新疆和田地区耕地面源污染生态风险评价          下载免费PDF全文

田丰收  刘新平  原伟鹏 《干旱区地理》2019,42(2):295-304

随着化肥、农膜等在农业生产中的过量投入，耕地面源污染的程度随之加重。文章选取塔里木河流域上游和田地区为研究区域，依据P-S-R框架理论，构建和田地区耕地面源污染生态风险评价指标体系，加入土壤理化数据，使用生态风险评价模型对和田地区1980 年及2016 年耕地面源污染状况进行生态风险评价，运用耕地生态风险模型、生态风险转移矩阵、Arcgis分析和田地区耕地面源污染时空分异状况。研究结论如下：和田地区1980 年耕地生态风险等级均为II级或III级，呈“中间高，两侧低”分布；2016 年耕地生态风险等级上升至IV级或V级，呈“倒W型”分布，各县耕地面源污染程度较1980 年均有较大幅度的上升，其中墨玉县和于田县在2016 年耕地生态风险等级达到最高的V级，而民丰县因自身生态环境的强脆弱性，同样需要提高关注。根据面源污染“从源头治理”的原则，应切实推进和田地区耕地生态环境保护与治理，提高政府重视程度，增强技术指导，开展试点工作，改善和田地区耕地面源污染现状。  相似文献   

Land Resource Carrying Capacity in Xilin Gol Grassland Transects: A Perspective on Food Nutritional Demand     

YANG Wanni  ZHEN Lin  LUO Qi 《资源与生态学报(英文版)》2019,10(6):614-620

Food safety is an important issue for the development of the national economy and society. Studying regional food supply and demand from the perspective of land resource carrying capacity can provide new references for regional resource sustainability. This study uses the data from farmer and herdsmen household questionnaires, statistical data, land use data, and other sources to construct a land resource carrying capacity (LCC) assessment framework, targeting the food supply and demand of residents in representative areas, specifically the typical grassland pastoral areas, sandy pastoral areas and agro-pastoral areas on the Xilin Gol grassland transects. The three food nutritional indicators of calories, protein and fat were selected for analyzing the balance of land resource carrying capacity. We found that: 1) Along the Xilin Gol grassland, the main local food supply showed a shift from meat and milk to grains, vegetables and fruits. 2) From north to south along the grassland transects, the calorie intake increased gradually, while the intake of protein and fat was highest in pastoral areas and lowest in agricultural areas. 3) The overall land resource carrying capacity of the Xilin Gol grassland transects was in a surplus state, but the land carrying capacity of typical grassland pastoral area was higher than the two other types of areas. This study provides an empirical reference for the sustainable development of regional food nutrition.  相似文献   

顾及地类转换差异的城市空间扩展元胞自动机模型及应用研究     

于明明  曾永年 《地球信息科学学报》2018,20(1):48-56

元胞自动机模型已经成为城市空间扩展模拟研究的重要方法之一,并得到广泛应用。然而,现有的城市扩展元胞自动机模型仍存在不足。由于元胞状态设置较为简单,从而使模型转换规则中对不同用地类型向城市用地转换的差异与强度考虑不够。基于此本文在元胞自动机模型的框架下,设计了多元结构的元胞状态及转换规则,提出了顾及地类转换差异与强度的城市扩展元胞自动机模型。在计算非城市用地向城市用地转换的转换概率时,该模型考虑了3个方面的概率：① 地形地貌、经济发展等城市发展的驱动因素对城市用地扩展的影响概率,该概率采用logistics方法进行计算;② 邻域元胞的用地类型对中心元胞转换概率的影响,该概率采用扩展摩尔型方法进行计算;③ 不同类型的非城市用地（本研究中包括耕地、林地和裸地3种类型）向城市用地转换的强度,该概率由模拟基期土地利用数据与目标年份土地利用数据的叠加,得出不同类型的非城市用地在此时间段内向城市用地转换的规模,进而确定不同类型的非城市用地向城市用地转换的强度。最后,将以上3种概率的乘积作为元胞转换的概率。通过转换概率与转换阈值的对比判断中心元胞是否在下一个阶段转换为城市用地。经过迭代计算,不断增加城市用地元胞的数量。当模拟城市用地的结果与目标年份的城市用地规模差值在一定的范围内时停止模拟,得出最终结果。模型构建完成后,本文以长株潭城市群核心区为例进行了模拟实验。以2001年该地区的土地利用数据为基期数据,模拟2010年该地区的城市用地规模和空间分布。研究结果表明,根据本文提出的模型模拟的城市扩展结果与真实数据相比具有较高的一致性。模拟结果正确率达到68.66%,比基于传统logistics回归的元胞自动机模型的模拟精度提高了4.25%,Kappa系数为0.675。该模型较好地模拟了长株潭城市群核心区城市扩展,在城市空间扩展模拟中具有较好的适应性与有效性。  相似文献   

弧形海岸裂流的数值模拟研究   总被引：3，自引：0，他引：3  

汪鸿  朱首贤  李训强  张文静  聂屿 《海洋学报(英文版)》2018,37(3):21-30

弧形海岸波浪产生的裂流严重危害人类活动，但是目前对其特征缺乏充分认识。本文对Haller物理模型实验和三亚大东海的数值模拟表明FUNWAVE模式具有较好的裂流模拟能力。基于该模式进行了多种弧形海岸条件的裂流数值模拟，给出裂流的一些特征：（1）海岸弯曲度增大，裂流增强；（2）海岸坡度对裂流有比较大的影响，太陡或太平缓的海岸不利于形成裂流；（3）海岸尺寸减小，裂流减弱；（4）波高和波周期增大，裂流增强，但是对于某些海岸而言，0.4m波高可能就存在危害比较大的裂流。  相似文献   

基于ROMS和4DVAR的沿轨与网格化SSH数据同化效果评价   总被引：1，自引：1，他引：0  

周超杰  丁效华  张杰  杨俊刚  马强 《海洋学报(英文版)》2018,37(9):50-58

Remote sensing products are significant in the data assimilation of an ocean model. Considering the resolution and space coverage of different remote sensing data, two types of sea surface height(SSH) product are employed in the assimilation, including the gridded products from AVISO and the original along-track observations used in the generation. To explore their impact on the assimilation results, an experiment focus on the South China Sea(SCS) is conducted based on the Regional Ocean Modeling System(ROMS) and the four-dimensional variational data assimilation(4 DVAR) technology. The comparison with EN4 data set and Argo profile indicates that, the along-track SSH assimilation result presents to be more accurate than the gridded SSH assimilation, because some noises may have been introduced in the merging process. Moreover, the mesoscale eddy detection capability of the assimilation results is analyzed by a vector geometry–based algorithm. It is verified that, the assimilation of the gridded SSH shows superiority in describing the eddy's characteristics, since the complete structure of the ocean surface has been reconstructed by the original data merging.  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

轨道交通沿线土地溢价归公的政策与实践——以东莞市为例     

林雄斌  余筱琪  陈伟劲 《热带地理》2019,39(5):732-741

轨道交通周边土地开发和溢价归公有助于缓解城市财政压力,推动公交都市建设。结合国外实施溢价归公的政策和实践模式,以东莞市为例,在资料收集、政策分析、文本和案例解读的基础上,探讨了中国城市政府在规划和建设轨道交通中,以土地溢价归公反哺轨道交通融资的政策安排和实施效果。结果表明：1）溢价归公的本质是以特定方式实现正外部效应的内部化,由于土地制度和税收体系的差异,欧美地区溢价归公主要依赖多样化的土地税收体系,而中国城市的实践主要借鉴了“轨道+物业”的联合开发模式;2）东莞市溢价归公策略的形成是综合开发规划编制和审批、沿线土地控制和储备、土地发展权转移、土地增值分配等核心环节有效协调的结果;3）东莞轨道交通沿线土地开发能形成可观的财政收益,潜在土地收益占轨道资金总需求的比例超过20%,但在实施过程中仍面临较大困难。东莞市案例能为其他城市轨道交通融资、土地开发和溢价归公的政策体系编制和有效实施提供一定的参考。  相似文献   

渤、黄海生态环境模拟的参数敏感度空间差异分析     

罗辰奕  聂红涛  张海彦 《海洋学报》2019,41(8):85-96

随着海洋生态系统模型的发展，生态变量增多，众多生物过程参数量值的确定成为制约生态环境模拟的瓶颈问题，生态系统结构区域性要求模型中的生态参数具有区域差异。为探究不同海区的关键参数及参数敏感度的空间差异，本研究在渤、黄海建立了ROMS-CoSiNE物理–生物耦合的高分辨率生态系统模型，并对13种生态参数的敏感度空间分布进行分析。结果表明:南黄海中部与渤海及近岸海域的敏感度差异较大。渤海敏感度最大的参数为决定光合速率的浮游植物P-I曲线初始斜率，其次为浮游动物捕食半饱和常数和浮游动物最大捕食率。而南黄海中部敏感度最大的参数为浮游动物最大捕食率，其次为浮游植物死亡率和浮游植物P-I曲线初始斜率。结合敏感度分布及浮游植物生物量收支得出，渤海水体透明度较南黄海偏低、浮游植物生长光限制较强，是引起浮游植物P-I曲线初始斜率敏感度在渤海高于黄海的主要原因。浮游动物最大捕食率及浮游植物死亡率的敏感度空间差异，受渤、黄海浮游植物生物量差异的影响，与生态系统中的高度非线性特征有关。  相似文献   

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials          下载免费PDF全文

Chao Jiang  Gao‐Feng Zhao 《国际地质力学数值与分析法杂志》2018,42(4):674-693

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.  相似文献   

湿地水文过程与植被响应研究进展与案例分析     

徐力刚  赖锡军  万荣荣  王晓龙  李相虎 《地理科学进展》2019,38(8):1171-1181

生态水文学是20世纪90年代兴起的一门研究生态过程和生态格局水文机制的新学科。湖泊湿地作为中国5大类天然湿地类型之一,湖泊湿地生态水文学的研究业已成为生态水文学的研究的一个重要对象和分支,其核心在于研究湖泊湿地生态系统中多时空尺度的水文与生物格局、过程的耦合特征及其相互作用。论文首先概述了湖泊湿地生态水文学的研究进展,包括其基本理论,内涵、外延及其主要研究内容;凝练了湖泊湿地生态水文学研究的方法体系、思路及框架;针对目前湖泊湿地生态水文学研究中存在的问题及薄弱环节,提出了湖泊湿地生态水文学未来研究的发展趋势和亟需加强研究的重点方向。在此基础上,以长江中游的典型通江湖泊湿地——鄱阳湖湿地为例,通过开展的湖泊湿地生态水文过程与模拟研究的典型案例,阐述了鄱阳湖湖泊湿地生态水文过程的变化及其植被响应研究的最新进展和研究成果。论文对于构建涵盖湖泊湿地水资源、湖泊湿地生态景观格局与流域管理、湖泊湿地生物多样性保育以及湿地资源可持续利用与生态管理等方向在内的战略研究体系,完善湿地生态水文研究与流域生态与管理的技术支撑体系具有重要的指导意义和实践价值。  相似文献