饱和岩石的各向异性及非线性黏弹性响应   总被引：25，自引：2，他引：25       下载免费PDF全文

席道瑛  刘斌  田象燕 《地球物理学报》2002,45(1):109-118

在MTS伺服压机上对不同饱和状态的砂岩、大理岩标本进行了垂直层理和平行层理两个方向的正弦波加载试验,研究了饱和岩石的各向异性及非线性黏弹性行为. 在最大载荷低于岩石的屈服点时,获得的衰减、杨氏模量、泊松比、波速都表现出显著的各向异性,同时它们还具有较明显的应变振幅效应和频率效应. 随着应变振幅的增大,衰减近似呈线性增长,杨氏模量和泊松比近似呈线性下降. 在0.005-4Hz频段内除衰减不明显依赖频率以外,杨氏模量、泊松比、波速对频率的依赖性都较强; 当频段扩大到15Hz时,这4个参数都表现出较强的频率效应. 饱和岩石的衰减、杨氏模量、泊松比、波速均随饱和液体的黏滞系数增大而增大.  相似文献   

Strain partitioning and preservation of Ar/Ar ages during Variscan exhumation of a subducted crust (Malpica–Tui complex, NW Spain)     

J. Rodr&#x;&#x;guez  M.A. Cosca  J.I. Gil Ibarguchi  R.D. Dallmeyer 《Lithos》2003,70(3-4):111-139

The Malpica–Tui complex (NW Iberian Massif) consists of a Lower Continental Unit of variably deformed and recrystallized granitoids, metasediments and sparse metabasites, overridden by an upper unit with rocks of oceanic affinities. Metamorphic minerals dated by the ⁴⁰Ar/³⁹Ar method record a coherent temporal history of progressive deformation during Variscan metamorphism and exhumation. The earliest stages of deformation (D1) under high-pressure conditions are recorded in phengitic white micas from eclogite-facies rocks at 365–370 Ma. Following this eclogite-facies peak-metamorphism, the continental slab became attached to the overriding plate at deep-crustal levels at ca. 340–350 Ma (D2). Exhumation was accompanied by pervasive deformation (D3) within the continental slab at ca. 330 Ma and major deformation (D4) in the underlying para-autochthon at 315–325 Ma. Final tectonothermal evolution included late folding, localized shearing and granitic intrusions at 280–310 Ma.

Dating of high-pressure rocks by the ⁴⁰Ar/³⁹Ar method yields ages that are synchronous with published Rb–Sr and Sm–Nd ages obtained for both the Malpica–Tui complex and its correlative, the Champtoceaux complex in the French Armorican Massif. The results indicate that phengitic white mica retains its radiogenic argon despite been subjected to relatively high temperatures (500–600 °C) for a period of 20–30 My corresponding to the time-span from the static, eclogite-facies M1 peak-metamorphism through D1-M2 eclogite-facies deformation to amphibolite-facies D2-M3. Our study provides additional evidence that under certain geological conditions (i.e., strain partitioning, fluid deficiency) argon isotope mobility is limited at high temperatures, and that ⁴⁰Ar/³⁹Ar geochronology can be a reliable method for dating high pressure metamorphism.  相似文献   

Deformation at Stromboli volcano (Italy) revealed by rock mechanics and structural geology     

A Tibaldi  C Corazzato  T Apuani  A Cancelli 《Tectonophysics》2003,361(3-4):187-204

We approach the reconstruction of the recent structural evolution of Stromboli volcano (Italy) and the analysis of the interplay between tectonics, gravity and volcanic deformation. By tying together structural, lithostratigraphic and rock mechanics data, we establish that since 100 ka BP, the edifice has faulted and jointed mainly along NE-striking planes. Faults mostly dip to the NW with normal displacement. Taking also into account the presence of a NW-trending regional least principal stress and of tectonic earthquake hypocenters inside the cone, we suggest that this fracturing can be related to the transmission of tectonic forces from the basement to the cone. Dyking concentrated along a main NE-trending weakness zone (NEZ) across the volcano summit, resembling a volcanic rift, whose geometry is governed by the tectonic field. In the past 13 ka, Stromboli experienced a reorganisation of the strain field, which was linked with the development of four sector collapses affecting the NW flank, alternating with growth phases. The tectonic strain field interplayed with dyking and fracturing related to unbuttressing along the collapse shoulders. We propose that tectonics control the geometry of dykes inside the cone and that these, in turn, contribute to destabilise the cone flanks.  相似文献   

Layer parallel shortening in salt-detached folds: constraint on cross-section restoration     

M. Sans  J. Vergs  E. Gomis  J. M. Pars  M. Schiattarella  A. Trav  F. Calvet  P. Santanach  A. Doulcet 《Tectonophysics》2003,372(1-2):85-104

Cleavage-fissility perpendicular to bedding is a common feature in the external part of fold-and-thrust belts. Three techniques were used to determine the internal distortion in the frontal Southern Pyrenees: the analysis of strain markers such as burrows and rain drops, the measurement of fissility, and the measurement of anisotropy of magnetic susceptibility (AMS). The comparison of the three techniques showed a good fit although they differ in sensitivity to penetrative strain variations in the range of deformation values explored in the study case. On the regional scale, the values of layer parallel shortening (LPS) derived from the markers analysis are very constant and account for 16–23% of shortening. These values are two to three times larger than the shortening values calculated from the restoration of the macroscopic scale structures and indicate a good decoupling above the Cardona salt Formation. This study permitted an accurate restoration of the low-amplitude el Guix detached anticline.  相似文献   

昆仑山口西MＳ＝8．1级地震的形变应变场研究   总被引：7，自引：1，他引：7       下载免费PDF全文

郭良迁  张祖胜  李延兴  王敏  薄万举 《地球物理学报》2004,47(6):1068-1075

根据昆仑山口西8．1级地震前后GPS测点的位移速率，用弹性模型公式计算了地壳应变参数．应变参量的变化表明，震前在地震区附近以压应变为主，应变速率较大．位移速率矢量显示出震前的震中地区相对周围为活动性较弱的“稳定”地区．地壳的形变和应变揭示出孕震体在挤压状态下积累了较高的应变势能．8．1级地震的同时期由于地壳释放了巨大的应变能而应变速率变化显著．计算结果表明，地震所产生的应变达到4．5×10-6以上．发震断裂带的平均左旋走滑量是3．31m（89°E～96°E）．  相似文献   

Laboratory and case studies of thermal cycling and stored strain on the stability of selected marbles     

John M. Logan 《Environmental Geology》2004,46(3-4):456-467

Studies of marble panels from the exterior of two buildings document the processes leading to bowing of the material. Bowing of panels is most extensive in those areas that are exposed to direct or reflected thermal energy. The thermal anisotropic behavior of calcite results in grain-boundary separation, grain sliding and microfracturing. The resulting loss of strength is one factor leading to bowing. The development of bows further reduces the panel strength as the outer portions elongate by inelastic deformation mechanisms. Laboratory experiments cycling marble samples for over 200 cycles at three temperatures up to 107°C above room conditions show similar strength losses as the natural situation. The second factor contributing to the bowing process is the release of residual elastic strain. The strain is in part stored in the marble from its geologic history, but may also be accumulated during thermal cycling due to the properties of calcite. Marble panels have been found to bow when stored outside, but not attached to any framework, indicating that the release of residual strain is a critical factor in producing the bows.  相似文献   

Spatial correlation of deformation and mineral reaction in experimentally deformed plagioclase–olivine aggregates     

A.A. de Ronde  R. Heilbronner  H. Stünitz  J. Tullis 《Tectonophysics》2004,389(1-2):93-109

Shear deformation of hot pressed plagioclase–olivine aggregates was studied in the presence and absence of mineral reaction. Experiments were performed at 900 °C, 1500 MPa, and a constant shear strain rate of 5×10⁻⁵ s⁻¹ in a solid medium apparatus. Whether the mineral reaction between plagioclase and olivine takes place or not is controlled by choosing the appropriate plagioclase composition; labradorite (An₆₀) does not react, anorthite (An₉₂) does. Labradorite–olivine aggregates deformed without reaction are very strong and show strain hardening throughout the experiment. Syndeformational reaction between olivine and anorthite causes a pronounced strain weakening. The reaction produces fine-grained opx–cpx–spinel aggregates, which accommodate a large fraction of the finite strain. Deformation and reaction are localised within a 0.5-mm-wide sample. Three representative samples were analysed for their fabric anisotropy R* and shape-preferred orientation α* (fabric angle with the shear plane) using the autocorrelation function (ACF). Fabric anisotropy can be calibrated to quantify strain variations across the sheared samples. In the deformed and reacted anorthite–olivine aggregate, there is a strong correlation between reaction progress and strain; regions of large shear strain correspond to regions of maximum reaction progress. Within the sample, the derived strain rate variations range up to almost one order of magnitude.  相似文献   

Structural properties of (Mn1-x Fe x )Nb2O6 columbites from X-ray diffraction and IR spectroscopy     

S. C. Tarantino  M. Zema  F. Maglia  M. C. Domeneghetti  M. A. Carpenter 《Physics and Chemistry of Minerals》2005,32(8-9):568-577

A suite of (Mn_1-x Fe _x )Nb₂O₆ (x=0, 0.05, 0.25, 0.50, 0.75, 1) columbite samples has been prepared by solid-state reaction from oxides. X-ray diffraction and spectroscopic investigations have been carried out in order to gain different perspectives on how the solid solution adapts at different length scales to cation mixing. X-ray powder diffraction and powder absorption IR spectroscopy data are presented. The powder diffraction data show that there is no significant excess volume of mixing on the Fe–Mn columbite join. All the unit-cell parameters decrease linearly as a function of increasing Fe content. Substitution of Fe²⁺ for the larger Mn²⁺ cation causes a decrease in the volume of the A polyhedron, which also becomes more regular with respect to both bond-length and edge-length distortion parameters. No significant variation of the B site has been observed. Wavenumber shifts of the IR peaks nearly all vary linearly with composition, consistent with linear variations of the lattice parameters. Line broadening has been quantified by autocorrelation analysis of the IR spectra. This is interpreted as suggesting that there is some element of local strain or positional disorder at the length scale of second or third nearest neighbours around sites occupied by Fe.  相似文献   

The development of subgrain misorientations with strain in dry synthetic NaCl measured using EBSD   总被引：1，自引：0，他引：1  

G.M. Pennock  M.R. Drury  C.J. Spiers 《Journal of Structural Geology》2005,27(12):2159-2170

The development of subgrain boundary misorientations with strain in dry, synthetic NaCl polycrystals, deformed at elevated temperature, has been investigated using electron backscattered diffraction (EBSD). At low natural strains, up to 0.5, average misorientations of subgrain boundaries increase with strain and a power law relationship exists between strain and average misorientations. The average misorientations are strongly influenced by grain orientation, suggesting that the misorientation–strain relationship may also be texture dependent in materials with high plastic anisotropy, like NaCl. A slight grain size dependency of the average misorientations was observed. The results indicate that with suitable calibration, average subgrain boundary misorientations may offer a method for estimating the strain accommodated by dislocation creep in NaCl and thus perhaps in other geological materials, although current theories for polycrystalline plasticity imply that misorientations may also depend on stress in some situations.  相似文献   

Short-lived polyphase deformation during crustal thickening and exhumation of a collisional orogen (Ribeira Belt,Brazil)     

《Journal of Structural Geology》2016

The Ribeira Belt (Brazil) is a Neoproterozoic collisional-related feature that was located in a south-central position in West Gondwana. We present quantitative data on finite strain, flow vorticity and deformation temperatures for the Curitiba Terrane, a major segment of the southern Ribeira Belt. Six deformation phases (D₁-D₆) related with crustal thickening and exhumation were recognized. D₁ and D₂-related microstructures are preserved exclusively within porphyroblasts, in part grown during stages of high-pressure (∼9–12 kbar) isobaric heating after crustal thickening. D₃ phase was active from peak metamorphism attained in contrasting crustal levels (810–400 °C), to the early stage of exhumation (500–400 °C), as indicated by petrological, microstructural and quartz c-axis fabric evidence. Kinematic vorticity results indicate that the SL₃ mylonitic fabric resulted from a simple shear-dominated deformation related with westward thrusting. North-verging overturned D₄ folds with E-W-trending subhorizontal axes derived from a pure shear-dominated deformation. Regional D₅ open folds with subvertical axes and NNE-SSW-trending traces were produced by indentation tectonics. D₆ phase comprises retrograde orogen-parallel transcurrent shear zones related with scape tectonics. Geochronological data indicate that D₃-D₆ phases occurred between 584 and 580 Ma, suggesting a fast exhumation rate of ∼8 mm/year for the deepest rocks from the southern Ribeira Belt.  相似文献