Modelling forest snow processes with a new version of WaSiM     

Kristian Förster  Jakob Garvelmann  Gertraud Meißl  Ulrich Strasser 《水文科学杂志》2013,58(10):1540-1557

ABSTRACT

We present a new model extension for the Water balance Simulation Model, WaSiM, which features (i) snow interception and (ii) modified meteorological conditions under coniferous forest canopies, complementing recently developed model extensions for particular mountain hydrological processes. Two study areas in Austria and Germany are considered in this study. To supplement and constrain the modelling experiments with on-site observations, a network of terrestrial time-lapse cameras was set up in one of these catchments. The spatiotemporal patterns of snow depth inside the forest and at the adjacent open field sites were recorded along with snow interception dynamics. Comparison of observed and modelled snow cover and canopy interception indicates that the new version of WaSiM reliably reconstructs the variability of snow accumulation for both the forest and the open field. The Nash-Sutcliffe efficiency computed for selected runoff events in spring increases from ?0.68 to 0.71 and 0.21 to 0.87, respectively.  相似文献   

The marine controlled source electromagnetic response of a steel borehole casing: applications for the NEPTUNE Canada gas hydrate observatory   总被引：1，自引：0，他引：1  

Andrei Swidinsky  R. Nigel Edwards  Marion Jegen 《Geophysical Prospecting》2013,61(4):842-856

Gas hydrates are a potential energy resource, a possible factor in climate change and an exploration geohazard. The University of Toronto has deployed a permanent seafloor time‐domain controlled source electromagnetic (CSEM) system offshore Vancouver Island, within the framework of the NEPTUNE Canada underwater cabled observatory. Hydrates are known to be present in the area and due to their electrically resistive nature can be monitored by 5 permanent electric field receivers. However, two cased boreholes may be drilled near the CSEM site in the near future. To understand any potential distortions of the electric fields due to the metal, we model the marine electromagnetic response of a conductive steel borehole casing. First, we consider the commonly used canonical model consisting of a 100 Ωm, 100 m thick resistive hydrocarbon layer embedded at a depth of 1000 m in a 1 Ωm conductive host medium, with the addition of a typical steel production casing extending from the seafloor to the resistive zone. Results show that in both the frequency and time domains the distortion produced by the casing occurs at smaller transmitter‐receiver offsets than the offsets required to detect the resistive layer. Second, we consider the experimentally determined model of the offshore Vancouver Island hydrate zone, consisting of a 5.5 Ωm, 36 m thick hydrate layer overlying a 0.7 Ωm sedimentary half‐space, with the addition of two borehole casings extending 300 m into the seafloor. In this case, results show that the distortion produced by casings located within a 100 m safety zone of the CSEM system will be measured at 4 of the 5 receivers. We conclude that the boreholes must be positioned at least 200 m away from the CSEM array so as to minimize the effects of the casings.  相似文献   

Automatic techniques for 3D reconstruction of critical workplace body postures from range imaging data     

《ISPRS Journal of Photogrammetry and Remote Sensing》2013

The paper shows techniques for the determination of structured motion parameters from range camera image sequences. The core contribution of the work presented here is the development of an integrated least squares 3D tracking approach based on amplitude and range image sequences to calculate dense 3D motion vector fields. Geometric primitives of a human body model are fitted to time series of range camera point clouds using these vector fields as additional information. Body poses and motion information for individual body parts are derived from the model fit. On the basis of these pose and motion parameters, critical body postures are detected. The primary aim of the study is to automate ergonomic studies for risk assessments regulated by law, identifying harmful movements and awkward body postures in a workplace.  相似文献   

一种提高大比例尺航测精度的方法试验研究     

谢建春  潘宝玉  苏国中  林宗坚 《测绘科学》2013,38(5):5-7,21

针对现有规范关于1∶500与1∶1000平坦地形测图必须采用全野外高程控制测量的规定,本文的试验采用装载组合宽角相机的无人飞艇低空航测系统,通过空中三角测量内业方法,突破了此技术限制。文中详述了三个试验测区的地理状况,以及采用的控制网布设方法,尤其是新设计的标志点之优点。成果表明,用航测内业加密方法所成图的高程和平面精度均超过现有规范标准。说明利用无人飞艇低空航测系统可以实现1∶500和1∶1000测图的全部航测任务,符合"允许采用新技术以更高质量的成果突破现有规范限制"的规定。  相似文献   

双介质摄影测量共线理论研究     

钦桂勤  黄桂平  张永生 《测绘学报》2011,40(3):351-358

从摄影光学理论出发,推导摄影物镜成像系统的基点位置公式;利用针孔成像模型,分析得出摄影物镜的投影中心即为成像系统两节点的等效;简要阐述双介质摄影测量的传统观点,利用同一摄影物镜在不同介质中构成的光学系统,说明双介质摄影测量成像系统基点位置相对单介质时发生变化,并在此基础上提出与传统观点不同的看法——双介质摄影测量共线理...  相似文献   

一种浅水摄影测量水下相机的防护装置     

钦桂勤  范亚兵  蒋理兴 《测绘科学》2011,36(4):131-133

本文为摄影机和目标物均在水中的水下摄影测量设计了一种适用于浅水的水下摄影测量相机防护装置,并详细介绍了该装置的结构组成、安装和卸载步骤以及该装置的特点和使用注意事项,最后用本文研制的相机水下防护装置对一小天线进行水下试验,实验结果与空气中测量的结果高度一致.  相似文献   

数字天顶摄影仪确定垂线偏差及其精度分析     

郭金运  宋来勇  常晓涛  刘新 《武汉大学学报(信息科学版)》2011,36(9):1085-1088,1101

给出了数字天顶摄影仪的基本结构和垂线偏差测量的基本算法,结合仪器和测量过程,分析了垂线偏差测量误差。数字天顶摄影仪的自动化程度和测量精度都高于传统的天文大地测量。  相似文献   

DLT方法在遥感相机几何定标中的应用     

郑逢杰  余涛  陈兴峰  谢东海  袁国体  兰进京 《测绘与空间地理信息》2011,34(2):26-29

为建立适用于遥感相机定标的实验室,需要有几何标定的算法和软件对摄影图像进行计算.使用近景摄影测量中基于3维控制场的定标方法,对单CCD四波段遥感相机进行了几何定标,研究并自主编程实现了直接线性变换DLT(Direct Linear Transformation)算法,与基于空间后方交会算法的定标结果进行了精度对比.结论...  相似文献   

六合体应变干扰因素与地震短临异常特征研究   总被引：1，自引：0，他引：1       下载免费PDF全文

郑江蓉  徐徐  王俊  江昊琳 《地震工程学报》2011,33(1):84-90

利用江苏省南京市六合地震台钻孔体应变2003年1月1日至2008年12月31日的数字化观测资料,对气压和降雨这二种主要干扰因素的基本变化规律进行分析,讨论了发生在该台预报效能范围内的3次中强地震的短临异常特征.结果表明:气压变化在各个季节对观测值均有较大的影响,以短周期的正相关干扰影响为主,在时间上往往表现为准同步,相关系数能达到0.6～0.7以上;降雨对体应变的影响与降雨过程、降雨量及降雨时间等有密切的关系,持续降雨只有积累到一定程度才能促成固体潮畸变,这一过程虽较复杂,但仍有一定的规律可循.六合体应变对区域内中强地震有1～2月的突出短临异常变化.  相似文献   

青海省钻孔应变资料典型干扰特征分析   总被引：1，自引：0，他引：1  

马震  杜娟  马玉虎 《高原地震》2011,23(1):53-58

分析了青海省境内6套YRY-4型分量钻孔应变仪观测资料的可靠性,详细研究了每套资料的干扰因素及特征,结果认为地下水和气压等因素是YRY-4型分量钻孔应变仪的主要干扰因素,但由于各观测点气候及地质水文条件的不同造成了干扰程度的差异.  相似文献