The Doppler orbitography and radiopositioning integrated by satellite (DORIS) system was originally developed for precise orbit determination of low Earth orbiting (LEO) satellites. Beyond that, it is highly qualified for modeling the distribution of electrons within the Earth’s ionosphere. It measures with two frequencies in L-band with a relative frequency ratio close to 5. Since the terrestrial ground beacons are distributed quite homogeneously and several LEOs are equipped with modern receivers, a good applicability for global vertical total electron content (VTEC) modeling can be expected. This paper investigates the capability of DORIS dual-frequency phase observations for deriving VTEC and the contribution of these data to global VTEC modeling. The DORIS preprocessing is performed similar to commonly used global navigation satellite systems (GNSS) preprocessing. However, the absolute DORIS VTEC level is taken from global ionospheric maps (GIM) provided by the International GNSS Service (IGS) as the DORIS data contain no absolute information. DORIS-derived VTEC values show good consistency with IGS GIMs with a RMS between 2 and 3 total electron content units (TECU) depending on solar activity which can be reduced to less than 2 TECU when using only observations with elevation angles higher than \(50^\circ \). The combination of DORIS VTEC with data from other space-geodetic measurement techniques improves the accuracy of global VTEC models significantly. If DORIS VTEC data is used to update IGS GIMs, an improvement of up to 12 % can be achieved. The accuracy directly beneath the DORIS satellites’ ground-tracks ranges between 1.5 and 3.5 TECU assuming a precision of 2.5 TECU for altimeter-derived VTEC values which have been used for validation purposes. 相似文献
Slopes that are terraced by means of dry-stone retaining walls are very common in the alpine environment. In Valtellina, a typical Italian alpine valley, these slopes are widespread and quite often involved in superficial mass movements that can result in severe damage and casualties. For an in-depth understanding of the processes that can trigger these events, numerical modeling of groundwater movement and a related stability analysis were performed on a detailed scale, based on an intensive monitoring of rainfall events and groundwater movement. Field observations suggest that the formation of a perched groundwater table at the contact between the bedrock and the backfill soil of walls as well as the concomitant saturation of this backfill soil are the determining factors of potential slope failure. The numerical models support these observations. In addition, the models are able to explain the mechanisms of formation of perched water tables, highlighting the factors that can influence groundwater levels and slope instabilities. 相似文献
Many rivers worldwide are undergoing severe man-induced alterations which are reflected also in changes of the degree of connectivity between surface waters and groundwater. Pollution, irrigation withdrawal, alteration of freshwater flows, road construction, surface water diversion, soil erosion in agriculture, deforestation and dam building have led to some irreversible species losses and severe changes in community composition of freshwater ecosystems. Taking into account the impact of damming and flow diversion on natural river discharge, the present study is aimed at (i) evaluating the effects of anthropogenic changes on groundwater/surface water interactions; (ii) analyzing the fate of nitrogenous pollutants at the floodplain scale; and (iii) describing the overall response of invertebrate assemblages to such changes. Hydrogeological, geochemical and isotopic data revealed short- and long-term changes in hydrology, allowing the assessment of the hydrogeological setting and the evaluation of potential contamination by nitrogen compounds. Water isotopes allowed distinguishing a shallow aquifer locally fed by zenithal recharge and river losses, and a deeper aquifer/aquitard system fed by surrounding carbonate aquifers. This system was found to retain ammonium and, through the shallow aquifer, release it in surface running waters via the hyporheic zone of the riverbed. All these factors influence river ecosystem health. As many environmental drivers entered in action offering a multiple-component artificial environment, a clear relationship between river flow alteration and benthic and hyporheic invertebrate diversity was not found, being species response driven by the combination of three main stressors: ammonium pollution, man-induced changes in river morphology and altered discharge regime. 相似文献
Accidental release of crude oil into the sea due to human activity causes water pollution and heavy damages to natural ecosystems killing birds, fish, mammals and other organisms. A number of monitoring systems are used for tracking the spills and their effects on the marine environment, as well as for collecting data for feeding models. Among them, Earth observation technologies play a crucial role and moderate spatial resolution satellite systems are able to collect images with a very short revisit time or even daily. This paper describes the use of Moderate-Resolution Imaging Spectroradiometer data for monitoring large oil slicks with the fluorescence/emissivity index and object-based image analysis. Two case studies are presented: the Deepwater Horizon (2010) and the Campos Basin (2011) oil spill accidents. Results show that it is possible to track the dynamics of the slick both for massive and long-lasting accidents and for smaller and very quick accidents. The main advantages of the method proposed are a straightforward implementation, a fast and semi-automated data processing and the capability of integration of daytime and nighttime acquisitions, as well as its adaptability to different sensors. 相似文献
We present experimental results showing the impact of the proposed LightSquared (LS) Long-term Evolution (LTE) signals on both GPS and Galileo civil modulations in the L1/E1 band. The experiments were conducted in radiated mode in a large anechoic chamber. Three Galileo enabled receivers were chosen for the tests, and a state of the art GNSS signal generator was used to simulate both GPS and Galileo signals. The LTE signals were generated by an Agilent Programmable Signal Generator with a license to generate the signals according to the 3GPP LTE FDD standard. The interference impact was measured in terms of a Carrier-to-Noise power spectral density ratio (C/N0) degradation, in accordance with the methodology which the LS/GPS Technical Working Group (TWG) established by mandate of the FCC. A model for determining the impact of the LS signal on the considered GNSS signals is provided and is validated against experimental data. It is shown that the Galileo E1 Open Service (OS) signal is marginally more susceptible to this form of interference than the GPS L1 C/A signal due to its greater proximity to the lower edge of the L1 band. The impact of LS interference was further analyzed in terms of pseudorange and position errors. Despite its relevance for most GNSS users, this aspect was not considered by the TWG. Measurement and position domain analysis along with the study of the LS impact on the Galileo OS signals are the major contributions. The analysis confirms the results obtained by the TWG and shows that the receiver front-end plays a major role in protecting GNSS signals against RF interference. While it appears that, for now, the LS network will not be deployed, the approach taken and the results obtained herein can be readily adapted for any future terrestrial mobile network that may take the place of LS. 相似文献
Optical fibre–based sensors have now established their place in the field of geohazard monitoring due to their sensitivity to strain and temperature changes. Progressive development in the technology leads to the availability of novel, accurate and durable sensors at a relatively limited cost. This creates room for original monitoring applications that have been, so far, impeded by the shortcomings of conventional monitoring tools. In this work, we explore the applicability of an interferometric optical fibre sensor as a vibration sensing tool at laboratory scale. We tested the ability of the sensor to identify precursors of instability in a downscaled model of a rainfall-induced landslide composed of granular material. We carried out four experimental tests which involved different sensor deployments and soil mixtures. The recorded signals were processed by means of a time–frequency analysis and we identified two frequency-domain parameters—the spectral centroid and band power—that could provide information on the development of instability. Their ratio yielded a unique parameter through which a precursory stage could be outlined by defining a threshold value based on the data collected at the beginning of the experiment. In our lab tests, precursors of instability were detected 2–3 min before a crack was observed at the surface. This may upscale to a lead time of about 20–30 min or more in the field, classifying our monitoring approach in between an alarm and a warning system. The work presented here can be considered a first promising step towards an innovative monitoring system and shows the potential of optical fibre sensing as a shallow landslide monitoring technique, encouraging further testing, especially in real-case studies.