Assessing the population size of the European storm petrel (Hydrobates pelagicus) using spatial autocorrelation between counts from segments of criss-cross ship transects     

van der Meer  Jaap; Leopold  Mardik F. 《ICES Journal of Marine Science》1995,52(5):809-818

  相似文献   

Influence of large-diameter pipe pile driving on surrounding marine soils and adjacent submarine pipelines     

Jinzhong Dou  Zhong-Jie Zhang 《Marine Georesources & Geotechnology》2021,39(1):15-33

Abstract

With the large-scale development and utilization of ocean resources and space, it is inevitable to encounter existing submarine facilities in pile driving areas, which necessitates a safety assessment. In this article, by referring to a wharf renovation project as a reference, the surrounding soil response and buried pipe deformation during pile driving in a near-shore submarine environment are investigated by three-dimensional (3D) numerical models that consider the pore water effect. Numerical studies are carried out in two different series: one is a case of a single pile focusing on the effect of the minimum plane distance of the pile–pipe, and the other is a case of double piles focusing on the effect of the pile spacing.  相似文献   

Investigation of the hydrate reservoir production under different depressurization modes     

Zhizeng Xia  Xuewu Wang  Xiaohua Zhang 《Marine Georesources & Geotechnology》2020,38(8):1002-1012

Abstract

Large reserves of natural gas hydrates exist, and the depressurization method has the greatest potential for gas hydrate reservoir recovery. Currently, the most commonly adopted depressurization simulation method is a constant bottom-hole pressure production scheme. This study proposes a new depressurization mode with decreasing bottom-hole pressure. The production characteristic was numerically investigated using this method. The results show the following: (1) As the depressurization exponent (n) decreases, the development effect improves, and production indexes including cumulative gas production/dissociation and gas-water ratio increase. However, the reservoir energy consumption is higher and the hydrate reformation is more severe. (2) Compared to the proposed depressurization mode, the hydrate production index of the constant bottom-hole pressure production (n?=?0) is better. However, the hydrate reservoir energy consumption is higher and the hydrate reformation is more severe using constant bottom-hole pressure production. (3) To achieve a balance between production and reservoir energy consumption during depressurization production, the bottom-hole pressure should be controlled by selecting a suitable depressurization exponent between n_min and n_max, which can be determined through numerical simulations.  相似文献   

Experimental Study on Friction Coefficient Between Concrete and the Top Surface of Rubble Mound Foundation     

李炎保  蒋学炼  郭鸿仪 《中国海洋工程》2005,19(2):287-298

Experimental studies on the friction coefficient between concrete and the top surface of a rubble mound foundation in China are reviewed. Through comparison of different test results, the development of this research is comprehensively analyzed. An experiment is carried out in the condition similar to prototype. The process curve of friction coefficient with the test block sliding is analyzed and a standard for determination of the friction coetfficient is defined. The variation features of the friction coefficient are analyzed on the basis of the present experimental results and other studies in China. It is shown that the friction coettfficient between concrete and the top surface of a rubble mound foundation decreases with the increase of the foundation pressure, and the friction coettqcient for a very fine leveling bed is smaller than that for a fine leveling bed.  相似文献   

A higher-order σ-coordinate non-hydrostatic model for nonlinear surface waves     

Chih-Chieh Young  Jan-Tai Kuo 《Ocean Engineering》2007,34(10):1357-1370

A higher-order non-hydrostatic model in a σ-coordinate system is developed. The model uses an implicit finite difference scheme on a staggered grid to simultaneously solve the unsteady Navier-Stokes equations (NSE) with the free-surface boundary conditions. An integral method is applied to resolve the top-layer non-hydrostatic pressure, allowing for accurately resolving free-surface wave propagation. In contrast to the previous work, a higher-order spatial discretization is utilized to approximate the large horizontal pressure gradient due to steep surface waves or rapidly varying topographies. An efficient direct solver is developed to solve the resulting block hepta-diagonal matrix system. Accuracy of the new model is validated by linear and nonlinear standing waves and progressive waves. The model is then used to examine freak (extreme) waves. Features of downshifting focusing location and wave asymmetry characteristics are predicted on the temporal and spatial domains of a freak wave.  相似文献   

Instrumentation and Numerical Analysis of Cylindrical Diaphragm Wall Movement During Deep Excavation at Coastal Area     

Dong Soo Kim  Byoung Chul Lee 《Marine Georesources & Geotechnology》2005,23(1):117-136

The lateral deflection of a cylindrical diaphragm wall and the associated ground movement induced by deep excavation are analyzed by performing site instrumentations and numerical analyses in the coastal area of Korea. Wall lateral deflection, rebar stress, and pore water pressure were measured and analyzed in eight directions. Variations of soil properties with the decrease of confining pressure are compared by performing various in situ tests before ad after excavation. To calculate the wall lateral deflection accurately, the effects of small strain nonlinearity, confining pressure, and the hysteresis loading/unloading loop developed during excavation are considered in the proposed numerical analysis. By comparing numerical results with measured ones, the importances of considering small strain nonlinearity and confining pressure reduction in the nonlinear (FEM) are emphasized. Also, the effects of wall stiffness on the performance of cylindrical diaphragm walls are studied for future similar excavation in the coastal area.  相似文献   

高精度CTD剖面仪研制过程中的专用设备   总被引：1，自引：1，他引：1  

王欣 《海洋技术学报》2001,20(1):140-142

本文介绍了“油水分离压力罐”的主要理论依据及该设备采用的特殊的机械结构，实践证明，利用该设备实现了在实验室条件下，模拟深海重力场检测CTD剖面仪中的某些关键传感器的目的。  相似文献   

旧路改建高速公路中地基强夯效应测试与工艺参数分析   总被引：2，自引：1，他引：1  

吕国仁  崔新壮 《岩土力学》2008,29(9):2542-2546

旧路改建高速公路遇到的最主要的问题是地基的不均匀沉降。数值分析表明,对新的天然地基进行处理是解决这一问题的关键。强夯是加固地基的一种有效措施,为了对强夯工艺参数进行优化研究,对夯锤冲击地面过程中产生的动孔隙水压力、动土应力以及夯后超静孔隙水压力的消散过程进行了跟踪测试与分析。结果表明,对以风化料为主的地基,最大夯击数不宜超过4击,而且铺底夯完成2d后就可进行满夯。  相似文献   

智能全站仪在大型压力容器焊接变形监测中的应用     

CHEN Ji-hua  JIANG Yan-yun  HUANG Jian-hua  CHU-hu 《测绘学院学报》2008,(3)

在大型压力容器的部件焊接过程中,由于预热、焊接等工艺流程会导致各部件产生变形,从而引起部件之间的位置关系产生变化。为保证压力容器成品满足设计要求,必须在制造过程中实施变形监测,依据变形数据适当调整焊接工艺流程,控制变形量。提出采用智能全站仪配以自动变形监测软件对大型压力容器焊接变形进行实时监测,并应用于生产实践中,监测结果表明该方法自动化程度高、实时性好,能同时给出位置和姿态变形数据。  相似文献   

岩石圈深部温压条件下萜烷演化的实验研究     

王传远  杜建国  段毅  周晓成  陈志 《矿物岩石》2008,28(2):76-80

在密闭体系中700℃、压力高达3 GPa条件下进行褐煤加水的模拟实验,分析实验产物中的萜烷的变化规律,进而对高压高温下有机质演化进行研究.实验结果表明,相同压力条件下,温度升高有利于有机质的成熟演化;压力增加会抑制或延迟油气的生成和有机质成熟;五环三萜烷ββ生物构型转化为αβ地质构型所需能量比烯烃双键加氢饱和更高.高温超高压条件下,研究样品中C24四环萜烷存在4种同分异构体,含量由高到低依次包括10β(H)-降A-羽扇烷、10p(H)-降A-奥利烷、C24-17,21-断藿烷和10β(H)-降A-乌散烷.高碳数烷烃在地幔高压力条件下仍可以存在,这为认识超压盆地的油气资源与深层油气成藏及保存提供了新的思路.  相似文献