes the challenges faced by the mining industry and other end-users in accepting the technology as a solution for stability issues in underground openings. In addition, some insightful suggestions are made as recommendations for future work on the development of suitable, effective and efficient thin surface rock support technology within limitations/constraints.
