Ultimate strength of ship hulls under torsion     

Jeom Kee Paik  Anil K. Thayamballi  P. Terndrup Pedersen  Young Il Park 《Ocean Engineering》2001,28(8):51

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical analyses, it is shown that the influence of torsion induced warping stresses on the ultimate hull girder bending strength is small for ductile hull materials while torsion induced shear stresses will of course reduce the ship hull ultimate bending moment.  相似文献   

Standard facies models to incorporate all heterogeneity levels in a reservoir model     

D. Mikes  C.R. Geel 《Marine and Petroleum Geology》2006,23(9-10):943-959

The construction of reservoir models is frustrated by the fact that core and well cover only a fraction of the reservoir volume and it is therefore difficult to determine features like facies shape, -size, and -distribution, inter- and intra-facies boundaries and lateral trends from them. These features are, however, critical to fluid flow and they should necessarily be incorporated in the reservoir model and we therefore propose to systematically describe geometry and distribution of facies. To this end we make use of “standard facies models” that a priori contain all elements and boundaries of facies for a number of typical depositional environments.  相似文献   

Seasonal Variation in the Biomass of Marine Macrophyta from Greek Coasts     

S. Haritonidis    G. Nikolaidis  I. Tsekos 《Marine Ecology》1986,7(4):359-370

Abstract. The marine plant communities of the littoral zone in different biotopes of the Greek coasts were investigated in 1980-81. Seasonal distribution and variation of marine plant biomass were assessed. The communities of Cystoseira crinita and C. compressa were outstanding with maximum biomass during the summer months. Corallina officinalis and Pterocladia capillacea + Viva rigida communities predominated with maximum biomass in autumn and exhibited a decrease in winter, except in stressed biotopes. The species diversity and productivity of seaweeds along the Greek coasts are interpreted in relation to a number of environmental parameters.  相似文献   

Baroclinic Buoyancy-Inertia Joint Stability Parameter     

Hideo Kawai 《Journal of Oceanography》2005,61(2):235-246

At present, the barotropic buoyant stability parameter has been derived from a vertical virtual displacement of a water parcel. The barotropic inertial stability parameter in the eccentrically cyclogeostrophic, basic current field was derived in 2003 from a horizontal cross-stream virtual displacement of a parcel. By expressing acceleration of a parcel due to a virtual displacement, which is arbitrarily sloping within a vertical section across the basic current, in terms of natural coordinates, we derived the vertical component of baroclinic buoyant stability parameter B ₂ ², the horizontal component of baroclinic inertial stability parameter I ₂ ², the baroclinic joint stability parameter J ², its buoyant component B ² and its inertial component I ². B ² is far greater than I ₂ ², and when neglecting relative vorticity except for vertical shear, a downward convex curve of J ² plotted against the slope of a virtual displacement follows a trend of B ² curve. If a parcel displaces along a horizontal surface or an isopycnal surface, however, B ² vanishes, and J ² becomes equal to I ². Actual parcel is apt to displace not only along the bottom slope, but also along the sea surface and an isopycnal interfacial surface, which is approximately equivalent to an isentropic surface, preferred by lateral mixing and exchange of momentum. Such actual displacement makes B ² vanishing, and grants I ² an important role. The present analysis of I ² examining effects due to curvature and horizontal and vertical shear vorticities are useful in deepening our understanding of baroclinic instability in actual oceanic streams.  相似文献   

复合酶法制备鯷鱼活性寡肽的研究     

毋瑾超  朱碧英  胡锡钢  陈全震 《海洋学研究》2003,21(2):43-49

探讨了用复合酶法制备鱼是鱼活性寡肽及其氨基酸组成和相对分子质量分布情况。应用正交试验法研究了酶量、酶解温度、酶解时间对鱼是鱼蛋白质水解度和酶解液苦味的影响。结果表明,最佳酶解作用条件是:酶量为100u/mL;酶解温度为50℃;酶解时间为4h。此时的酶解液苦味较低,水解度可达62.81%。应用氨基酸分析仪和凝胶排阻高效液相色谱分析了该寡肽的氨基酸组成和相对分子质量的分布范围,其十肽以下的小肽占67.77%,氨基酸组成平衡,必需氨基酸含量丰富。鱼是鱼活性寡肽有望成为保健食品、医药等领域的新型高品质原料。  相似文献   

Body weight, sexual maturity, and spinal deformity in strains and families of Atlantic cod (Gadus morhua) at two years of age at different locations along the Norwegian coast     

Kolstad  K.; Thorland  I.; Refstie  T.; Gjerde  B. 《ICES Journal of Marine Science》2006,63(2):246-252

  相似文献   

模型沙干重度的变化规律及其在泥沙模型试验中的作用     

韩玉芳  陈志昌 《海岸工程》2003,22(1):1-7

模型沙干重度在动床模型试验中是影响起动流速比尺和冲淤时间比尺的重要参数，其随淤积历时、粒径变化、埋置深浅和加工方法的不同有着不同的变化规律。通过试验，结合已有的成果，对模型沙干重度受以上几种因素的影响进行了研究，并进一步分析了其变化规律在动床模型试验中的作用。  相似文献   

酶解鲐鱼蛋白制备低分子肽制品   总被引：6，自引：0，他引：6  

裘迪红  周涛  戴志远 《海洋学研究》2001,19(2):63-68

介绍了以鲐鱼为原料 ,采用双酶水解技术 ,制备高质量的低分子肽粉末制品的最佳工艺。对鲐鱼水解液 4种脱苦脱腥的方法进行了比较 ,认为活性碳脱除法既可脱腥 ,又可脱苦、脱色 ,是鲐鱼水解液脱苦脱腥较好的方法。经正交试验得其最佳组合 :每升水解液中活性碳的用量为 1 0 g;时间为 40 min;温度为 40℃。制品为一种淡黄色粉末 ,含有较多的二肽、三肽等低分子肽 ,氨基酸种类齐全 ,富含人体所需矿物质元素的高质量的食品原料。  相似文献   

池养长毛对虾体长与体重的关系   总被引：5，自引：0，他引：5  

王渊源  方丽珊 《台湾海峡》1996,15(1):25-31

本文报道池养长毛对虾体长在６．８－１２３．９ｍｍ范围内的体长与体重的关系。池养长毛对虾雌、雄群体的生长特点是雌虾快于雄虾。由雌雄混合、雌虾、雄虾群体的体重对体长的相关曲线都很接近。  相似文献   

沸石基储能基元的研究     

杨玉山  董发勤  段涛 《矿物岩石》2008,28(1):13-16

以酸活化沸石为载体,十二醇为储能工质.制备沸石基储能基元,并采用X射线衍射、红外光谱和差示扫描量热等对沸石基储能基元进行表征.结果表明:储能基元在2θ=22.50时的衍射峰变强,相变储能材料十二醇和沸石栽体之间仅仅是简单的嵌合关系.储能基元的相变温度有一定的降低,并且熔融峰变宽.  相似文献