伊-陕斜坡山2段包裹体古流体势恢复及天然气聚集条件   总被引：3，自引：0，他引：3  

刘建章  陈红汉  李剑  胡国艺  单秀琴  罗霞 《地球科学》2007,32(1):93-98

恢复自烃类生成以来的各个地史时期的古流体势, 有助于正确认识油气藏的分布规律.通过对鄂尔多斯盆地伊-陕斜坡太原组—山西组砂岩储层流体包裹体样品的系统分析, 将其油气充注划分为6个期次; 结合埋藏史分析, 确定出6期油气充注发生的时间.在此基础上, 运用流体包裹体pVT热动力学模拟的方法, 获得了6期油气充注的古压力数据, 并计算出伊-陕斜坡山2段6期次天然气充注的古气势, 分析了古气势分布及时空演化规律, 认为区域构造和热史演化是其主要控制因素.结合区域地质资料, 探讨了天然气运移与聚集规律: 晚三叠世中期至中侏罗世末期, 山2段储层气势西南高而北部、东北部低, 天然气主要从西南向北、东北向运移; 中侏罗世末期至早白垩世末期, 气势西高东低, 天然气主要由西向东就近运移, 再向北和东北向运移; 早白垩世末至现今, 天然气藏进入聚集与散失的动平衡状态, 形成现今分布特征.榆林及其南部地区是天然气聚集的最有利地带, 其次为神木-米脂地区.   相似文献   

鄂尔多斯盆地天环坳陷北段奥陶系烃源岩特征及成熟演化史     

黄志刚  任战利  陈玉林  郑庆荣 《地质学报》2022,96(11):3967-3976

为研究天环坳陷北段下古生界天然气成藏规律,利用探井资料和有机地球化学方法,评价了天环坳陷北段奥陶系烃源岩特征并恢复其成熟演化史。天环坳陷北段奥陶系乌拉力克组和克里摩里组烃源岩有机碳含量和生烃潜量相对较高,烃源岩有机质丰度以中等—好为主,少部分为差烃源岩;三道坎组和桌子山组烃源岩以差为主。干酪根组分鉴定表明,天环坳陷北段奥陶系烃源岩主要为Ⅱ₁～Ⅰ型干酪根,热演化程度高,处于生干气阶段。成熟演化史模拟显示,古生代—中生代早期地温梯度低,地层埋藏浅,烃源岩成熟演化程度低。燕山期,由于构造热事件,地温梯度迅速升高,早白垩世烃源岩经历的最高温度超过200℃,达到生气高峰期,早白垩世是油气成藏的主要时期。早白垩世之后,鄂尔多斯盆地整体抬升,地温梯度减小,生烃作用停止。  相似文献   

Predicting TBM penetration rate in hard rock condition: A comparative study among six XGB-based metaheuristic techniques     

Jian Zhou  Yingui Qiu  Danial Jahed Armaghani  Wengang Zhang  Chuanqi Li  Shuangli Zhu  Reza Tarinejad 《地学前缘(英文版)》2021,(3):201-213

A reliable and accurate prediction of the tunnel boring machine(TBM) performance can assist in minimizing the relevant risks of high capital costs and in scheduling tunneling projects.This research aims to develop six hybrid models of extreme gradient boosting(XGB) which are optimized by gray wolf optimization(GWO), particle swarm optimization(PSO), social spider optimization(SSO), sine cosine algorithm(SCA), multi verse optimization(MVO) and moth flame optimization(MFO), for estimation of the TBM penetration rate(PR).To do this, a comprehensive database with 1286 data samples was established where seven parameters including the rock quality designation, the rock mass rating, Brazilian tensile strength(BTS), rock mass weathering, the uniaxial compressive strength(UCS), revolution per minute and trust force per cutter(TFC), were set as inputs and TBM PR was selected as model output.Together with the mentioned six hybrid models, four single models i.e., artificial neural network, random forest regression, XGB and support vector regression were also built to estimate TBM PR for comparison purposes.These models were designed conducting several parametric studies on their most important parameters and then, their performance capacities were assessed through the use of root mean square error, coefficient of determination, mean absolute percentage error, and a10-index.Results of this study confirmed that the best predictive model of PR goes to the PSO-XGB technique with system error of(0.1453, and 0.1325), R~2 of(0.951, and 0.951), mean absolute percentage error(4.0689, and 3.8115), and a10-index of(0.9348, and 0.9496) in training and testing phases, respectively.The developed hybrid PSO-XGB can be introduced as an accurate, powerful and applicable technique in the field of TBM performance prediction.By conducting sensitivity analysis, it was found that UCS, BTS and TFC have the deepest impacts on the TBM PR.  相似文献   

Annual Frequency of Tropical Cyclones Directly Affecting Guangdong Province:Prediction Based on LSTM-FC     

胡娅敏  陈韵竹  何健  刘圣军  闫文杰  赵亮  汪明圣  李芷卉  王娟怀  董少柔  刘新儒 《热带气象学报(英文版)》2022,28(1):45-56

Tropical cyclone(TC) annual frequency forecasting is significant for disaster prevention and mitigation in Guangdong Province. Based on the NCEP-NCAR reanalysis and NOAA Extended Reconstructed global sea surface temperature(SST) V5 data in winter, the TC frequency climatic features and prediction models have been studied.During 1951-2019, 353 TCs directly affected Guangdong with an annual average of about 5.1. TCs have experienced an abrupt change from abundance to deficiency in the mid to late ...  相似文献   

一次新型液态CO2播撒效果的数值模拟   总被引：1，自引：1，他引：0       下载免费PDF全文

刘健  纪瑛英  蒋彤  陈知新  米长树  汪晓梅 《气象与环境学报》2006,22(2):18-21

利用三维积层混合云人工增雨数值模式对2002年7月11日的一次天气过程进行了由播撒液态CO2引起的微物理量变化及云动力影响的数值模拟。结果表明:播撒后,云中最大上升气流速度增大,由未播撒时的0.37 m/s增大到播撒后的0.54 m/s,播撒使云中出现最大上升速度W的时间比未播撒提前了4 min,表明播撒液态CO2影响了云的动力过程。同时与未播撒相比:云中雨水含量最大值由1.04 g/kg增加到1.40 g/kg;冰粒子含水量的出现提前了88 min,最大值的出现提前了76min;冰粒子浓度的出现提前了72 min,最大值的出现提前了72 min;雪粒子含水量的出现提前了72 min,最大值的出现提前了128 min;云水含量最大值由1.21 g/kg减小到0.87 g/kg。证明了播撒液态CO2后可影响云的微物理过程,从而导致地面降水的增加。  相似文献   

海洋纤维增强热塑性立管极限承载拉力预测方法     

何杨烨  谭健  韩元明  袁坤  刘军鹏  安峰辰 《海洋工程》2024,(3):44-59

海洋新型纤维增强热塑性立管因其可盘卷、耐腐蚀、耐疲劳和轻质化等优点,在深水油气开发中应用前景十分广阔。热塑性立管具有复合材料的各向异性、受力耦合效应及复杂的本构关系,且承受浮体运动和复杂海洋环境载荷,其失效模式尚未明确。针对轴对称载荷作用下纤维增强热塑性立管极限承载力问题,进行热塑性管稳态热传导和热应力的理论推导,求解了稳态温度和应力分布,首次给出了在任意温度载荷作用下管体径向位移的解析解,并直接求解其径向、轴向、环向和剪切应力。采用各向同性层Von Mises和各向异性层最大应力（Max Stress）准则或Tsai-Hill准则判定热塑性管的失效,基于应力分布、失效准则和二分法计算了热塑性管的极限载荷。温度载荷、纤维铺设角度和径厚比对管道的应力分布影响显著。不同温度载荷会改变失效指数沿径向的变化趋势,增大轴向拉力将增大热塑性管的失效指数,选用不同的失效准则在管体失效判定上存在一定的差异。热塑性管温度越低、纤维铺设角越小及径厚比越大,管道对轴向拉伸载荷的承载能力越强。  相似文献   

页岩气水平井TOC测井评价新方法     

刘伟男  张超谟  朱林奇  胡松  孔政  邓瑞 《物探与化探》2021,(2):423-431

由于存在地层缺失、井眼穿层不断变化、重点层段测井曲线较少、井眼环境复杂、测井响应值与储层参数关系较为复杂等特点,页岩气储层水平井测井解释难度较大.针对该问题,本文采用“水平井钻遇地层模型—水平井间及水平井与直井响应差异分析—水平井曲线校正—基于直井的参数评价模型”的评价技术流程,进行页岩气水平井TOC测井评价.在测井评...  相似文献   

Variations in annual winter mean temperature in South China since 1736          下载免费PDF全文

Lingling Ding  Quansheng Ge  Jingyun Zheng  Zhixin Hao 《Boreas: An International Journal of Quaternary Research》2016,45(2):252-259

Modern meteorological observations in South China from 1960 to 2009 show a strong correlation between winter temperatures and two snowfall parameters, the southern boundary of the snow and the number of snowy days. Based on this relationship, the variation in annual winter mean temperature in South China from 1736 to 2009 was reconstructed using data acquired from Chinese historical documents dating from the Qing dynasty, such as memos and local gazettes. The reconstructed time series were used to analyse variations in winter temperature in South China. Significant interannual and interdecadal changes were found. The maximum temperature difference between neighbouring years was 3.1 °C for 1958–2009 and 3.0 °C for 1736–1957, whereas the maximum temperature difference between adjacent decades was 0.8 °C for the 1960s–2000s and 0.6 °C for the 1740s–1950s. The 2000s was the warmest decade; the mean temperature was 1.6 °C higher than that of the 1870s, which was the coldest decade between the 1740s and the 2000s. The mean winter temperature was warmer in the 18th and 20th centuries and coldest in the 19th century.  相似文献   

Lateral dynamic response of a pipe pile in saturated soil layer          下载免费PDF全文

Changjie Zheng  Hanlong Liu  Xuanming Ding 《国际地质力学数值与分析法杂志》2016,40(2):159-184

This paper presents an analytical solution for the lateral dynamic response of a pipe pile in a saturated soil layer. The wave propagations in the saturated soil and the pipe pile are simulated by Biot's three‐dimensional poroelastic theory and one‐dimensional elastic theory, respectively. The governing equations of soil are solved directly without introducing potential functions. The displacement response and dynamic impedances of the pipe pile are obtained based on the continuous conditions between the pipe pile and both the outer and inner soil. A comparison with an existing solution is performed to verify the proposed solution. Selected numerical results for the lateral dynamic responses and impedances of the pipe pile are presented to reveal the lateral vibration characteristics of the pile‐soil system. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Investigation of highly efficient algorithms for solving linear equations in the discontinuous deformation analysis method          下载免费PDF全文

Xiaodong Fu  Qian Sheng  Yonghui Zhang  Jian Chen 《国际地质力学数值与分析法杂志》2016,40(4):469-486

Large‐scale engineering computing using the discontinuous deformation analysis (DDA) method is time‐consuming, which hinders the application of the DDA method. The simulation result of a typical numerical example indicates that the linear equation solver is a key factor that affects the efficiency of the DDA method. In this paper, highly efficient algorithms for solving linear equations are investigated, and two modifications of the DDA programme are presented. The first modification is a linear equation solver with high efficiency. The block Jacobi (BJ) iterative method and the block conjugate gradient with Jacobi pre‐processing (Jacobi‐PCG) iterative method are introduced, and the key operations are detailed, including the matrix‐vector product and the diagonal matrix inversion. Another modification consists of a parallel linear equation solver, which is separately constructed based on the multi‐thread and CPU‐GPU heterogeneous platforms with OpenMP and CUDA, respectively. The simulation results from several numerical examples using the modified DDA programme demonstrate that the Jacobi‐PCG is a better iterative method for large‐scale engineering computing and that adoptive parallel strategies can greatly enhance computational efficiency. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献