甘肃省文县阳山金矿带控矿构造特征及找矿方向   总被引：2，自引：0，他引：2  

李建忠  刘洪波  张亿其  谢杰桥  皮吉波  杨福立 《四川地质学报》2008,28(1):13-17

阳山金矿带位于扬子板块、松潘一甘孜地块和南秦岭地块交接的文县弧形构造带内,矿体赋存于泥盆系中统三河口组浅变质碎屑岩建造中。矿床受地层、构造及岩浆活动共同控制,构造是最主要的控矿因素,控制了岩浆活动、成矿流体运移、矿体定位及形态产状和围岩蚀变的分布。  相似文献   

氧化锰矿物的生物成因及其性质的研究进展   总被引：5，自引：0，他引：5  

刘凡  冯雄汉  陈秀华  邱国红  谭文峰  贺纪正 《地学前缘》2008,15(6):66

土壤中的氧化锰矿物是原生矿物风化和成土过程的产物,是最具反应活性的一类矿物,决定着环境中许多物质的形态、迁移和转化,在元素生物地球化学循环中起着重要的作用,其形成机制和环境效应备受关注。已有的研究表明,环境中氧化锰的形成与微生物作用紧密相关,微生物作用可使自然环境中的Mn(Ⅱ)氧化速率提高105倍。参与Mn(Ⅱ)氧化的微生物在环境中广泛存在,已知的典型锰氧化细菌分布在变形菌门、放线菌门或厚壁菌门,它们均通过胞外聚合物中的多铜氧化酶来催化氧化Mn(Ⅱ)。细菌氧化Mn(II)成Mn(Ⅳ)是酶催化的两个连续的快速单电子传递过程,Mn(Ⅲ)在溶液中以与酶结合的瞬时中间态出现。生物形成氧化锰的最初形态为层状锰矿物,与δ-MnO2或酸性水钠锰矿很类似,且结晶弱,粒径小,锰氧化度高,结构中的八面体空穴多,因而比化学形成的氧化锰具有更强的吸附、氧化等表面活性。环境中Mn(Ⅱ)微生物氧化及形成的Mn(Ⅲ)中间体与碳、氮、硫等生命元素的地球化学循环的关系令人关注。  相似文献   

苏里格气田盒8气藏气水层测井识别研究     

朱亚东王允诚  童孝华张银德 《成都理工学院学报》2008,35(1):28-33

鄂尔多斯盆地苏里格气田盒8气藏为弹性驱动的河流相低效气藏,储层非均质性强,在开发中普遍见水。根据试采情况将气藏储层分为气层、水层、气水层三类,开展气、水层的测井识别研究。以区内26口井50个射孔层段各层的试油结果作为依据,选出了700个样本点作为判识建模的标本,以声波时差和中子孔隙度等8个原始测井值作为判识变量组合,采用模糊判别分析,建立了各层的判识模型。回判结果表明,模型对气层精度达到97％,水层为89％,气水层为94％。利用未参加建模的出水井射孔段对模型进行验证,判识结果基本符合实际情况,模型具有较高精度。  相似文献   

杭州湾岸线变迁与城市规划建设     

顾明光  龚日祥  卢成忠  秦祥熙  陈忠大 《上海国土资源》2008,(4):24-29

本文较系统地阐述了杭州湾沿岸平原第四纪地质与地貌特征,扼要分析了钱塘江与杭州湾岸线的变迁历史及其演变趋势。在此基础上,指出海平面持续上升带采的一系列环境问题是未来杭州湾海岸带面临的主要威胁,并对环杭州湾城市化发展规划提出了若干建议。  相似文献   

浙北双溪坞群的构造特征及地质意义   总被引：1，自引：0，他引：1  

竺国强  陈梓军 《高校地质学报》1996,2(1):58-64

本文在野外地质工作基础上,通过对双溪坞群的岩层对比和构造分析,认为本区的双溪坞群与上覆地层间在构造样式上的存在着较大差异。双溪坞群的章村组和北组具有相似的地质特征,为同一火山放心回的产物。神功运动使早期形成的双溪坞群褶皱造山,开怀 竖线型平臣褶皱构造,并受后期构造的叠加改造,形成轴向北东的叠加褶皱构造格局。  相似文献   

Large-scale rheomorphic shear deformation in Miocene peralkaline ignimbrite E,Gran Canaria     

Philip T Leat  Hans-Ulrich Schmincke 《Bulletin of Volcanology》1993,55(3):155-165

the single ignimbrite cooling unit E (average thickness, 28 m; volume, ca. 30 km₃) forms the uppermost member of the Miocene Upper Mogán Formation on Gran Canaria. It is strongly chemically zoned from basal, first-erupted comendite (peralkaline rhyolite) to late-erupted trachyte, and, apart from an upper trachytic zone, it is densely welded. E was emplaced onto a surface inclined ca. 2–5° from the source caldera. Detailed mapping of key sections, up to 300 m long, exposed in barranco walls, ca. 10 km from the caldera margin, reveals structures that are interpreted to have been produced by rheomorphic deformation of the ignimbrite along shear zones. The shear zones formed within the lower-viscosity comenditic tuff. Extensional structures include mega-boudinage and decapitated sequences and compression resulted in sequence repitition by overthrusting. Mechanisms traditionally thought to be important during rheomorphic deformation of welded tuffs (compaction, lateral creep, folding, vertical density-driven diapirism) cannot account for these features, which reflect lateral (post-compactional) rheomorphic movement locally in excess of 800 m. We suggest the following sequence of events: emplacement of the several flow units; compaction, with little lateral movement; rheomorphic deformation. During and after compaction, layers of secondary porosity developed within the comenditic tuff, possibly where upward escape of gas was prevented by overlying, relatively impermeable layers of densely compacted ignimbrite. These structurally weak layers of high porosity subsequently acted as shear zones.  相似文献   

Long-term prediction of intermediate depth earthquakes in the southern Aegean region based on a time-predictable model   总被引：1，自引：0，他引：1  

B. C. Papazachos 《Natural Hazards》1993,7(3):211-218

Repeat times of strong intermediate depth (60 km h 180 km) earthquakes have been determined by the use of instrumental and historical data for six seismogenic sources in the Benioff zone of the southern Aegean area. For four of these sources, at least two interevent times (three mainshocks) are available for each source. By using the repeat times for these four sources, the following relation has been determined: logT _t = 0.20M _min + 0.19M _p +a, whereT _t is the repeat time (in years),M _min the surface wave magnitude of the smallest earthquake considered,M _p the magnitude of the preceding mainshock and a parameter which varies from source to source. A multilinear correlation coefficient equal to 0.91 was determined for this relation, which indicates that the time predictable model holds to a satisfactory degree for the strong mainshocks of intermediate focal depth in the southern Aegean.By assuming that the ratioT/T _t, whereT is the observed andT _t the calculated repeat time, follows a lognormal distribution, the conditional probabilities for the occurrence of strong (M _s 6.5) and very strong (M _s 7.5) earthquakes during the period 1991–2001 in these four seismogenic sources have been calculated. These probabilities are very high (P > 0.9) for the strong and high (P > 0.5) for the very strong intermediate depth earthquakes which occur in the three sources of the shallower (h < 100 km) part of the Benioff zone where coupling occurs between the front parts of the Mediterranean lithosphere (downgoing) and the Aegean lithosphere.  相似文献   

Sulfide oxidation—an environmental problem within colliery spoil dumps     

H. Wiggering 《Environmental Geology》1993,22(2):99-105

Because of the high degree of automation in the coal mining industry in the Ruhr area, Germany, about 1 metric ton of crushed rock/colliery spoil is brought to the surface for every metric ton of coal. Most of the colliery spoil disposed of must be dumped. These colliery spoil dumps are anthropogenic geological sediment bodies, which have a characteristic facies resulting from geological, technical, and economical factors connected with the formation of the dumps. The relation between the facies of the dumps and these factors, for example, is examplified with the pyrite content within the colliery spoil. Pyrite content within the dumps is dependent both on the conditions during sedimentation and (early) diagenesis and the techniques used for mining and processing. Thus, this geologic-technical facies of the dumps controls the weathering processes on and in dumps. These humaninduced processes are mainly responsible for the environmental impact on soil and groundwater. Oxidation of pyrite as well as alteration of pyrite under anoxic conditions yields dissolution of carbonates, accompanied by gypsum formation, by acid attack and strong acidification takes place.  相似文献   

北京云蒙山地区花岗岩穹隆及伸展构造的探讨   总被引：9，自引：0，他引：9  

张建新  曾令森 《地质论评》1997,43(3):232-240

北京云蒙山花岗岩为一中生代侵入的花岗岩穹隆,花岗岩穹隆的叶理普遍发育,叶理轨迹基本平行于穹隆的外部边界,并显示出从核部到边部逐渐增强,东南侧明显强于西北侧的特点。变形构造研究显示,花岗岩穹隆的边部及围岩中普遍存在不同层次及不同运动方向的伸展构造。东南侧以具河防口－水峪伸展型韧性剪切带为特征,剪切运动标志显示为从ＮＷ－ＳＥ的正剪切运动,有限应变分析估算其剪切位移量在１０ｋｍ以上,剪切带上部被河防口正  相似文献   

A Step Towards Evaluation of the Seismic Response Reduction Factor in Multistorey Reinforced Concrete Frames   总被引：1，自引：0，他引：1  

Barakat  Samar a.  Husein Malkawi  Abdallah I.  Al-Shatnawi  Anis S. 《Natural Hazards》1997,16(1):65-80

A seismic nonlinear time-history analysis was made for four-, six-, and eight-storey reinforced concrete buildings. These buildings were made as three-dimensional space frame structures with shear walls in both orthogonal directions. They have five bays with 4.8 m spacing each in the horizontal direction, and three bays with 4.2 m spacing each in the transversal direction. The frames were designed according to the Jordanian Seismic Code of practice for Seismic Zones 4, 3, 2, and 1 as proposed for Jordan by several authors. Time-history analysis was made using the El Centro (N-S) earthquake record of May 1940 as an actual earthquake excitation. The response reduction factor (R) that primarily consists of two factors that are the ductility reduction (Rµ) and the overstrength (), is obtained. It has been seen that the seismic zoning has a slight effect on the ductility reduction factor for different buildings, since it ranges from Zone 4 to Zone 1 as 2.37 to 2.52, 1.72 to 1.78, and 1.14 to 1.18 for four-, six-, and eight-storey buildings, respectively. Moreover, it is observed that, for different buildings and different seismic zones, the ductility reduction factor (Rµ) is slightly different from the system ductility factor (µ) especially for higher values of µ (i.e., Rµ µ). The response reduction factor, called overstrength (), was evaluated. The overstrength factor was found to vary with seismic zones (Z) , number of stories, and design gravity loads. However, the dependency on seismic zones was the strongest. The average overstrength of these buildings in Zones 4 and 1 was 2.61 and 6.94, respectively. The overstrength increased as the number of storeys decreased: overstrength of a four-storey building was higher than an eight-storey building by 36% in Zone 4, and 39% in Zone 1. Furthermore, buildings of the three heights had an average overstrength 165.9% higher in Zone 1 than in Zone 4. These observations have a significant implications for the seismic design codes which currently do not take into account the variation of the response reduction factor, R (i.e., ductility reduction factor times overstrength).  相似文献