An experimental study of the grain-scale processes of peridotite melting: implications for major and trace element distribution during equilibrium and disequilibrium melting   总被引：1，自引：0，他引：1  

Mauro Lo Cascio  Yan Liang  Nobumichi Shimizu  Paul C. Hess 《Contributions to Mineralogy and Petrology》2008,156(1):87-102

The grain-scale processes of peridotite melting were examined at 1,340°C and 1.5 GPa using reaction couples formed by juxtaposing pre-synthesized clinopyroxenite against pre-synthesized orthopyroxenite or harzburgite in graphite and platinum-lined molybdenum capsules. Reaction between the clinopyroxene and orthopyroxene-rich aggregates produces a melt-enriched, orthopyroxene-free, olivine + clinopyroxene reactive boundary layer. Major and trace element abundance in clinopyroxene vary systematically across the reactive boundary layer with compositional trends similar to the published clinopyroxene core-to-rim compositional variations in the bulk lherzolite partial melting studies conducted at similar P–T conditions. The growth of the reactive boundary layer takes place at the expense of the orthopyroxenite or harzburgite and is consistent with grain-scale processes that involve dissolution, precipitation, reprecipitation, and diffusive exchange between the interstitial melt and surrounding crystals. An important consequence of dissolution–reprecipitation during crystal-melt interaction is the dramatic decrease in diffusive reequilibration time between coexisting minerals and melt. This effect is especially important for high charged, slow diffusing cations during peridotite melting and melt-rock reaction. Apparent clinopyroxene-melt partition coefficients for REE, Sr, Y, Ti, and Zr, measured from reprecipitated clinopyroxene and coexisting melt in the reactive boundary layer, approach their equilibrium values reported in the literature. Disequilibrium melting models based on volume diffusion in solid limited mechanism are likely to significantly underestimate the rates at which major and trace elements in residual minerals reequilibrate with their surrounding melt. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

Simple models for dynamic melting in an upwelling heterogeneous mantle column: Analytical solutions     

Yan Liang 《Geochimica et cosmochimica acta》2008,72(15):3804-3821

Several lines of evidence suggest that the melt generation and segregation regions of the mantle are heterogeneous, consisting of chemically and lithologically distinct domains of variable size and dimension. Partial melting of such heterogeneous mantle source regions gives rise to a diverse range of basaltic magmas. In order to better assess the role of source heterogeneity during mantle melting, we have undertaken a theoretical study of trace element distribution and fractionation during concurrent melting and melt migration in an upwelling, chemically heterogeneous, two-porosity double lithology melting column. Analytical solutions for the abundance of a trace element in the matrix and channel were obtained under the assumptions that the porosity, melt and solid velocities, and solid-melt partition coefficients are constant and uniform. For simplicity, we neglected diffusion and dispersion in the melt. Chemical source heterogeneities of arbitrary size and shape were integrated into the simple melting models by allowing trace element abundance in the source region to vary as a function of time and space. Concurrent melting and melt migration in an upwelling heterogeneous mantle may be approximated as a quasi-steady state problem in which time-dependent concentration patterns produced by melting of heterogeneous source regions are superimposed on a reference steady-state concentration distribution established by melting of the ambient or background mantle. Chromatographic fractionation is especially important for the matrix melt and solid when chemical heterogeneities are involved during melting and melt migration in the mantle, giving rise to significant phase-shift between two incompatible trace elements in the matrix melt and scattered correlations among incompatible trace elements in residual peridotites. Mixing is the chief mass transfer process in the dunite channel where the chromatographic effect is negligible for most of the incompatible trace elements. The lack of chromatographic fractionation among incompatible trace elements and isotopic ratios in MORB suggests either most MORB are channel melts or mixing in magma conduit and chamber is very efficient such that the phase-shift is averaged out during magma transport and storage processes. Advection brings melt produced by smaller-degree of melting in the deeper part of the melting column to the overlying melting region, increasing the incompatible trace element abundance in the matrix and the channel. This advection-induced self-enrichment is especially important when heterogeneous sources are involved and may account for some of the enriched incompatible trace element patterns observed in residual peridotite that were previously interpreted to be a result of mantle metasomatism. Systematic studies of high-resolution spatially correlated mantle samples may help to constrain the melting history and the size and nature of chemical heterogeneities in the mantle.  相似文献   

Considerations for conducting incubations to study the mechanisms of As release in reducing groundwater aquifers     

Kathleen A. Radloff  Anya R. Manning  Brian Mailloux  Yan Zheng  M. Moshiur Rahman  M. Rezaul Huq  Kazi M. Ahmed  Alexander van Geen 《Applied Geochemistry》2008

Microbial Fe reduction is widely believed to be the primary mechanism of As release from aquifer sands in Bangladesh, but alternative explanations have been proposed. Long-term incubation studies using natural aquifer material are one way to address such divergent views. This study addresses two issues related to this approach: (1) the need for suitable abiotic controls and (2) the spatial variability of the composition of aquifer sands. Four sterilization techniques were examined using orange-colored Pleistocene sediment from Bangladesh and artificial groundwater over 8 months. Acetate (10 mM) was added to sacrificial vials before sterilization using either (1) 25 kGy of gamma irradiation, (2) three 1-h autoclave cycles, (3) a single addition of an antibiotic mixture at 1× or (4) 10× the typical dose, and (5) a 10 mM addition of azide. The effectiveness of sterilization was evaluated using two indicators of microbial Fe reduction, changes in diffuse spectral reflectance and leachable Fe(II)/Fe ratios, as well as changes in P-extractable As concentrations in the solid phase. A low dose of antibiotics was ineffective after 70 days, whereas autoclaving significantly altered groundwater composition. Gamma irradiation, a high dose of antibiotics, and azide were effective for the duration of the experiment.  相似文献   

针式微萃取结合GC-IRMS测定水溶液中甲酸、乙酸的稳定碳同位素组成     

李心清  黄代宽  章炎麟  江伟  安宁  胡璐  徐刚 《地球化学》2008,37(6)

甲酸和乙酸稳定碳同位素组成（δ^13C）的分析对环境、食品、制药和自然产品等的研究具有重要的应用价值。但目前尚缺乏有效的测定方法。本研究利用最近出现的针式固相微萃取技术（NeedlEX）,以吹扫．捕集方式对水溶液中的有机酸进行了萃取,然后利用气相色谱．同位素比值质谱联用仪（GC—IRMS）对所萃取的有机酸分子进行了占δ^13C的测定。结果显示,质谱计的信号强度与水溶液中有机酸的浓度存在显著的线性相关关系（R^2〉0．99,P〈0．05）,表明Needl EX对水溶液中有机酸具有稳定的萃取能力。在甲酸与乙酸含量分别不低于300μg／mL与200μg／mL的水溶液中,1000mL的吹扫体积可以使两者δ^13C多次分析结果的相对误差分别保持在3％和1％左右,且整个实验流程没有造成可检测的碳同位素分馏作用。低于这两个浓度界线,则分析误差随浓度的降低迅速增加。本研究虽然是针对水溶液中有机酸δ^13C的测定,其萃取方法对其他水溶性挥发和半挥发有机物δ^13C的分析也同样具有应用价值。  相似文献   

CO2地质埋存渗漏风险及补救对策   总被引：7，自引：1，他引：6  

许志刚  陈代钊  曾荣树 《地质论评》2008,54(3):373-386

目前,将CO2埋存于地下深部地质构造（如油气藏、煤层、地下含水层及岩溶盐腔）的减排方案能有效地减缓温室效应而备受关注。无论什么储集体,我们都希望CO2在地下埋存的时间越长越好。然而,对于一项具体工程的实施,必然存在一些客观和主观因素造成CO2渗漏,比如废弃井的不完善或不合理处理、地层断裂系统和水动力系统以及地震所造成的渗漏等等。存在渗漏就可能会对周围人和生态环境造成危害。因此,进行CO2地质埋存的风险评估是相当有必要的,是我们能长期有效安全地进行该项减排方案必不可少的基础和保证。本文即想从建立一套完整的风险评估、管理和监测体系的角度并以加拿大Weyburn油田为例,深入分析CO2地质埋存中可能存在的渗漏风险和途径,建立CO2渗漏风险评估机制,并针对具体的渗漏可能性提出相应的补救对策,为全球范围内,尤其对我国刚刚开展CO2地质埋存研究工作提供一些有益的思路。  相似文献   

利用MC-ICPMS对水样中硼同位素比值的测定   总被引：2，自引：0，他引：2  

吕苑苑  许荣华  赵平  谢烈文  李禾 《地球化学》2008,37(1):1-8

采用Amberlite IRA-743硼特效树脂进行水溶液中硼的分离,对洗脱液温度、体积以及树脂动态交换容量等进行了实验.它的动态交换容量为4.2 mg/g,在室温条件下,用5 mL 2%HNO3可定量从树脂柱上洗脱被吸附的硼.采用Neptune型MC-ICPMS进行硼同位素组成的测定,1 μg/g浓度的硼标准溶液获得放大的信号强度约为0.7V,硼的化学分离过程有效避免了质量歧视效应.实验结果表明,MC-ICPMS对硼存在严重的记忆效应,通过采用5%HNO3-(1%HNO3 0.1%HF)-H2O-20%NH3H2O-H2O的交替清洗方法,可在约1 h内消除硼的记忆效应.在最佳仪器条件下,对含有250 ng硼的水样,可以快速测定硼的同位素组成,占δ11B测定的绝对偏差为0.4‰-0.5‰(SD).  相似文献   

邹平王家庄铜矿床成矿地球化学及成因探讨   总被引：2，自引：0，他引：2  

张军  徐兆文  李海勇  刘苏明  杨小男  陆现彩  李红超 《地质论评》2008,54(4):466-476

王家庄铜矿床的矿化脉石英中流体包裹体均一温度介于116 ~ 566 ℃之间,均值为 289 ℃;盐度介于7.2%～63.2% NaCleq,均值为21.1% NaCleq。流体的气相成分主要为H2O和CO2。在均一温度为240 ~ 440 ℃区间内,出现了富气相的两相水溶液包裹体、富液相的两相水溶液包裹体和含子晶的三相水溶液包裹体共存现象,以及加温后富气相包裹体均一到气相和同期富液相包裹体均一到液相的特征,表明成矿流体曾发生过沸腾作用;其中第一次发生于360 ~ 400 ℃,主要形成高温、高盐度含子晶的三相水溶液包裹体和高温、中盐度富液相的两相水溶液包裹体及高温、低盐度富气相的两相水溶液包裹体;第二次发生于240 ~ 320 ℃,主要形成高—中温、高盐度的含子晶的三相水溶液包裹体和高—中温、中盐度富液相的两相水溶液包裹体及高—中温、低盐度富气相的两相水溶液包裹体;之后主要形成富液相的两相水溶液包裹体,具有中低温和中盐度的特征。矿化脉石英中的δ18OH2O介于-1.14‰ ~ 1.79‰之间,均值为0.94‰;δD介于-63.70‰ ~ -56.50‰之间,均值为-59.8‰;说明王家庄铜矿床的成矿流体主要来源于岩浆,后期混入大气降水。矿石矿物的δ34S变化于-8.80‰ ~ -2.80‰之间,均值为-6.33‰。矿石矿物的n(206Pb)/n(204Pb)介于18.1684 ~ 18.3637之间,均值为18.2892;n(207Pb)/n(204Pb)介于155546 ~ 156342之间,均值为155777;n(208Pb)/n(204Pb)介于38.1286 ~ 38.4840之间,均值为38.2780。说明矿石具有贫重硫和富放射性成因铅的特征,硫、铅主要来源于深部,后期可能受到地壳物质或大气降水的混染。  相似文献   

西藏马攸木金矿床金银互化物的赋存状态   总被引：3，自引：0，他引：3  

孙燕  温春齐  多吉  霍艳 《地质与勘探》2008,44(5):42-46

马攸木金矿床是西藏近年发现的首例规模较大、矿石品位富、金成色高的岩金矿床.作者通过对马攸木金矿床矿石组构、矿石共生组合及矿物特征研究发现,金银互化物主要有自然金、含银自然金、银金矿、自然银.载金矿物为黝铜矿、针铁矿、脆硫锑铅矿及石英;金银互化物的赋存形式主要为包裹体金、裂隙金及粒间金.金银互化物的形成、富集与热液成矿作用及表生风化作用关系密切.  相似文献   

喜马拉雅山脉的地质地貌特征:来自SRTM数字高程模型和降水量数据的约束   总被引：3，自引：1，他引：2       下载免费PDF全文

王猛  刘焰  何延波  魏东 《地质科学》2008,43(3):603-622

利用GTOPO30和SRTM3数字高程(DEM)数据,提取了喜马拉雅山脉(造山带)的数字高程模型并对其进行了地质地貌的初步分析。从SRTM3数字高程数据提取出坡度数据,初步分析了喜马拉雅山脉坡度和高程的特征。数字高程和坡度图清楚地展现了喜马拉雅大型断裂带(构造边界)的空间分布特征。分析了中国气象局下属的西藏、青海、四川和云南4省区气象观测台站55年来的年平均降水量观测数据、喜马拉雅山脉南坡的年平均降水量数据、喜马拉雅DEM和裂变径迹数据,发现喜马拉雅山脉从东至西,年平均降水量逐渐减少,地形起伏逐渐变小,而高程渐次升高,与此同时剥蚀速率降低;从北至南,年平均降水量逐渐增加,地形起伏增大,高程快速降低,而剥蚀速率则急剧升高。这充分说明了喜马拉雅年平均降水量大的地区,地表剥蚀作用相对较强,年平均降水量小的地区,地表剥蚀作用则较弱,即:在喜马拉雅地区,长周期的地表剥蚀过程(可长达数个百万年时间尺度)和短周期(仅仅50年)的降水量观测是耦合的。  相似文献   

冻融循环对塑料土工格栅拉伸性能的影响     

汪恩良  徐学燕  常俊德  钟华  高占坤 《冰川冻土》2008,30(4)

在-25～ 25 ℃环境温度条件下, 采用水中冻融和空气中冻融两种方式, 经过50次冻融循环后, 在15 ℃、 0 ℃、 -10 ℃、 -20 ℃和-35 ℃工况下对土工格栅试样进行了拉伸性能的试验研究, 获得了聚乙烯塑料土工格栅的极限承载力、最大延伸率、 不同延伸率对应的应力值等数据. 试验结果表明, 聚乙烯塑料土工格栅在低温时抗拉性能明显提高, 从 15 ℃降至-35 ℃时, 5%延伸率对应的抗拉强度提高107%, 极限承载力提高19%. 同时, 聚乙烯塑料土工格栅极限延伸率随温度降低呈线形关系降低, 从 15 ℃降至-35 ℃时, 极限延伸率降低80%.  相似文献