纳米氧化物颗粒对水基钻井液润滑性能影响的试验研究          下载免费PDF全文

陈朝然  刘宝昌  刘时琦 《探矿工程》2016,43(3):27-32

通过在水基钻井液中添加纳米氧化物颗粒,来改善其润滑性能。选用了Al2O3、TiO2及SiO2三种纳米氧化物颗粒作为钻井液改性添加剂,利用极压润滑仪及销盘摩擦磨损实验仪研究了添加不同种类和浓度纳米颗粒氧化物对水基钻井液的润滑性能及减摩效果的影响。结果表明,所添加的3种球形纳米颗粒均有润滑减阻减摩的效果,其中SiO2颗粒的钻井液的润滑性能、滤失性能以及减摩效果都是最好的。当纳米SiO2颗粒加量为0.4%时,滤失量最小,润滑系数降低率达到15.6%,摩擦系数降低率为32.0%,磨痕轨迹平滑,减摩效果最为明显。当纳米颗粒浓度超过0.5%时,减摩效果降低,磨盘脱层磨损明显。  相似文献   

新疆春风油田石炭系火山岩岩性特征及测井识别方法          下载免费PDF全文

黄习习  金强  明玉坤  王伟  程付启 《沉积与特提斯地质》2016,36(4):37-43

不同岩性的火山岩其储集性能差异甚远,准确识别火山岩岩性对于火山岩储层的研究具有重要意义。研究区春风油田石炭系储层以火山岩为主,过渡类型较多,岩性较为复杂。利用岩心观察、薄片鉴定、地化分析等方法确定研究区发育火山熔岩类和火山碎屑岩类两类火山岩,其中,火山熔岩包括玄武岩、安山玄武岩、玄武安山岩以及安山岩,火山碎屑岩有凝灰岩和火山角砾岩等。通过识别出的岩性标定测井,分析每种岩性的测井响应特征,利用交会图法和星形图法,建立了不同岩性的识别标准。  相似文献   

Underwater Navigation Based on Real-Time Simultaneous Sound Speed Profile Correction   总被引：1，自引：0，他引：1  

Kai Zhang  Yong Li  Jianhu Zhao  Chris Rizos 《Marine Geodesy》2016,39(1):98-111

Precise sound speed profile (SSP) information is critical when using sonar for underwater terrain navigation. Nevertheless, acquiring SSP information in real-time is difficult, especially in underwater navigation environment. To account for this problem, this paper presents an underwater navigation method that applies real-time SSP correction to the terrain measurements. The method uses a probe to measure the surface sound speed simultaneously. Meanwhile, redundancy of topographic measurement data is exploited to derive the equivalent SSP information. The acquired equivalent SSP is updated continuously with particle filter algorithm. The terrain measurements can be corrected in real-time with the equivalent SSP to improve the performance of underwater terrain navigation. By removing the impact of inaccurate SSP from the terrain measurements, the proposed method can achieve precise and robust underwater navigation result without using an underway-profiling instrument. Simulated results confirm the good performance of the proposed method.  相似文献   

基于18S和ITS-5.8S rDNA基因序列的白色霞水母(Cyanea nozakii)的分子鉴定与检测     

李玉龙  董婧  王彬  孙明  王爱勇  王文波 《海洋与湖沼》2016,47(1):158-165

采用通用引物PCR扩增法,测定了辽东湾海域的白色霞水母(Cyanea nozakii)螅状体、碟状体及水母体的18S以及ITS-5.8S r DNA序列,同时利用Gene Bank数据库中已有同源序列对其进行序列分析及系统分析。结果显示,白色霞水母3个个体的18S和ITS-5.8S r DNA序列完全一致。白色霞水母样品的ITS-5.8S r DNA序列与Gen Bank中未知真核生物的序列高度相似(≥99%),推测该物种可能是早期发育阶段(卵、浮浪幼虫或碟状体)的白色霞水母样品。霞水母属不同种间18S r DNA序列经比对后同源序列长度为1709bp,多态位点数33个;比对后ITS1同源序列长度为368bp,其中变异位点203个,简约信息位点数178个,单变异位点21个。基于18S r DNA基因序列的霞水母属种内和种间平均遗传距离分别为0、0.008,而基于ITS1序列的霞水母属种内和种间平均遗传距离分别为0.019、0.284。基于ITS1的种间遗传距离是种内遗传距离的15倍,适合于进行物种鉴定。NJ系统树的结果也表明同种的不同个体各自聚枝,其聚类结果大致与形态分类吻合。研究表明,ITS基因片段在霞水母不同种间变异较大,更适于大型水母种类鉴定、检测及属内种间水平的系统进化研究。  相似文献   

基于五种油源的中重度风化溢油的常规鉴定指标的应用效果评估     

贺世杰  王传远  李延太  于洪军  韩彬 《海洋学报(英文版)》2016,35(4):1-8

本文利用采集于我国三大油田的五种原油样品开展了长达210天的溢油风化模拟实验,并依据相对偏差和重复性限数学分析法,进行溢油风化过程分析和诊断比值应用效果评估。研究结果表明:经过210天的风化,溢油鉴定诊断比值发生明显改变;其中来源于萜烷、甾烷和多环芳烃的诊断比值变化率要远低于正构烷烃,可用于中长期风化溢油鉴定。此外,研究发现,在这些有效诊断比值中有4个变化率较小,相对偏差低于5%,保持了较好的稳定性,更适合于重度风化溢油鉴定。  相似文献   

海洋二号微波散射计极地海冰识别算法研究     

邹巨洪  曾韬  郭茂华  崔松雪 《海洋学报(英文版)》2016,35(9):74-79

An Antarctic sea ice identification algorithm on the HY-2A scatterometer(HSCAT) employs backscattering coefficient(σ0) and active polarization ratio(APR) for a preliminary sea ice identification.Then standard deviation(STD) filtering and space filtering are carried out.Finally,it is used to identify sea ice.A process uses a σ0,STD threshold and an APR as sea ice indicators.The sea ice identification results are verified using the sea ice distribution data of the ASMR2 released by the National Snow and Ice Data Center as a reference.The results show very good consistence of sea ice development trends,seasonal changes,area distribution,and sea ice edge distribution of the sea ice identification results obtained by this algorithm relative to the ASMR2 sea ice results.The accuracy of a sea ice coverage is 90.8% versus the ASMR2 sea ice results.This indicates that this algorithm is reliable.  相似文献   

海洋生态重要性区域的内涵与识别方法研究——以黄河口为例   总被引：3，自引：0，他引：3  

SHEN Zhiliang  YAO Yun  WU Yulin 《海洋学报(英文版)》2016,35(10):20-27

海洋生态环境目前正在承受来自人类活动和气候变化的巨大压力;急需必要的管理工具或决策支持系统来应对这些压力所带来的生态环境问题。对海洋生境的分类识别是开展生物多样性保护的基础和前提;海洋生态重要区识别作为一种客观、科学和灵活的生境分类评估和选划方法;已被科学界和管理者广泛接受和认可。本文首先介绍了海洋生态重要区的概念内涵以及识别方法的研究进展;给出了海洋生态重要区的定义;之后以黄河口为例;初步建立了针对该区域的生态重要区识别标准和评价方法;对黄河口及邻近海区进行了生态重要性等级划分。本文是对生态重要区识别方法在我国近海的首次应用尝试;研究结果可为我国基于生态系统的海洋管理提供科学方法和工具;也可为其他区域的研究提供借鉴。  相似文献   

Effects of Mudstone Particle Content on Shear Strength of a Crushed Sandstone–Mudstone Particle Mixture     

Jun-Jie Wang  Zhen-Feng Qiu  Wen-Jie Deng  Hui-Ping Zhang 《Marine Georesources & Geotechnology》2016,34(4):395-402

The present study focuses on the shear strength, deformation, and particle crushing of sand which is mixed by crushed sandstone and mudstone particles. Two triaxial tests—one for unsaturated specimens and the other for saturated specimens—were performed, along with sieve analysis tests. Results obtained from the triaxial tests indicate that, with the increment of the mudstone particle content by weight, the angle of internal friction decreases, the cohesion increases and then decreases, and both the initial angle of shearing resistance at the atmospheric pressure and decremental angle increase and then decrease. Compared to the unsaturated specimens, the deviator stress or normalized deviator stress of the saturated specimens at the same axial stress may decrease due to the wetting action. Thus, the shear strength of the tested materials may be reduced by the wetting action. Results of sieve analysis tests indicate that the mixing of some mudstone particles into the sandstone particle mixture may reduce the amount of particle crushing, but the wetting action may increase the amount. The amount of the crushed particle may arrive at a minimum of 40% of mudstone particle content by weight.  相似文献   

典型矿区尾矿库特征污染物识别研究          下载免费PDF全文

任鸿飞  杨家林  马彤真 《探矿工程》2018,45(10):115-118

通过对典型尾矿库土壤样品分析,利用重金属超标率、植物体BCF、污染因子的权重值筛选等通进行典型污染物识别,为开展尾矿库污染治理工作提供依据。  相似文献   

郑州市地面沉降监测基岩标施工技术   总被引：3，自引：2，他引：1       下载免费PDF全文

王刚  李莹  黄烜  于丽 《探矿工程》2018,45(4):82-86

根据区域地质条件,郑州市地面沉降监测网基岩标建标场地选择在淮河西路与西三环交叉口东南600 m的河南省地质环境监测院内,建标深度为732 m。地质鉴别孔孔深780 m,孔径108 mm,全孔取心钻进,施工的重点是保证岩心采取率,采用泥浆护壁回转钻进,根据钻进层位的岩性不同配置不同特性的泥浆;基岩标标孔孔深780 m,孔径311 mm,施工的控制目标是孔身质量和垂直度。采用三牙轮钻头宝塔式钻具组合不取心钻进施工工艺。取得了较好的施工质量,创造了良好的效益。  相似文献