Aseismic negative dislocation model and deformation analysis of crustal horizontal movement during 1999——2001 in the northeast margin of Qinghai-Xizang block     

张希 江在森王琪  张晓亮 《地震学报(英文版)》2003,16(4):395-403

Through numerical simulation for GPS data, aseism/c negative dislocation model for crustal horizontal movement during 1999-2001 in the northeast margin of Qinghai-Xizang block is presented, combined with the spatial distri-bution of apparent strain field in this area, the characteristics of motion and deformation of active blocks and their boundary faults, together with the place and intensity of strain accumulation are analyzed. It is shown that: a) 9 active blocks appeared totally clockwise motion from eastward by north to eastward by south. Obvious sinistral strike-slip and NE-NEE relative compressive motion between the blocks separated by Qilianshan-Haiyuan fault zone was discovered; b) 20 fault segments (most of them showed compression) locked the relative motion between blocks to varying degrees, among the total, the mid-east segment of Qilianshan fault (containing the place where it meets Riyueshan-Lajishan fault) and the place where it meets Haiyuan fault and Zhuanglanghe fault, more favored accumulation of strain. Moreover, the region where Riyueshan-Lajishan fault meets north boundary of Qaidam block may have strain accumulation to some degree, c) Obtained magnitude of block velocities and locking of their boundaries were less than relevant results for observation in the period of 1993-1999.  相似文献   

Movement and strain conditions of active blocks in the Chinese mainland   总被引：2，自引：0，他引：2  

李延兴  杨国华  李智  郭良迁  黄珹  朱文耀  符养  王琪  江在森  王敏 《中国科学D辑(英文版)》2003,46(Z2)

The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90oE is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2±1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1±0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8±1.3 mm/a in the central part of Altun fault and 9.8±2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau.  相似文献   

高填方路堤互锚式薄壁挡土墙土压力试验研究   总被引：1，自引：0，他引：1  

窦斌  梅利芳  范瑛  余天庆  杨凯华 《地质科技情报》2003,22(3):109-112

在山区修建高等级公路工程中，挡土墙结构广泛应用于高填方路堤工程。在提出一种新型互锚式薄壁挡土墙结构的基础上，通过埋设土压力盒的方法对该种挡土墙的结构型式进行了力学模型试验，并进行了模型土压力强度特性分析。试验及分析表明，该挡土墙结构成本低廉，施工方便，结构合理，可以应用于高填方路堤实际工程。  相似文献   

济阳坳陷稀土元素特征及其在物源对比中的应用   总被引：6，自引：1，他引：6  

陈庆春  吴智平李伟 《地质论评》2003,49(6):622-629

物源是控制沉积物中REE组成最主要的因素，济阳坳陷区岩石稀土元素特征表明：①济阳坳陷古生界与华北地台其他地区同时代地层岩石的REE分布特征具有极大的相似性，这体现了晚古生代济阳坳陷区所处的整个华北地台区为一稳定的克拉通沉积盆地，地层横向分布稳定，具有一致的物源和构造背景；②济阳坳陷古生界为中生界的物源，反映了济阳坳陷区由古生代稳定地台型沉积到中生代山间盆地沉积的转变，中生代洼陷区的沉积主要来自对附近凸起区古生代地层的剥蚀；③新生界样品与中生界样品的REE分布模式具有很大的相似性，从一个侧面反映了济阳坳陷中生代与新生代的构造格局的转变，中生代接受沉积的部分洼陷区至古近纪成为供给物源的凸起区。  相似文献   

利用卫星测高空间技术建立数字化海洋     

彭富清  张瑞华  石磐  夏哲仁  程芦颖 《测绘工程》2003,12(1):37-40

论述了卫星测高空间技术的主要特征、科学意义及其在军事和经济建设领域的重要价值，阐明了国内外测高卫星系统的发展现状及利用卫星测高空间技术建立数字化海洋所取得的成果，分析卫星测高目前的研究方向，提出了发展我国卫星测高空间技术以及利用该技术建立数字化海洋的一些建议。  相似文献   

Reliability based risk index for the design of reinforced earth structures   总被引：1，自引：0，他引：1  

Adnan A. Basma  Samer A. Barakat  Maher T. Omar 《Geotechnical and Geological Engineering》2003,21(3):225-242

The design methods currently used for earth reinforcement are mostly based on deterministic properties of both the soil and the construction materials used. Nowadays, however, the general trend is designing at a specific degree of reliability. This is even more true where the raw data such as soil properties exhibit significant variation. Deterministic solutions, in this case, may not suffice. Therefore, this paper will attempt to use probabilistic formulations thereby modifying the existing design procedure of reinforced earth retaining walls to account for uncertainties and variabilities. Through a first order Taylor's series expansion about the mean, the mean and variance of the strip reinforcing components, namely width and length, are derived in terms of the variations in the soil properties. Design charts that enable estimation of both mean and variance are developed to avoid extensive partial differentiation involved in the computations. Using appropriate probability distributions along with the mean and variance, the final design outputs are determined for a selected failure probability by introducing what is refered to as 'risk index'. The results indicate that the risk index increases with an increase in the coefficient of variations and a decrease in failure probability. Furthermore, it is shown that in some cases, depending on the variabilities of the soil properties, the classical design technique produced a relatively high failure probability. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

APPLICATION OF SOME MECHANICAL CONCEPTS TO STRUCTURAL GEOLOGY     

WUHongling WANGWei 《大地构造与成矿学(英文版)》2003,27(1):120-129

This paper discusses some mechanical concepts that have been largely applied to structural geology and tectonics, and addresses the problems and misunderstandings in use of these mechanical terms. The purpose is to stimulate the interests for structural geologists in using the mechanical principles and methods correctly to solve the geodynamic problems.  相似文献   

Layer parallel shortening in salt-detached folds: constraint on cross-section restoration     

M. Sans  J. Vergs  E. Gomis  J. M. Pars  M. Schiattarella  A. Trav  F. Calvet  P. Santanach  A. Doulcet 《Tectonophysics》2003,372(1-2):85-104

Cleavage-fissility perpendicular to bedding is a common feature in the external part of fold-and-thrust belts. Three techniques were used to determine the internal distortion in the frontal Southern Pyrenees: the analysis of strain markers such as burrows and rain drops, the measurement of fissility, and the measurement of anisotropy of magnetic susceptibility (AMS). The comparison of the three techniques showed a good fit although they differ in sensitivity to penetrative strain variations in the range of deformation values explored in the study case. On the regional scale, the values of layer parallel shortening (LPS) derived from the markers analysis are very constant and account for 16–23% of shortening. These values are two to three times larger than the shortening values calculated from the restoration of the macroscopic scale structures and indicate a good decoupling above the Cardona salt Formation. This study permitted an accurate restoration of the low-amplitude el Guix detached anticline.  相似文献   

深厚表土层地面注浆加固过程中井壁应变变化规律     

付厚利 《岩土力学》2003,(Z1)

分析了深厚表土层地面注浆加固过程中井壁的受力特点,介绍了金桥矿副井表土段地面注浆加固过程中井壁的应变观测结论,提出了深厚表土层井壁外注浆加固工程的井壁安全保证核心技术。  相似文献   

对目前岩石“全曲线”测试的若干看法   总被引：1，自引：0，他引：1  

马世民  马宇博 《岩土力学》2003,(Z1)

从电液伺服岩石压力试验机工作机理的角度,对目前岩石应力-应变全过程曲线(以下简称“全曲线”)测试中的一些问题进行了分析,提出了自己的看法,目的是为了解决“全曲线”测试的2个问题,即如何测出“全曲线”;如何使测出的“全曲线”真实反映岩石的力学特性,并将其用到工程中。  相似文献