首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90°E is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2 ± 1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1 ± 0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8 ± 1.3 mm/a in the central part of Altun fault and 9.8 ± 2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau.  相似文献   

2.
Current horizontal strain field in Chinese mainland derived from GPS data   总被引:3,自引:0,他引:3  
Introduction In the years when the reliable data could not be obtained and in the analysis of strain property and magnitude in history, the intensity, property and activity pattern of strain field were mainly inferred on the bases of geometric characters of surface traces and behaviors (especially the faults) as well as the characteristics of petrology (XIE, et al, 1993; Molnar, Tapponnier, 1975, 1977; Tapponnier, Molnar, 1977; FU, et al, 2000). However, they are the averaged results accumu…  相似文献   

3.
中国大陆现今实测地应力场的状态与板块构造环境、活动断裂带分布、地形地貌以及地壳结构呈现一定相关性. 在中国大陆西缘,印度洋板块与欧亚板块陆发生陆碰撞,在中国大陆东缘,菲律宾海板块、太平洋板块俯冲到欧亚板块之下. 中国大陆内部被大型活动断裂带分割为多个块体,各个块体的地壳结构和厚度呈不均匀分布,地形地貌起伏具有很大的差异. 笔者以中国大陆块体模型为基础,把板块构造作用和重力势作为主要影响地应力状态的两个主要要素,在现今活动构造、GPS和实测地应力等成果的约束下,利用线性黏弹体球壳有限元模拟分析了中国大陆现今地应力场的分布特征和控制因素. 结果表明: (1)构造应力场总体上呈现出西部挤压,东部拉张的特征,印度板块与欧亚板块的持续碰撞形成了青藏高原及其周缘的挤压性质的构造应力场,而东部菲律宾板块与太平洋板块的俯冲形成了黄海、东海和环渤海区域的拉张性质的构造应力场,中间为拉张环境和挤压环境的过渡,最大主应力的方向受到板块构造环境和活动构造分布的控制;(2)重力的影响主要体现在地形梯度大和地壳厚度结构变化大的地壳浅部区域,在藏南、滇西北局部地区的地壳浅部由于受到重力势控制,呈现为张性应力场,在塔里木地区由于重力势引起的应力场与构造应力场同为挤压性质,因此该区的挤压强度得以增加;(3)中国大陆浅部地应力场的状态主要受到区域板块构造环境、块体边界活动构造带的展布和地形的控制,总体上以南北构造带为界,西部以较强的压性构造环境为主,东部为较弱的压性构造环境,藏南和滇西北局部地区存在有张性构造环境;构造应力对地应力的贡献比重随着深度增加而增加;(4)采用黏弹性模型的构造应力场模拟结果比完全弹性模型的模拟结果能够更好地与实测地应力场相吻合,利用完全弹性模型分析由地震等诱发的地应力瞬时变化是有效的;(5)青藏高原东南缘最大主应力方向发生了较大的偏转,其主要控制因素有:印度板块持续的碰撞、中下地壳对上地壳拖曳以及印度板块通过实皆断裂对欧亚板块的剪切拉伸作用. 中国大陆现今地应力场是整个地壳岩石黏弹特性长期演化和断裂活动的结果,是地应力场动态演化过程中在现今时间点上的状态,受到板块构造环境、大陆内部活动断裂分布、地形地貌和地壳结构等因素不同程度的控制,模拟结果为中国大陆地应力场提供了一个定量的参考模型.  相似文献   

4.
中国西部及邻区活动地块边界带现代构造应力场   总被引:8,自引:1,他引:7       下载免费PDF全文
利用哈佛全球矩心矩张量解数据和许忠淮认为1920mdash;1999年可靠的中国大陆震源机制解数据, 反演了中国西部及邻区活动地块边界带上现代构造应力场.通过对FMSI反演程序多次的输入和检验, 得到了边界带上的应力场.边界带上最大主压应力sigma;1轴绝大多数近水平. 在90deg;E以西的中国西部大陆及邻区, sigma;1轴水平方向基本上为近SN向;在青藏高原的东北部, sigma;1轴水平方向基本上为近NE向;在青藏高原的东南部, sigma;1轴水平方向绕喜马拉雅构造东端顺时针方向旋转.最小主压应力sigma;3轴倾角呈两极分布,西域地块区内活动地块边界带和青藏地块区内东北缘部分段sigma;3轴倾角较陡, 而青藏地块区内sigma;3轴倾角近水平, 所以西域地块区和青藏地块区内东北部相对于其它大部分青藏地块区, 有更多的逆冲地震.应力场在同一个边界带具有非均匀性. 北天山带、南天山带、西秦岭mdash;德令哈带、岷山mdash;龙门山带和安宁河mdash;小江带的非均匀性相对要小一些, 西昆仑带、海原mdash;祁连带、东昆仑带、玛尼mdash;玉树带、澜沧江带和滇西西边界带的非均匀性相对要大, 而喀喇昆仑mdash;嘉黎带和喜马拉雅带的非均匀性最显著.由于震源机制解数据的限制, 本文给出的是边界带上部分段的应力场.   相似文献   

5.
中国大陆地壳应力场与构造运动区域特征研究   总被引:41,自引:16,他引:25       下载免费PDF全文
系统研究了1918~2006年间中国大陆及其周缘发生的3115个M4.6以上中、强地震的震源机制解,得到中国大陆地壳区域应力场的压应力轴和张应力轴空间分布的统计结果.探讨了大陆应力场的结构,以及周围板块运动对中国大陆应力场影响作用范围及其界线.结果表明,中国东部的华北地区受到太平洋板块向欧亚板块俯冲挤压的同时,又受到从贝加尔湖经过大华北直至琉球海沟的广阔范围内存在的方位为170°引张应力场的控制.华北地区大地震的震源机制解反映出,该区地震发生为NEE向挤压应力和NNW向张应力的共同作用结果.印度洋板块向欧亚板块的碰撞挤压运动所产生的强烈的挤压应力,控制了喜马拉雅、青藏高原、乃至延伸到天山及其以北的广大地区.在青藏高原周缘地区和中国西部的大范围内,压应力P轴水平分量位于20°~40°,形成了近北东方向的挤压应力场,大量逆断层型强震集中发生在青藏高原的南、北和西部周缘地区以及天山等地区. 本文结果表明,正断层型地震集中发生在青藏高原中部高海拔的地区.证明了青藏高原周缘区域发生南北向强烈挤压短缩的同时,中部高海拔地区存在着明显的近东西向的扩张运动.根据本文最新结果,得到了华北、华南块体之间地壳区域应力场的控制边界线,发现该分界线与大地构造、岩石圈板块构造图等有较大差异,特别是在大别及其以东地区, 该分界线向东南偏转,在沿海的温州附近转向东,最终穿过东海直至琉球海沟.台湾纵谷断层是菲律宾海板块与欧亚板块之间碰撞挤压边界,来自北西西向运动的菲律宾海板块构造应力控制了从台湾纵谷、华南块体,直到中国南北地震带南段东部地域的应力场. 地震震源机制结果还表明,南北地震带南段西侧其P轴大约为NNE方向,与青藏高原的P轴方位一致.南北地震带南段东侧其P轴大约为NWW方向,与华南块体的P轴方位一致.因此,将中〖JP2〗国大陆分成东、西两部分的南北地震带南段是印度洋板块与菲律宾海板块在中国大陆内部影响控制范围的分界线.  相似文献   

6.
Introduction The Chinese mainland is located in the southeastern part of Eurasia plate and encircled by India, Eurasia, Pacific and Philippine Sea plates. It is one of areas with the strongest tectonic de-formation, especially Qingzang (QinghaiXizang) plateau and NS tectonic zone where the tec-tonic activity is more intensive and intricate. The main part of tectonic activity of Chinese mainland includes a series of tectonic zones and active blocks divided by them. Therefore, the research…  相似文献   

7.
INTRODUCTIONInthe late 1980’s ,aninternational cooperation project in earth sciences ,the World Stress MapProject ,wasinitiated underthe World Lithosphere Program. Measurements andresearch achievementsof the present-daytectonic stress field worldwide were analyzed and sorted out .The project achievedgood results and based on them, a world stress database was set up,the world stress map wascompiled,andthe general andregional crustal stress patterns were discussed (Zoback,et al .,1989 ;…  相似文献   

8.
Introduction ZHANG and ZHONG (1977), ZHANG, et al (1978) and ZHANG (1984) pointed out that Chinese mainland is divided into two parts by the NS-trending tectonic belt, i.e., the eastern area and the western area, and each area is divided into tectonic blocks by faults. In the eastern area, the faults are trending NNE and NNW, mainly NNE, and the long axis strike of blocks is nearly trending NS. In the western area, faults are trending NEE and NWW, mainly NWW, long axis strike …  相似文献   

9.
中国现今地壳运动GPS速度场的连续变形分析   总被引:13,自引:2,他引:11       下载免费PDF全文
杨少敏  王琪  游新兆 《地震学报》2005,27(2):128-138
利用中国大陆以及蒙古、 缅甸、 印度、 尼泊尔和喜马拉雅等周边地区多年的GPS观测资料, 基于连续介质假设, 采用双三次样条函数模拟方法, 给出中国大陆整体水平位移速度, 拟合精度优于3 mm/a, 获得了中国大陆的水平应变率场, 并分析了中国大陆现今构造变形、 水平应变率场的空间分布特征. 结果表明: 对大范围、 密集的GPS速度场的连续变形分析, 既能揭示中国大陆现今构造变形的总体特征, 又能显示局部地区现今的构造活动特征. 总体上, 中国大陆构造的水平变形强度和变形速度在南北地震带产生突变, 呈西强东弱、 南强北弱态势. 而昆仑山地块中部、 鲜水河断裂带和云南中部地区, 其应变速率最大, 速度变化最快; 阿尔金断裂带现今处于其构造活动的平静期, 中天山东部地区具有拉张环境.   相似文献   

10.
李杰  刘代芹  王琪  王晓强  朱治国 《地震研究》2012,35(1):59-65,157
利用GPS数据研究南天山地区地壳运动特征,截取了该区域2005 ~ 2009年GPS数据,在统一框架下进行解算,并绘制出不同时段的主应变、剪应变以及基线变化速率等图像,研究表明该区域的地壳形变具有自西向东、自南向北减弱的特点,主压应变主要表现为受印度板块向北推挤而形成的近南北向压性应力场.2005~2009年基线变化速率表明,以喀什沿经线南北向为界,其东部区域基本上为压缩区,其西部区域基本上为拉张区,东部的基线缩短平均速率(4.84 mm/a)大于西部基线伸长的平均速率(3.06 mm/a),以喀什沿纬线东西向为界,其南部区域基线变化平均速率(5.58 mm/a)明显高于北部区域基线变化平均速率(3.52 mm/a),且伸长、压缩变化速率最大基线均在南部地区,说明南部区域受到塔里木块体和青藏高原挤压比较强烈,表明喀什南部区域地壳运动相对活跃.  相似文献   

11.
The middle part of the Tianshan Mountains in Xinjiang is located in the north-central part of the Tianshan orogenic belt, between the rigid Tarim Basin and Junggar Basin. It is one of the regions with frequent deformation and strong earthquake activities. In this paper, 492 MS>2.5 earthquake events recorded by Xinjiang seismograph network from 2009 to 2018 were collected. The MS3.5 earthquake was taken as the boundary, the focal mechanism solutions of the earthquake events in this region were calculated by CAP method and FOCEMEC method respectively. At the same time the focal mechanism solutions of GCMT recorded historical earthquake events in this region were also collected. According to the global stress map classification standard, the moderate-strong earthquakes in the region are mainly dominated by thrust with a certain slip component, which are distributed near the combined belts of the Tarim Basin, Junggar Basin, Turpan Basin and Yili Basin with Tianshan Mountains. The thrust component decreases from south to north, while the strike-slip component increases. The spatial distribution characteristics of the tectonic stress field in the middle section of the Tianshan Mountains in Xinjiang are obtained by using the damped regional-scale stress field inversion method. The maximum principal compressive stress in axis the study area rotated in a fan shape from west to east, the NW direction in the western section gradually shifted to NE direction, its elevation angle is nearly horizontal, in the state of near horizontal compression. The minimum principal compressive stress axis is nearly EW, and the elevation angle is nearly vertical. Influenced by large fault zones such as Kashi River, Bolhinur, Nalati, Fukang, the southern margin of the Junggar and the north Beiluntai, the local regional stress field presents complex diversity. Under the influence of the northward extrusion of Pamir and Tarim blocks, the whole Tianshan is shortened by compression, but its shortening rate decreases from south to north and from west to east, the stress shape factor increases gradually from west to east, the intermediate principal compressive stress axis exhibits a change in compression to extension. There are some differences in the characteristics of tectonic stress field between the north and south of Tianshan Mountains. The regional maximum principal compressive stress axis is 15° north by east on the south side, while it is nearly NS on the north side. The deformation of the Tianshan Mountains and the two basins on both sides is obviously larger than that in the inside of the mountain. Changes in the crustal shortening rate caused by the rotation of the rigid Tarim block and Junggar block to the relatively soft Tianshan block, as well as the uplifts of Borokonu and Bogda Mountains, the comprehensive influence of the material westward expansion constitute the stress field distribution characteristics of the north and south sides of the middle section of Tianshan Mountains. The recent two MS6.6 earthquakes in the region caused the regional stress field to rotate counterclockwise. The post-earthquake stress field and the main source focal mechanism solution tend to be consistent. The seismic activity in the study area is week in the south and strong in the north. The focal depth is about 20km. Most strike-slip earthquakes occur near the junction belt of the Tianshan and Junggar Basin.  相似文献   

12.
Introduction To correctly understand the tectonic deformation of continental lithosphere, its dynamical mechanics and seismic activity, we should firstly acquire the velocity field and strain field of lithospheric tectonic motion with fine resolution and consistent accuracy (Molnar and Lyon-Caen, 1989; Molnar, 1990). And the quality, distribution and density of observed data are the basis for studying crustal tectonic deformation. In the past, crustal deformation is usually determined indi-r…  相似文献   

13.
对中国大陆地壳水平变形的初步探索   总被引:13,自引:0,他引:13  
郭良迁 《中国地震》2000,16(2):126-134
根据全国GPS网1994和1996年两期观测资料的处理结果,讨论了中国大陆地区现阶段应变场和应力场。青藏亚板块的西部和东部张应变起主导作用,中部压应变占优势,主压应变方向为北北东向;青藏亚板块东南部东南段云南地区的主压应变方向为北西向,压应变和张应变量级相当。新疆亚板块的主压应役北北东向至北东向为主,应变量存在差别。华北亚板块的主压应变方向是北东至近东西向为主导,局部地段存在差别,大部分地区压应变  相似文献   

14.
中国大陆地壳水平运动速度场与应变场   总被引:1,自引:0,他引:1  
收集了中国大陆及周边地区GPS网的有关数据,提出了GPS网速度场的不同融合方法;经过融合建立了中国大陆及周边地区统一的地壳运动速度场,该速度场使用的有效GPS站共423个,其覆盖面积为1200万km^2;初步总结出中国大陆及周边地区地壳水平运动空间分布的基本特征;建立了板内块体的刚性弹塑性运动应变模型,对其进行了块体应变参数唯一性与速度残差中误差最小检验;根据中国大陆及周边地区的速度场,估计了8个块体的应变参数,分析了这些块体的应变状态,估计出的各个块体的应变状态与地质学、地球物理学方法估计的结果具有很好的一致性。用喜马拉雅块体主压应变方向估计的印度板块向欧亚板块碰撞力的主方向为北东7.1度。  相似文献   

15.
IntroductionSituated in the southeastern part of Eurasia Plate and surrounded by the India Plate, Eurasia Plate, Pacific Plate and Philippine Sea Plate, Chinese mainland especially the area of Qinghai-Xizang (Qingzang) Plateau and the south-north tectonic zone is the area with the most intensive neotectonic deformation. The main component of tectonic activity in Chinese mainland is active blocks. Therefore, it is quite important to study active blocks in the research of tectonic activit…  相似文献   

16.
The numerical dynamic model of Chinese mainland lithosphere's stress and strain field was constructed with elasto-viscous creep constitutive relation. The most recent data of the stress field of Chinese mainland and the horizontal movement velocity of the crust blocks were used as constraint conditions. The values of the boundary force were computed by trial-and-error method. The effect of the Qinghai-Xizang Plateau's excess potential energy to the movement of Chinese mainland was studied also in this model. The results of the numerical computing show that, recent rapid raising of the Qinghai-Xizang Plateau and the generation of normal faults in the southern part of the plateau resulted from the convergence of Indian Plate to the Eurasian Plate, and also from the rapid convective thinning of the lower lithosphere. Horizontal extension of the Qinghai-Xizang Plateau is the main dynamic factor to form the present tectonic framework of the Chinese mainland. The compressive loads on the eastern boundary of the model were mainly applied by the subduction of the Pacific Plate. The compression from the Philippine Plate maybe slight.  相似文献   

17.
川滇块体东边界主要断裂带现今运动特征分析   总被引:2,自引:1,他引:1       下载免费PDF全文
基于2009年以来的GPS观测数据,利用块体模型和GPS剖面方法分别计算川滇块体东边界主要断裂带的滑动速度,并结合跨断裂带的区域应变时间序列分析断裂带现今的运动特征。结果表明:从速度场变化来看,2013—2015期的速度场在川滇块体东北部有东向增加的微弱变化;从滑动速率结果来看,鲜水河北段的左旋走滑运动有所增强,拉张运动有所增加;小江断裂带的左旋走滑运动普遍有微弱的增强;从去掉线性的区域应变时间序列结果来看,小江断裂带南段主张应变在2014年底出现了趋势性转折,值得进一步关注。  相似文献   

18.
研究了中国大陆地壳垂直运动的特征,提出利用中国大陆现代地壳垂直形变速率图划分活动地块的思路和原则,并把中国大陆划分为东西2个I级地块,东北、华北、华南、西藏、甘青藏和新疆6个Ⅱ级地块和16个Ⅲ级地块.本文划分的活动地块边界与新构造活动的图象在总体上是一致的,局部地区有些差别.这表明,中国大陆地壳现今活动是第四纪以来新构造活动的继续,但也出现了一些新的活动趋势.   相似文献   

19.
田建慧  罗艳 《地震》2019,39(2):110-121
本文收集了1976—2018年发生在中国大陆及其周边地区(15°~55°N, 65°~125°E)的4303个地震震源机制解, 分析了该区震源机制解和P、 T轴空间分布特征, 并使用这些震源机制解, 反演得到了中国大陆及周边地区二维构造应力场分布。 应力场反演结果表明, 云南大部、 青藏高原大部以及华北华南大部以走滑型应力性质为主, 印度洋板块与欧亚板块的强烈碰撞控制着中国西部地区, 大量的逆断型地震集中分布在青藏高原周缘和西域活动地块的天山地区。 青藏高原内部也存在正断型地震, 且应力场方向在26°N发生了很大的变化。 位于青藏高原东构造线以南的滇缅活动块体, 最大主压应力σ1方向在大致100°E发生突变, 由以西的NNE方向偏转到NNW方向。 中国东部的东北块体到华北块体再到华南块体, 最大主压应力方向有一个从NE向逐渐转变成EW向再变化到NW向的旋转趋势。 应力场总体结果表明, 中国东部应力场主要受到太平洋板块和菲律宾板块对欧亚大陆俯冲的作用, 中国西部主要受印度板块向北碰撞欧亚大陆的影响, 块体内部相互作用、 块体与断裂带相互作用也对应力场变化产生影响。  相似文献   

20.
华北地区近期地壳水平运动与应力应变场特征   总被引:49,自引:7,他引:42  
利用华北GPS监测网 1 992年、1 995年、1 996年的观测资料 ,应用最小二乘配置给出了华北地区相对水平位移场、应变场的分布图像 .经初步研究表明 :华北地区 1 992-1 995年间的水平位移和应变场表现为整体性不均匀的压性运动 ,1 995- 1 996年测区东部仍以水平压性运动为主 ,但测区西部则主要表现为张性运动 .水平运动 (方向、大小 )发生显著变化和应变高值区的地带主要位于块体边界带和主要断裂带附近 .燕山断块南边界的北东向断裂存在着较显著的左旋运动 .区内最大剪应变、面膨胀的高值区在天津、北京、唐山一带 .结合非连续变形数值分析方法 (DDA)初步分析认为 ,1 992- 1 995年GPS观测结果显示的华北地区存在东、西部构造应力作用的明显差别 ,华北东部以东西向压应力作用为主 ,而西部的南北向构造应力作用又明显大于东部 .  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号