黄河内蒙古段上覆水、悬浮物和底泥重金属特征及生态风险研究   总被引：24，自引：12，他引：12  

赵锁志  刘丽萍  王喜宽  李世宝  朱锁  郑萍  张青  张宝  蒙奎文 《现代地质》2008,22(2):304-312

系统地采集黄河内蒙古段上覆水、悬浮物和底泥样品,分析其中重金属元素的含量。采用地质累积指数法和潜在生态危害系数法,研究了黄河干流内蒙古段的上覆水、悬浮物和底泥的重金属沿程分布特征、污染程度和生态风险。分析结果显示:除了As元素,悬浮物中重金属元素含量总体上高于底泥中的含量。地质累积指数法评价结果表明:悬浮物和底泥属于无污染—中度污染,悬浮物总体上比底泥污染严重;潜在生态危害系数法评价结果表明:底泥和悬浮物中重金属的生态危害总体上属轻微状态;因此,生态风险指数法和地质累积指数评价结果基本一致。  相似文献   

基于光谱和纹理的SVM矿化蚀变信息提取研究   总被引：1，自引：0，他引：1       下载免费PDF全文

薛云  戴塔根  杨自安  邹林  刘江龙 《地质找矿论丛》2008,23(3):254-259

针对传统矿化信息提取方法单一,利用光谱或纹理、信息量相对较少、需要大量样本的缺陷,利用基于光谱和纹理的支持向量机(SVM)原理,建立矿化信息提取模型.选择青海泽库县析界日地区作为典型研究区.首先提取研究区光谱和纹理信息,选取训练样本;然后求解最优超平面,进而确定决策函数;最后泛化推广识别其他待识别的样本.通过所提取的遥感蚀变异常信息与重砂异常点叠加分析,叠加基本吻合;从野外实地验证来看,均发现了不同程度的矿化现象,并指出了5个重点异常区.  相似文献   

Interaction of copper with fatty acids in Soxhlet extraction and its influence     

Ming Jin  Yanqing Xia  Tianzhu Lei  Junli Qiu  Rui Zhang 《中国地球化学学报》2008,27(2):157-160

Treatment with metallic copper for the removal of elemental sulfur from bitumen extracted from sedimentary rocks or petroleum is the most widely used method. Little attention has been paid, however, to its disadvantages. It was observed that copper can interact with some polar organic substances during conventional sulfur removal, which can strongly influence the quantitative and qualitative determination of bitumen, as has been confirmed by interaction of long-chain fatty acids with copper. The copper soap generated was analyzed by element analysis, inductively coupled plasma optical emission spectrometry （ICP-OES）, thermal analysis （TG-DSC） and Fourier Transform Infrared spectroscopy （FFIR）. Mechanism of the interaction was investigated and elucidated. Our experimental results would necessitate improvement of the present method for sulfur removal and/or a search for a new one.  相似文献   

区域似大地水准面确定的最小二乘支持向量机方法     

范千  张宁 《测绘工程》2008,17(5)

支持向量机(SVM)是近年来发展起来的机器学习的新方法,它较好地解决小样本、非线性、高维数、局部极小点等实际问题.文中研究支持向量机的拓展算法--最小二乘支持向量机(LSSVM),并将其应用于确定大面积复杂似大地水准面.通过工程实例并与神经网络模型和二次曲面多项式拟合模型相比较,验证确定区域似大地水准面的LSSVM方法的有效性.  相似文献   

利用矿物方解石进行水体除磷实验研究   总被引：4，自引：0，他引：4  

许虹  张静  高一鸣 《地学前缘》2008,15(4):138-141

为探索解决水体富营养化问题的新方法,利用矿物方解石对含磷溶液进行了除磷实验。实验结果表明,方解石晶芽可以促进磷的沉淀,降低溶液磷浓度;其降磷效果与溶液初始磷浓度有关,初始磷浓度为1.2mg/L,除磷率为12.68%,初始磷浓度为3mg/L,除磷率为69.94%,初始磷浓度为5mg/L,除磷率为88.48%;同样,实验温度升高,可使方解石降磷效果明显提高。经透射电子显微镜测试,除磷沉淀物没有明显的晶质体特征。  相似文献   

动态最小二乘支持向量机学习算法     

邓兴升  花向红 《武汉大学学报(信息科学版)》2008,33(11):1122-1125

针对大样本集的训练问题和动态训练样本的模型更新问题,提出了动态最小二乘支持向量机学习算法.该算法充分利用已建好的模型,逐渐加入新样本,并可删除位于任何位置的非支持向量,避免了矩阵求逆运算,保证了算法的高效率.大坝变形及电离层延迟两个时间序列的预报实例表明,该算法具有计算时间短、预报精度高的特点.  相似文献   

About the specification of erosion flux for soft stratified cohesive sediments     

Georges Chapalain  Y. Peter Sheng  André T. Temperville 《Mathematical Geology》1994,26(6):651-676

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.  相似文献   

基于改进PSO-SVM的噪声稳健建筑物变形监测方法     

张建奇 《北京测绘》2021,35(2):166-171

对高层、超高层建筑物进行实时,高精度的变形监测对提前预防安全隐患,保证人民生命财产安全具有重要意义。建筑物变形作为一种典型的随机性和微弱性过程,噪声等误差的存在会影响从中提取有用的变形信息。针对该问题,提出一种改进粒子群(Particle Swarm Optimization,PSO)算法优化支持向量机(Support Vector Machine,SVM)的噪声稳健建筑物变形监测方法,利用改进PSO算法的全局搜索能力对SVM的核参数进行优化,提升预测精度的同时增强算法的噪声稳健性。基于实测数据的试验结果表明,相对于传统交叉验证SVM和小波方法,所提方法可以获得更高的变形预测精度,并且在低信噪比条件下优势更加明显。  相似文献   

随钻测录井地质导向二维分解实时绘图方法     

邵才瑞  原野  张福明  陈国兴  曹先军 《吉林大学学报(地球科学版)》2021,51(1):256-265

根据随钻测录井实时地质导向和大斜度、水平井评价成图技术需求，针对传统绘图方法存在的弊端，提出了将测录井信息、井眼轨迹和地质模型进行二维分解的实时绘图方法。针对二维分解绘图方法绘图时空复杂度较高的问题，给出了不同事件驱动下的局部实时计算和拷屏重绘算法，控制了对CPU和内存的消耗、提高了绘图效率，消除了实时绘图的闪烁和卡顿现象。应用实例表明，二维分解实时绘图方法能够实现大尺度随钻测录井地质导向图形的流畅、无卡顿实时绘图，可提高大斜度、水平井储层模型评价的刻画精度和时效。  相似文献   

Some breakage characteristics of ultra-fine wet grinding with a centrifugal mill     

Heechan Cho  Hoon LeeYeongwoo Lee 《International Journal of Mineral Processing》2006

A centrifugal mill is a high-power intensity media mill that can be used for ultra-fine grinding, employing centrifugal forces generated by gyration of the axis of the mill tube in a circle. The mill charge motion is quite different depending on the ratio of the gyration diameter to the mill diameter (G / D ratio), varying from a motion similar to that of a conventional tumbling media mill to that of a vibration mill. In this study, a centrifugal mill was constructed with an arrangement where the gyration diameter could be readily adjusted. The batch grinding characteristics of three different minerals (limestone, talc and illite) in water with dispersing agent were investigated at various G / D ratios. It was found that the optimum G / D ratio in terms of the specific energy consumption to give a desired fineness of product was different for the three minerals. This was due to their different reactions to the breakage mechanisms provided by the mill charge motion at varying G / D ratios. The size distributions became progressively narrower at increased grinding times, and particles finer than about 0.1 μm were not detected even for prolonged grinding times. Measurement of specific surface areas indicated that this was not due to an artifact of the size measurements by laser diffractometry. This implies that there is a limitation in which particles finer than 0.1 μm are not produced under the conditions tested in this type of mill, but further investigation is needed for experimental verification of this limit of comminution.  相似文献