一种采用基础矩阵描述的核线影像生成方法     

崔瑞兵  靳国旺  张红敏  熊新  王罗刚 《测绘科学技术学报》2016,(3):295-300

设计了一种采用基础矩阵的立体像对核线影像制作方法,由基础矩阵来描述影像间的相对方位关系,避免了相对定向过程中复杂的迭代过程。通过稀疏匹配获取高精度的同名点,由基础矩阵确定每组同名点对应的同名核线,根据核线必相交于核点的原理,采用最小二乘法确定左右影像的核点坐标;然后根据核点坐标完成影像间核线的快速映射,沿核线方向采用双线性内插法进行核线重采样,完成核线影像制作。采用多组影像进行核线影像制作实验,对生成的核线影像进行同名特征点提取与匹配,结果表明采用该方法制作的核线影像上下视差较小,验证了方法的有效性。  相似文献   

基于线要素动态化简的匹配算法比较与评价     

陈竞男  钱海忠  王骁  何海威  胡慧明 《测绘科学技术学报》2016,(1)

矢量线要素数据来源多样,细节层次不一,限制了已有匹配算法正确率的提高,同时也给算法评价带来困难。化简可以减少线要素细节层次,提取其主要形态,据此提出一种基于线要素动态化简的匹配算法评价新方法。对不同匹配算法采用相同数据,在相同化简算法支撑下进行匹配,从而实现对不同匹配算法的评价。首先,阐述动态化简方法提取线要素主要形态的过程;其次,利用动态化简分别辅助4种已有匹配算法,获取每个匹配算法的最优匹配正确率;最后,将4种匹配算法的原始匹配结果与加入动态化简后的匹配结果进行对比,分析化简对匹配结果的影响,并把该影响运用到匹配算法的比较和评价中来。其中,1通过匹配正确率变化、误匹配等分析了匹配算法的数据适用性;2通过化简比例系数K变化时新增匹配数量的统计,评价了匹配算法对线要素局部细节的敏感程度并提出该指标的量化方法;3结合匹配算法采用的匹配相似度指标对其作出评价。  相似文献   

Contained density currents with high volume of release   总被引：1，自引：0，他引：1       下载免费PDF全文

Quentin Theiler  Mário J. Franca 《Sedimentology》2016,63(6):1820-1842

Contained density currents with high volume of release reflect against the boundaries of the reception environment commonly leading to oscillatory flow. These flows exist in sediment clarifiers, compromising their operations, and deposited signatures of contained turbidity currents are found as part of the infill of sedimentary basins; for operation of the former and interpretation of the latter it is essential to understand the dynamic processes of these flows. Six lock‐exchange experiments with different initial densities were made in a horizontal flume, where the volume of the saline mixture in the lock was equivalent to the volume of the ambient fluid. A further two tests, with a repeated initial density, were made: one with high volume of release and very long duration; and another with low volume of release. Firstly, the movement of the current is discussed, including the oscillations within the experimental tank involving the density current and an upper layer counter‐current. It is shown that the cyclic behaviour is self‐similar with the reduced gravity of the initial density in the lock. Secondly, entrainment and water mixing processes are characterized. The time evolution of mixing is characterized qualitatively by analysing the background potential energy of the density distributions to show that mixing occurs even in the earlier stages of the current, and mainly within the first cycle of the oscillation. Quantified analysis reveals that, in currents with high volume of release, entrainment discharge is one order of magnitude higher, mainly due to the larger interface between the ambient fluid and the current. A model for the evolution of the mixing process is proposed for density currents with high volume of release. Finally, the dynamics of the head of the current is analysed. The entrainment in the head, when compared to the entrainment in the remainder body of the flows, is less important for the configuration with a larger lock.  相似文献   

电感耦合等离子体质谱法测定铅合金中的微量杂质元素镉和锡   总被引：1，自引：1，他引：0  

郝原芳  刘新  宋丽华  李丽君  徐英奎 《岩矿测试》2016,35(4):378-383

铅合金中的镉和锡由于含量较低,国家标准方法均为单一元素分析,步骤繁琐,检出限高,难以达到理想的检出要求。本文建立了应用电感耦合等离子体质谱法(ICP-MS)测定铅合金中微量级(μg/g级)杂质元素镉和锡的分析方法。采用单一的低浓度硝酸溶解铅合金,用低温慢溶的方式使样品溶解更加完全,减少了多离子对仪器的干扰;通过铅基体匹配和加入酒石酸保证了标准与样品介质的一致性,同时避免了锡的水解;以~(103)Rh作为内标元素,~(111)Cd和~(118)Sn作为测量同位素克服了质谱干扰。方法检出限为镉0.05 ng/g、锡0.04 ng/g,比国家标准方法的检出限(1~6μg/g)低,精密度小于4%。该方法试剂用量少,减少了处理样品的复杂性,实现了合金中微量级元素的准确测定。  相似文献   

利用LA-ICP-MS在16 μm和10 μm激光束斑条件下测定独居石U-Th-Pb年龄     

汪双双  韩延兵  李艳广  魏小燕  靳梦琪  程秀花 《岩矿测试》2016,35(4):349-357

我国锂钾主要矿产资源大多分布在西部偏远地区,其勘查找矿或综合利用迫切需要现场快速分析技术的支持。本文介绍了自行开发的便携式Li-K分析仪的主要性能及其在锂辉石中锂的分析应用。Li-K分析仪是一种基于大气压的液体阴极辉光放电光谱仪,以待测液体为放电阴极,实现样品中Li、K等元素的原子化和激发。该仪器以光纤传导CCD光谱仪作为检测器,其波长范围为345～1015 nm,分辨率3 nm;以Li 670.78 nm和K 769.90 nm分析谱线,在最佳仪器工作条件下测定Li、K的精密度（RSD,n=14）均低于2%,检出限为0.03 μg/mL,检测范围0.1～10 μg/mL。研究表明,不同酸度和酸的类型对谱线强度影响较大,且存在显著的样品基体效应,标准曲线法分析锂辉石中Li的结果偏差高达267%;而标准加入法可克服基体效应的影响,获得与ICP-OES一致性较好的分析结果,为现场开展固体样品中Li的测定奠定了基础。  相似文献   

Modeling discontinuous rock mass based on smoothed finite element method     

《Computers and Geotechnics》2016

This paper aims at developing a method for modeling rock mass with preexisting multiple discontinuities within the framework of the smoothed finite element method (SFEM). The discontinuity is simulated by an interface element with zero thickness, the stiffness matrix of which are derived explicitly based on the SFEM. An elastic damage constitutive relation with residual strength is introduced in order to describe the nonlinear mechanical behavior of the discontinuities. The computation codes of the present method were developed. The present method has been verified to be a sound approach for modeling discontinuous rock mass, inheriting the advantages of the SFEM.  相似文献   

Mesh-free analysis applied in reinforced soil slopes     

《Computers and Geotechnics》2016

One of the most applicable geotechnical structures whose analysis is carried out through iterative procedures is the reinforced soil slope. In this regard, the most successful method for the reinforced slope analysis through numerical methods is the finite element method whose updating mesh may result in some difficulties. In this study, the Natural Element Method (NEM), which is a mesh-free method, in conjunction with conventional limit equilibrium is implemented to find the slip surface in the reinforced slopes. Results demonstrate the convergence and preciseness of the present method in comparison with the other numerical methods and conventional limit equilibrium method.  相似文献   

An efficient quasi-Newton approximation-based SORM to estimate the reliability of geotechnical problems     

《Computers and Geotechnics》2016

The first order reliability method (FORM) is efficient, but it has limited accuracy; the second order reliability method (SORM) provides greater accuracy, but with additional computational effort. In this study, a new method which integrates two quasi-Newton approximation algorithms is proposed to efficiently estimate the second order reliability of geotechnical problems with reasonable accuracy. In particular, the Hasofer–Lind–Rackwitz–Fiessler–Broyden–Fletcher–Goldfarb–Shanno (HLRF–BFGS) algorithm is applied to identify the design point on the limit state function (LSF), and consequently to compute the first order reliability index; whereas the Symmetric Rank-one (SR1) algorithm is nested within the HLRF–BFGS algorithm to compute good approximations, yet with a reduced computational effort, of the Hessian matrix required to compute second order reliabilities. Three typical geotechnical problems are employed to demonstrate the ability of the suggested procedure, and advantages of the proposed approach with respect to conventional alternatives are discussed. Results show that the proposed method is able to achieve the accuracy of conventional SORM, but with a reduced computational cost that is equal to the computational cost of HLRF–BFGS-based FORM.  相似文献   

DEM simulations of methane hydrate exploitation by thermal recovery and depressurization methods     

《Computers and Geotechnics》2016

Methane hydrate (MH, also called fiery ice) exists in forms of pore filling, cementing and load-bearing skeleton in the methane hydrate bearing sediment (MHBS) and affects its mechanical behavior greatly. To study the changes of macro-scale and micro-scale mechanical behaviors of MHBS during exploitation by thermal recovery and depressurization methods, a novel 2D thermo-hydro-mechanical bonded contact model was proposed and implemented into a platform of distinct element method (DEM), PFC2D. MHBS samples were first biaxially compressed to different deviator stress levels to model different in-situ stress conditions. With the deviator stress maintained at constant, the temperature was then raised to simulate the thermal recovery process or the pore water pressure (i.e. confining pressure for MH bond) was decreased to simulate the depressurization process. DEM simulation results showed that: during exploitation, the axial strain increased with the increase of temperature (in the thermal recovery method) or decrease of pore water pressure (in the depressurization method); sample collapsed during MH dissociation if the deviator stress applied was larger than the compression strength of a pure host sand sample; sample experienced volume contraction but its void ratio was slightly larger than the pure host sand sample at the same axial strain throughout the test. By comparison with the laboratory test results, the new model was validated to be capable of reproducing the exploitation process by thermal recovery and depressurization methods. In addition, some micro-scale parameters, such as contact distribution, bond distribution, and averaged pure rotation rate, were also analyzed to investigate their relationships with the macroscopic responses.  相似文献   

The behavior of a multilayered porous thermo-elastic medium with anisotropic thermal diffusivity and permeability     

《Computers and Geotechnics》2016

With the aid of integral transform techniques, this paper presents an extended precise integration solution for thermal consolidation problems of a multilayered porous thermo-elastic medium with anisotropic thermal diffusivity and permeability due to a heat source. From the fundamental governing equations, ordinary differential equations are derived by employing Laplace–Hankel transforms. By applying the extended precise integration method, equations in the transformed domain can be solved, and the actual solutions are further obtained by adopting a numerical inverse transformation. The accuracy and feasibility of the proposed theory is demonstrated by contrastive analysis with existing studies. Finally, several examples are carried out to investigate the influence of heat source’s type, axial distance, burial depth of heat source, ratio of thermo-permeability, permeability anisotropy, thermal diffusivity anisotropy and stratification on the thermal consolidation process.  相似文献