Static Analysis of Collision Strength of Offshore Platform     

Li Runpei Chen Weigang Gu Yongning Professor  Shanghai Jiao Tong University  Shanghai Assistant  Shanghai Jiao Tong University  Shanghai 《中国海洋工程》1996,(1)

In this paper a numerical analysis method combining FEM incemental technique with limit analysis concept is proposed for the study of the static strength of offshore platform in collision. Large deformation and plasticity are accounted for and the limit yield surface expressed by generalized stress for a tubular section is derived. The modified stiffness matrix of space beam element is formulated by Plastic Node Method. The buckling behavior of beam columns can also be taken into account. It can trace the generation of plastic hinges during loading and finally the ultimate strength of offshore platform against collision is obtained.  相似文献   

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel     

Tan Jiahua  Ma Wei  Pan Bin Associate Professor  Shanghai Jiao Tong University  Shanghai Lecturer  shanghai Jiao Tong University  Shanghai 《中国海洋工程》1992,(1)

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.  相似文献   

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method     

Chen Tieyun Zhu Zhenghong Professor  Dept. of Naval Architecture  Ocean Engineering  Shanghai Jiao Tong University  Shanghai Lecturer 《中国海洋工程》1991,(1)

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.  相似文献   

乳糖诱导重组别藻蓝蛋白(rAPC)在大肠杆菌(Escherichia coli)中的表达     

唐志红  葛保胜  林凡  任育红  秦松 《海洋与湖沼》2006,37(6):524-528

采用廉价的乳糖替代IPTG诱导重组别藻蓝蛋白(rAPC)在大肠杆菌(Escherichiacoli)JM109中表达,对诱导产物表达的培养基、培养条件、诱导剂的浓度和诱导时机进行了优化,将优化条件用于5L自控发酵罐进行高密度培养。结果表明,对rAPC表达的条件进行优化后,乳糖诱导rAPC的表达率可达26.8%,与IPTG的诱导结果接近;在高密度培养中,OD600最大达21.8。研究结果可为乳糖替代IPTG大规模生产rAPC奠定基础。  相似文献   

Underice Operation of SJT-5 ROV     

Tang Rongqing  Wang Daoyan Zhang Xixian Egnineer  Shanghai Jiao Tong University  Shanghai  Associate Professor  Shanghai Jiao University  Shanghai 《中国海洋工程》1993,(3)

- The authors have used a low-cost ROV of observation type for underice surveying of the Nen-Jiang Cross-river oil pipe line in the Da Qing oil field. The operation method, process and the safety measures for severe cold areas are presented. The fruitful tries and experience may be useful to ROV operators in severe cold areas.  相似文献   

黄骅电厂取水河段取水特性的数模与物模研究     

童中山  应新亚  钱炳法 《海洋工程》1997,(4)

本文采用数值模拟与物模试验相结合的研究方法，详细地研究了黄骅电厂一、二、三期工程的取水特性。结果表明，现有河道只能满足电厂一期工程的取水需求；若将现有河道进行适当开挖，可以满足电厂三期取水需要。  相似文献   

Hydroelastic Analysis of Very Large Floating Structures Using Plate Green Functions   总被引：4，自引：0，他引：4  

闫红梅  崔维成  刘应中 《中国海洋工程》2003,17(2)

1 .IntroductionRecentlygreatinteresthasbeenshowninthedevelopmentofverylargefloatingstructuressuchasMegaFloatofJapan (Isobe ,1 999)andMOBofUSA (Remmers ,1 999) .Owingtotheirextremelargesizeandgreatflexibility ,thecouplingbetweenthestructuraldeformationandfluidmotionissignifi cant.Thisisatypicalproblemofhydroelasticity .Efficientandaccurateestimationofthehydroelasticresponseofverylargefloatingstructuresinwavesisveryimportantfordesign .Manymethodshavebeenproposedinliteratureforthepredictiono…  相似文献   

钝顶螺旋藻部分原生质体及单细胞的制备与培养   总被引：21，自引：0，他引：21  

秦松  王希华  童顺  曾呈奎 《海洋与湖沼》1995,26(1):109-112

于1992年1月-1994年4月，进行超声波处理方法制备钝顶螺旋藻部分原生质体以作为基因工程受体，以及制备单细胞用于固体平板克隆化培养的研究。研究结果表明：超声波以20kHz频率、15W功率作用30s，可使藻丝体断裂成15．0±1．6个细胞长度；延长作用时间，至2－6个细胞长度时，细胞壁结构遭到破坏，形成部分原生质体；继续作用，可形成少量原生质体和大量单细胞。断裂藻丝体、部分原生质体、单细胞以及原生质体均可涂布于固体培养基上再生或生长。以一定密度涂布单细胞与原生质体，能够形成彼此分开的单个克隆，可用于筛选及遗传分析。本文提供了一种节省溶菌酶的制备螺旋藻透性体的方法，超声波作用利于外源基因的导入，而涂布培养利于进一步的筛选和形成克隆。  相似文献   

龙感湖地区近3000年来的植被及其气候定量重建   总被引：18，自引：1，他引：18  

童国榜  吴瑞金 《海洋地质与第四纪地质》1997,17(2):53-61

本文依据龙感湖钻孔的孢粉及硅藻资料，探讨了该地区近３０００年来的植被发展及气候变化，通过数值分析方法，重建了年均温及年降水的时间序列，发现气候波动存在的两个阶段，（依１．５ｋａＢ．Ｐ．前后划分）四个旋回（０．８ｋａ的准周期）两个突变事件（３ｋａＢ．Ｐ）前后的冷暖急剧变化及１ｋａＢ．Ｐ的降温事件）。这些变化与敦德冰心及固城湖孢粉反映的气候波动有较好的一致性，具有全球变化意义。  相似文献   

云贵高原晚新生代孢粉植物群与环境变迁   总被引：8，自引：5，他引：8  

童国榜  羊向东 《海洋地质与第四纪地质》1994,14(3):91-104

本文依据２０多个剖面（钻孔）近７００个样品的孢粉资料及古地磁极性年表建立了云贵高原４Ｍａ以来的孢粉时间序列，并划分了四个区域孢粉组合带，１７个孢粉组合亚带。依据孢粉混杂堆积的出现，认为云贵高原的上升始于２．８ＭａＢ．Ｐ．，加剧于０．８ＭａＢ．Ｐ．前后。前期地形相对高度＜１０００ｍ，后期相对高度达１５００ｍ；地貌经历了开阔盆地－低洼盆地－山地湖盆－高山湖盆的演化。气候经历了古季风、现代季风的发展过程  相似文献