IRCS/Subaru observations of water in the inner coma of Comet 73P-B/Schwassmann-Wachmann 3: Spatially resolved rotational temperatures and ortho-para ratios     

Boncho P. Bonev  Michael J. Mumma  Hitomi Kobayashi 《Icarus》2008,196(1):241-248

Comet 73P-B/Schwassmann-Wachmann 3 was observed with IRCS/Subaru at geocentric distance of 0.074 AU on UT 10 May 2006. Multiple H₂O emission lines were detected in non-resonant fluorescence near 2.9 μm. No significant variation in total H₂O production rate was found during the (3 h) duration of our observations. H₂O rotational temperatures and ortho-to-para abundance ratios were measured for several positions in the coma. The temperatures extracted from two different time intervals show very similar spatial distributions. For both, the rotational temperature decreased from ∼110 to ∼90 K as the projected distance from the nucleus increased from ∼5 to ∼30 km. We see no evidence for OPR change in the coma. The H₂O ortho-para ratio is consistent with the statistical equilibrium value (3.0) for all spatially resolved measurements. This implies a nuclear spin temperature higher than ∼45 K.  相似文献   

‘Box‐Profile’ Ion Implants as Geochemical Reference Materials for Electron Probe Microanalysis and Secondary Ion Mass Spectrometry     

Haosheng Wu  Roman Bttger  Frdric Couffignal  Jens Gutzmer  Joachim Krause  Frans Munnik  Axel D. Renno  Ren Hübner  Michael Wiedenbeck  Ren Ziegenrücker 《Geostandards and Geoanalytical Research》2019,43(4):531-541

Although electron probe microanalysis and secondary ion mass spectrometry are widely used analytical techniques for geochemical and mineralogical applications, metrologically rigorous quantification remains a major challenge for these methods. Secondary ion mass spectrometry (SIMS) in particular is a matrix‐sensitive method, and the use of matrix‐matched reference materials (RMs) is essential to avoid significant analytical bias. A major problem is that the number of available RMs for SIMS is extremely small compared with the needs of analysts. One approach for the production of matrix‐specific RMs is the use of high‐energy ion implantation that introduces a known amount of a selected isotope into a material. We chose the more elaborate way of implanting a so‐called ‘box‐profile’ to generate a quasi‐homogeneous concentration of the implanted isotope in three dimensions, which allows RMs not only to be used for ion beam analysis but also makes them suitable for EPMA. For proof of concept, we used the thoroughly studied mineralogically and chemically ‘simple’ SiO₂ system. We implanted either ⁴⁷Ti or ⁴⁸Ti into synthetic, ultra‐high‐purity silica glass. Several ‘box‐profiles’ with mass fractions between 10 and 1000 μg g^?1 Ti and maximum depths of homogeneous Ti distribution between 200 nm and 3 μm were produced at the Institute of Ion Beam Physics and Materials Research of Helmholtz‐Zentrum Dresden‐Rossendorf. Multiple implantation steps using varying ion energies and ion doses were simulated with Stopping and Range of Ions in Matter (SRIM) software, optimising for the target concentrations, implantation depths and technical limits of the implanter. We characterised several implant test samples having different concentrations and maximum implantation depths by means of SIMS and other analytical techniques. The results show that the implant samples are suitable for use as reference materials for SIMS measurements. The multi‐energy ion implantation technique also appears to be a promising procedure for the production of EPMA‐suitable reference materials.  相似文献   

Zircon U-Pb-Hf constraints from Gongga Shan granites on young crustal melting in eastern Tibet     

Nick M.W.Roberts  Michael P.Searle 《地学前缘(英文版)》2019,10(3):885-894

The Gongga Shan batholith is a complex granitoid batholith on the eastern margin of the Tibetan Plateau with a long history of magmatism spanning from the Triassic to the Pliocene. Late Miocene-Pliocene units are the youngest exposed crustal melts within the entire Asian plate of the Tibetan Plateau.Here, we present in-situ zircon Hf isotope constraints on their magmatic source, to aid the understanding of how these young melts were formed and how they were exhumed to the surface. Hf isotope signatures of Eocene to Pliocene zircon rims(ε_Hf(t)=-4 to +4), interpreted to have grown during localised crustal melting, are indicative of melting of a Neoproterozoic source region, equivalent to the nearby exposed Kangding Complex. Therefore, we suggest that Neoproterozoic crust underlies this region of the Songpan-Ganze terrane, and sourced the intrusive granites that form the Gongga Shan batholith. Localised young melting of Neoproterozoic lower or middle crust requires localised melt-fertile lithologies. We suggest that such melts may be equivalent to seismic and magnetotelluric low-velocity and high-conductivity zones or "bright spots" imaged across much of the Tibetan Plateau. The lack of widespread exposed melts this age is due either to the lack of melt-fertile rocks in the middle crust, the very low erosion level of the Tibetan plateau, or to a lack of mechanism for exhuming such melts. For Gongga Shan, where some melting is younger than nearby thermochronological ages of low temperature cooling, the exact process and timing of exhumation remains enigmatic, but their location away from the Xianshuihe fault precludes the fault acting as a conduit for the young melts. We suggest that underthrusting of dry granulites of the lower Indian crust(Archaean shield) this far northeast is a plausible mechanism to explain the uplift and exhumation of the eastern Tibetan Plateau.  相似文献   

William Smith's map brought alive by digital remastering     

Alan R. Butcher  Duncan Pirrie  Gavyn K. Rollinson  Hanna Horsch  Stephen P. Hesselbo  Michael Owen  David Haberlah 《Geology Today》2020,36(5):175-182

The geological mapping carried out by William Smith, which resulted in the publication of his famous map in 1815, was remarkable in many respects, not least because it relied on him being able to make consistent and accurate observations on the rock types he encountered during his fieldwork. This ability, gained from his many years studying rocks, allowed him to observe features with his own eyes (or at the very least, with the aid of a simple magnifying device) that others could not. We take a new look at William Smith's original stratigraphical sequences, and with samples collected from his classic field areas (many of which are around the city of Bath, Somerset, UK), demonstrate how spatial mineralogy mapping can be incorporated into the modern age of digital mapping.  相似文献   

The variation and controls of mean transit times in Australian headwater catchments     

Ian Cartwright  Uwe Morgenstern  William Howcroft  Harald Hofmann  Robin Armit  Michael Stewart  Chad Burton  Dylan Irvine 《水文研究》2020,34(21):4034-4048

Determining mean transit times in headwater catchments is critical for understanding catchment functioning and understanding their responses to changes in landuse or climate. Determining whether mean transit times (MTTs) correlate with drainage density, slope angle, area, or land cover permits a better understanding of the controls on water flow through catchments and allows first-order predictions of MTTs in other catchments to be made. This study assesses whether there are identifiable controls on MTTs determined using ³H in headwater catchments of southeast Australia. Despite MTTs at baseflow varying from a few years to >100 years, it was difficult to predict MTTs using single or groups of readily-measured catchment attributes. The lack of readily-identifiable correlations hampers the prediction of MTTs in adjacent catchments even where these have similar geology, land use, and topography. The long MTTs of the Australian headwater catchments are probably in part due to the catchments having high storage volumes in deeply-weathered regolith, combined with low recharge rates due to high evapotranspiration. However, the difficulty in estimating storage volumes at the catchment scale hampers the use of this parameter to estimate MTTs. The runoff coefficient (the fraction of rainfall exported via the stream) is probably also controlled by evapotranspiration and recharge rates. Correlations between the runoff coefficient and MTTs in individual catchments allow predictions of MTTs in nearby catchments to be made. MTTs are shorter in high rainfall periods as the catchments wet up and shallow water stores are mobilized. Despite the contribution of younger water, the major ion geochemistry in individual catchments commonly does not correlate with MTTs, probably reflecting heterogeneous reactions and varying degrees of evapotranspiration. Documenting MTTs in catchments with high storage volumes and/or low recharge rates elsewhere is important for understanding MTTs in diverse environments.  相似文献   

Insights into agricultural influences and weathering processes from major ion patterns          下载免费PDF全文

Robert van Geldern  Peter Schulte  Michael Mader  Alfons Baier  Johannes A.C. Barth  Tobias R. Juhlke  Kern Lee 《水文研究》2018,32(7):891-903

Karst areas and their catchments pose a great challenge for protection because fast conduit flow results in low natural attenuation of anthropogenic contaminants. Studies of the hydrochemistry of karst sources and river solutes are an important tool for securing and managing water resources. A study of the geochemical downriver evolution of the Wiesent River and its tributaries, located in a typical karst terrain, revealed unexpected downstream decreases of nitrate with maximum mean values of 30 mg/L at the source to minimum values of 18 mg/L near the river mouth. This trend persisted over the length of the river even though increased agricultural activities are evident in the downstream section of the catchment. This pattern is caused by fertilizer inputs via diffusive and fast conduits flow from karst lithology in the upstream area that may have reached the river's source even from beyond the hydrological catchment boundaries. Further downstream, these influences became diluted by tributary inputs that drain subcatchments dominated by claystone and sandstone lithologies that increased potassium and sulphate concentrations. Our findings indicate that bedrock geology remains the dominant control on the major ion chemistry of the Wiesent River and that agricultural influences are strongest near the headwaters despite increased land use further downstream, due to long‐term storage and accumulation in karst aquifers. This feature may not be unique to the Wiesent River system, as carbonates cover significant portions of the Earth's surface and subsequent work in other river systems could establish whether such patterns are ubiquitous worldwide.  相似文献   

Calibration of oxygen isotope fractionation and calcite-corundum thermometry in emery at Naxos,Greece     

Rachelle B. Turnier  Yaron Katzir  Kouki Kitajima  Ian J. Orland  Michael J. Spicuzza  John W. Valley 《Journal of Metamorphic Geology》2020,38(1):53-70

Corundum (Crn), including sapphire, occurs in emery pods surrounded by marble on the island of Naxos, Greece. The emery formed from bauxite deposited in karst that was metamorphosed to 400–700°C at 20–15 Ma. Many of these rocks initially appeared well suited for refractory accessory mineral (RAM) thermometry, which uses oxygen isotope fractionation between a RAM – corundum – and a modally dominant phase with faster diffusion of oxygen – calcite (Cc) – to determine peak metamorphic temperatures. However, previous attempts at oxygen isotope thermometry were confounded by highly variable fractionations (Δ¹⁸O) measured at mm-scale and the uncertain calibration of Δ¹⁸O(Cc-Crn) versus temperature. Secondary ion mass spectrometry (SIMS) permits in situ analysis of δ¹⁸O in corundum and calcite at the 10-μm scale in adjacent grains where textures suggest peak metamorphic equilibrium was attained. SIMS analyses of adjacent mineral pairs in eight rocks yield values of Δ(Cc-Crn) that systematically decrease from 7.2 to 2.9‰ at higher metamorphic grade. Pairing these data with independent temperature estimates from mineral isograds yields an empirical calibration of 1,000 lnα(Cc-Crn) = 2.72 ± 0.3 × 10⁶/T² (T in K). The new fractionations (2.7‰ at 1,000 K) are significantly smaller than those calculated from the modified increment method (6.5‰ at 1,000 K; Zheng, Geochimica et Cosmochimica Acta, 1991, 55:2299–2307; Zheng, Mineral Mag, 1994, 58A:1000–1001), which yield unreasonably high temperatures of 630 to 1,140°C when applied to the new Naxos data. The new calibration of Δ(Cc-Crn) can be combined with published fractionations to calculate A-factors for corundum versus a range of 14 other minerals. These new fractionation factors can be used for thermometry or to constrain the genesis of corundum. A compilation of gem corundum δ¹⁸O values shows that many igneous sapphires, including important deposits of basalt-associated sapphire, are mildly elevated in δ¹⁸O relative to the calculated range in equilibrium with mantle values (4.4–5.7‰) and formed from evolved magmas.  相似文献   

Untangling global change impacts on hydrological processes: Resisting climatization     

Michael L. Wine  Jason H. Davison 《水文研究》2019,33(15):2148-2155

  相似文献   

Titanite dates crystallization: Slow Pb diffusion during super‐solidus re‐equilibration     

Michael I. H. Hartnady  Christopher L. Kirkland  Chris Clark  Catherine V. Spaggiari  R. Hugh Smithies  Noreen J. Evans  Brad J. McDonald 《Journal of Metamorphic Geology》2019,37(6):823-838

Titanite can be found in rocks of wide compositional range, is reactive, growing or regrowing during metamorphic and hydrothermal events, and is generally amenable to U–Pb geochronology. Experimental evidence suggest that titanite has a closure temperature for Pb ranging from 550 to 650°C, and thus titanite dates are commonly interpreted as cooling ages. However, this view has been challenged in recent years by evidence from natural titanite which suggests the closure temperature may be significantly higher (up to 800°C). Here, we investigate titanite in an enclave of migmatitic gneiss included within a granite intrusion. The titanite crystals exhibit textural features characteristic of fluid‐mediated mass transfer processes on length scales of <100 µm. These textural features are associated with variation in both Pb concentrations and distinct U–Pb isotopic compositions. Zr‐in‐titanite thermometry indicates that modification of the titanite occurred at temperatures in excess of 840°C, in the presence of a high‐T silicate melt. The Pb concentration gradients preserved in these titanite crystals are used to determine the diffusivity of Pb in titanite under high‐T conditions. We estimate diffusivities ranging from 2 × 10^?22 to 5 × 10^?25 m²/s. These results are significantly lower than experimental data predict yet are consistent with other empirical data on natural titanites, suggesting that Pb diffusivity is similar to that of Sr. Thus our data challenge the wide‐held assumption that U–Pb titanite dates only reflect cooling ages.  相似文献   

Influence of length effect on embankment slope reliability in 3D          下载免费PDF全文

Michael A. Hicks  Yajun Li 《国际地质力学数值与分析法杂志》2018,42(7):891-915

Embankment slopes composed of spatially variable soils have a variety of different failure modes that are affected by the correlation distances of the material properties and the geometry and total length of the slope. This paper examines the reliability of soil slopes for embankments of different length and uses parallel computing to analyse very long embankments (up to 100 times the embankment height) for a clay soil characterised by a spatially varying undrained shear strength. Based on a series of analyses using the 3D random finite element method (RFEM), it is first shown that the reliability of slopes of various length can be efficiently computed by combining simple probability theory with a detailed 3D RFEM analysis of a representative shorter slope of length 10 times the slope height. RFEM predictions of reliability indices for longer slopes are then compared with results obtained using Vanmarcke's (1977a) simplified 3D method and Calle's (1985) extended 2D approach. It is shown that these methods can give significantly different results, depending on the horizontal scale of fluctuation relative to the slope length, with RFEM predicting a lower slope reliability than the Vanmarcke and Calle solutions in all cases. The differences in the solutions are evaluated and attributed to differences in the assumed and computed failure surface geometries.  相似文献