日本囊对虾(Marsupenaeus japonicus)秋繁仔虾形态表型与抗流性能间的相关性   总被引：1，自引：1，他引：0  

王志铮  朱海军  任夙艺  斯烈钢  祝本强 《海洋与湖沼》2016,47(2):360-368

于水温(18.0±1.0)°C、盐度20、pH 8.1±0.2条件下,以水流为胁迫因子(时长1min),以日本囊对虾秋繁同生群仔虾[总长(7.643±0.639)mm]为实验对象,以溢水口(实验初始时刻仔虾放置处)为起点,按等距离间距法将自制的水流测定装置(总长1m)依次划分为A(0—25cm)、B(25—50cm)、C(50—75cm)、D(75—100cm)和E(100cm)等五个区段,在确认实验终了时刻分布于A区段内仔虾数量占实验仔虾总数5%的水流速度为0.823cm/s后,以此为实验流速,借助显微扫描像素测量技术和多元分析方法定量研究了A、B、C、D、E实验群体(依次为实验终止时刻分布于A、B、C、D、E区段内的仔虾)个体间形态比例性状间的差异。结果表明:(1)在所涉15项形态测量指标中,各实验群体间均无显著差异(P0.05)的形态性状共计8项,依次为X_4(眼径)、X_5(头胸甲长)、X_6(头胸甲高)、X_7(第一腹节长)、X_8(第二腹节长)、X_9(第三腹节长)、X_~(10)(第四腹节长)和X_14(腹节高);(2)在所涉17项形态比例指标中,实验群体间均无显著差异(P0.05)的形态比例性状共计7项,依次为C_2(额剑长/总长)、C_9(第五腹节长/总长)、C_(10)(尾节长/总长)、C_(11)(尾扇长/总长)、C_(15)(头胸甲高/头胸甲长)、C_(16)(腹节高/第一腹节长)和C_(17)(尾节高/尾节长);(3)经主成分分析,提取到的5个特征值均大于1的主成分,累计贡献率达80.795%,其中第1主成分39.561%,其载荷绝对值大于0.5的主要影响变量占形态比例性状总数的47.059%;(4)将A实验群体定义为水流胁迫处理选留群,B、C、D、E实验群体统归为水流胁迫处理淘汰群。采用逐步判别法,以判别贡献率较大的C_1(第一触角柄长/总长)、C3(眼径/总长)、C7(第三腹节长/总长)、C13(额剑长/头胸甲长)为自变量,所建的Fisher分类函数方程组可较清晰地区分淘汰群和选留群个体,其中选留群的判别准确率P_1、P_2分别为98%和84.85%,淘汰群的判别准确率P_1、P_2分别为82.25%和97.63%,两者综合判别准确率为90.12%。综上可知,借助形态表型分型可实现日本囊对虾仔虾不同抗流性能群体间的筛选。  相似文献   

Community‐Derived Standards for LA‐ICP‐MS U‐(Th‐)Pb Geochronology – Uncertainty Propagation,Age Interpretation and Data Reporting          下载免费PDF全文

Matthew S. A. Horstwood  George Gehrels  Simon E. Jackson  Noah M. McLean  Chad Paton  Norman J. Pearson  Keith Sircombe  Paul Sylvester  Pieter Vermeesch  James F. Bowring  Daniel J. Condon  Blair Schoene 《Geostandards and Geoanalytical Research》2016,40(3):311-332

The LA‐ICP‐MS U‐(Th‐)Pb geochronology international community has defined new standards for the determination of U‐(Th‐)Pb ages. A new workflow defines the appropriate propagation of uncertainties for these data, identifying random and systematic components. Only data with uncertainties relating to random error should be used in weighted mean calculations of population ages; uncertainty components for systematic errors are propagated after this stage, preventing their erroneous reduction. Following this improved uncertainty propagation protocol, data can be compared at different uncertainty levels to better resolve age differences. New reference values for commonly used zircon, monazite and titanite reference materials are defined (based on ID‐TIMS) after removing corrections for common lead and the effects of excess ²³⁰Th. These values more accurately reflect the material sampled during the determination of calibration factors by LA‐ICP‐MS analysis. Recommendations are made to graphically represent data only with uncertainty ellipses at 2s and to submit or cite validation data with sample data when submitting data for publication. New data‐reporting standards are defined to help improve the peer‐review process. With these improvements, LA‐ICP‐MS U‐(Th‐)Pb data can be considered more robust, accurate, better documented and quantified, directly contributing to their improved scientific interpretation.  相似文献   

Uncertainty analysis of space–time prisms based on the moment-design method     

Yee Leung  Zi Zhao  Jiang-Hong Ma 《International journal of geographical information science》2016,30(7):1336-1358

Space–time prism (STP) is an important concept for the modeling of object movements in space and time. An STP can be conceptualized as the result of the potential path of a moving object revolving around in the three-dimensional space. Though the concept has found applications in time geography, research on the analysis and propagation of uncertainty in STPs, particularly under high degree of nonlinearity, is scanty. Based on the efficiency and effectiveness of the moment-design (M-D) method, this paper proposes an approach to deal with nonlinear error propagation problems in the potential path areas (PPAs) of STPs and their intersections. Propagation of errors to the PPA and its boundary, and to the intersection of two PPAs is investigated. Performance of the proposed method is evaluated via a series of experimental studies. In comparison with the Monte Carlo method and the implicit function method, simulation results show the advantages of the M-D method in the analysis of error propagation in STPs.  相似文献   

New tectonic map of Northern-Central-Eastern Asia:Position and evolution of Mesozoic sedimentary basins     

《世界地质(英文版)》2016,(4):261-276

The beginning of the XXI century was marked a new rising of the international tectonic cartography as a result of analysis and synthesis of a huge volume of geological information obtained for the territory of Asia especially during the last 30 years. The previous tectonic maps for Asia were created in the 1960 s--1970 s of the last century. Since that time,the national geological surveys have compiled tectonic maps exclusively in the limits of their own state boundaries. The international cooperation of five countries since 2002( Russia,China,Mongolia,Kazakhstan and Republic of Korea) gave a unique possibility to join the data into a united cartographic form as Atlas of Geological Maps( since 2002-Atlas of Geological Maps of Central Asia and since 2007-Atlas of Geological Maps of Northern-Central-Eastern Asia). Both atlases include four maps: geological,tectonic,metallogenic,and energy resources. Tectonic Map of Northern-Central-Eastern Asia and Adjacent Areas at scale 1 ∶ 2 500 000 was the key map for further compilation of the metallogenic and energy resources( coal,oil and gas) maps. By this reason,special attention was given to showing the structure and composition of the Mesozoic sedimentary basins in Northern-Central- Eastern Asia as the most perspective structures for oil-and-gas and coal prospect.  相似文献   

孟加拉湾若开海域晚新生代构造变形及其对油气的控制作用     

唐鹏程  邵大力  王海强  王红平  孙辉  张勇刚  马宏霞  丁梁波 《海相油气地质》2016,(1):52-60

利用钻井、二维和三维地震资料,剖析了孟加拉湾若开海域晚新生代的构造变形特征,探讨了构造变形对油气的控制作用。区域深度地质剖面揭示,研究区南部仅发育底部滑脱层(深度10 km),而北部则发育底部滑脱层(深度12 km)和中部滑脱层(深度4 km);受滑脱层的控制,研究区南部仅发育一套构造层,而北部则发育变形不协调的上、下两套构造层;南部背斜的南北向延伸距离、波长及背斜间隔距离均明显大于北部。通过北部局部构造精细解析表明,研究区北部变形相对较复杂,上构造层主要发育近南北向的背斜和次级张扭性右旋走滑断层,二者形成时间分别为晚第四纪和晚第四纪末。若开海域晚新生代的构造变形对圈闭形成、油气运聚和保存条件具有重要的控制作用。指出研究区南部平缓褶皱带构造—岩性复合圈闭具备形成大油气田的条件,是下一步油气勘探的重要目标。  相似文献   

Seismic vulnerability assessment for Montreal     

Keyan Yu  Philippe Rosset 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2016,10(2):164-178

In Canada, Montreal is the second city with the highest seismic risk. This is due to its relatively high seismic hazard, old infrastructures and high population density. The region is characterised by moderate seismic activity with no recent record of a major earthquake. The lack of historical strong ground motion records for the region contributes to large uncertainties in the estimation of hazards. Among the sources of uncertainty, the attenuation function is the main contributor and its effect on estimates of risks is investigated. Epistemic uncertainty was considered by obtaining damage estimates for three attenuation functions that were developed for Eastern North America. The results indicate that loss estimates are highly sensitive to the choice of the attenuation function and suggest that epistemic uncertainty should be considered both for the definition of the hazard function and in loss estimation methodologies. Seismic loss estimates are performed for a 2% in 50 years seismic threat, which corresponds to the design level earthquake in the national building code of Canada, using HAZUS-MH4 for the Montreal region over 522 census tracts. The study estimated that for the average scenario roughly 5% of the building stock would be damaged with direct economic losses evaluated at 1.4 billion dollars for such a scenario. The maximum number of casualties would result in approximately 500 people being injured or dead at a calculated time of occurrence of 2?pm.  相似文献   

Petrochemistry of Granitoids Along the Loei Fold Belt,Northeastern Thailand     

《Resource Geology》2018,68(4):395-424

Petrochemical characteristics of Permo‐Triassic granitoids from five regions (i) Mung Loei, (ii) Phu Thap Fah – Phu Thep, (iii) Phetchabun, (iv) Nakon Sawan – Lobburi, and (v) Rayong – Chantaburi along the Loei Fold Belt (LFB), northeastern Thailand were studied. The LFB is a north–south trending 800 km fold belt that hosts several gold and base‐metal deposits. The granitoids consist of monzogranite, granodiorite, monzodiorite, tonalite, quartz‐syenite, and quartz‐rich granitoids. These are composed of quartz, plagioclase, and K‐feldspar with mafic minerals such as hornblende and biotite. Accessory minerals, such as titanite, zircon, magnetite, ilmenite, apatite, garnet, rutile, and allanite are also present. Magnetic susceptibilities in the SI unit of granitoids vary from 6.5 × 10⁻³ to 15.2 × 10⁻³ in Muang Loei, from 0.1 × 10⁻³ to 29.4 × 10⁻³ in Phu Thap Fah – Phu Thep, from 2.7 × 10⁻³ to 34.6 × 10⁻³ in Petchabun, from 2.4 × 10⁻³ to 14.1 × 10⁻³ in Nakon Sawan – Lobburi, and from 0.03 × 10⁻³ to 2.8 × 10⁻³ in Rayong – Chantaburi. Concentration of major elements suggests that these intermediate to felsic plutonic rocks have calc‐alkaline affinities. Concentration of REE of the granitoids normalized to chondrite displays moderately elevated light REE (LREE) and relatively flat heavy (HREE) patterns, with distinct depletion of Eu. Rb versus Y/Nb and Nb/Y tectonic discrimination diagrams illustrate that the granitoids from Muang Loei, Phu Thap Fah – Phu Thep, Phetchabun, Nakon Sawan – Lobburi, and Rayong – Chantaburi formed in continental volcanic‐arc setting. New age data from radiometric K‐Ar dating on K‐feldspar from granodiorite in Loei and Nakhon Sawan areas yielded 171 ± 3 and 221 ± 5 Ma, respectively. K‐Ar dating on hornblende separated from diorite in Lobburi yielded 219 ± 8 Ma. These ages suggest that magmatism of Muang Loei occurred in the Middle Jurassic, and Nakon Sawan – Lobburi occurred in Late Triassic. Both Nb versus Y and Rb versus (Y + Nb) diagrams and age data indicate that Nakon Sawan – Lobburi granitoids intruded in Late Triassic at Nong Bua, Nakon Sawan province and Khao Wong Phra Jun, Lobburi province in volcanic arc setting. Muang Loei granitoids at the Loei province formed later in Middle Jurassic also in volcanic arc setting. The negative δ³⁴S_CDT values of ore minerals from the skarn deposit suggest that the I‐type magma has been influenced by light biogenic sulfur from local country rocks. The Au‐Cu‐Fe‐Sb deposits correlate with the magnetite‐series granitoids in Phetchabun, Nakon Sawan – Lobburi and Rayong – Chantaburi areas. Metallogeny of the Au and Cu‐Au skarn deposits and the epithermal Au deposit is related to adakitic rocks of magnetite‐series granitoids from Phetchabun and Nakon Sawan areas. All mineralizations along the LFB are generated in the volcanic arc related to the subduction of Paleo‐Tethys. The total Al (^TAl) content of biotite of granitoids increases in the following order: granitoids associated with Fe and Au deposit < with Cu deposit < barren granitoids. X_Mg of biotite in granitoids in Muang Loei indicates the crystallization of biotite in magnetite‐series granitoids under high oxygen fugacity conditions. On the other hand, low X_Mg (<0.4) of biotite in magnetite‐series granitoids in Phu Thap Fah – Phu Thep and Rayong – Chantaburi indicates a reduced environment and low oxygen fugacity, associated with Au skarn deposit (Phu Thap Fah) and Sb‐Au deposit (Bo Thong), respectively. The magnetite‐series granitoids at Phu Thap Fah having low magnetic susceptibilities and low X_Mg of biotite were formed by reduction of initially oxidizing magnetite‐series granitic magma by interaction with reducing sedimentary country rocks as suggested by negative δ³⁴S_CDT values.  相似文献   

余姚—丽水断裂带嵊州地区燕山期主要构造特征     

褚平利  陈荣  曾剑威  廖圣兵  杨祝良 《中国地质调查》2018,5(5):49-57

余姚—丽水断裂带是浙东南地区活动时间长、延伸远、发育比较宽的一条NE—NNE展布的断裂构造带,在浙江嵊州地区上火山岩系磨石山群和下火山岩系永康群中构造形迹表现十分明显。余姚—丽水断裂带由一系列NE—NNE向控制区内白垩纪盆地形成与发展的正断层,以及NE—NNE走向、自北西向南东逆冲的叠瓦状断层和轴迹呈NE—NNE向的褶皱组成。通过对其构造活动特征及控制新老地层的时序关系研究,结合区域构造活动规律和时空演化关系等综合分析认为: 正断层形成时间较早,控制白垩纪盆地的形成和发展,与早白垩世岩石圈伸展减薄形成的拉张作用密切相关; 叠瓦状逆冲断层及斜歪褶皱、紧闭同斜褶皱等褶、断构造组合形成于晚白垩世之后,其动力学机制可能与古太平洋构造域向太平洋构造域的转换效应有关。研究成果为深入探讨浙东地区燕山期构造演化提供了新的素材和资料。  相似文献   

青藏高原云团东传过程及其中中尺度对流系统的统计特征     

王婧羽  王晓芳  汪小康  崔春光 《大气科学》2019,43(5):1019-1040

利用逐小时风云卫星TBB资料、逐小时中国自动站与CMORPH降水产品融合数据以及国家级地面观测站24小时累积降水量,统计分析2010～2016年夏季,伴随下游地区（104°E以东）降水的青藏高原云团东传过程以及东传过程中镶嵌于云团中的中尺度对流系统（Mesoscale Convective System,简称MCS）特征。结果表明,共出现120次伴随下游降水的高原云团东传过程,6月出现最频繁,但持续时间较长的过程多出现在7月。云团向东传播的主要三条路径是平直东传、沿长江折向东传和复合东传。其中路径二——沿长江折向东传中的过程是高影响过程,因为过程次数较多（46次）,过程平均持续时间较长（62小时）,在下游地区引发的降水日数和暴雨日数最多。属于东传过程的MCS在7月形成最多,集中分布在青藏高原东坡、云贵高原东部、长江沿岸及其以南地区。高原MCS影响长江中下游地区降水主要是通过向东传播的形式实现,因为即使生命史更长的中α尺度对流系统（Meso-α Convective System,简称MαCS）也鲜少直接移动至110°E以东地区。不同区域的中α尺度持续性拉长形对流系统（Permanent Elongated Convective System,简称PECS）的日变化特征显示,东传过程MCS更容易在夜间从高原东坡向东传播至下游地区。在三条路径中,路径二中的东传过程MCS数量最多、在下游地区发展最旺盛并与降水日数和覆盖范围存在更好的对应关系。  相似文献   

2016年1月低温事件的季节内振荡特征   总被引：1，自引：0，他引：1  

江雨霏  姚素香  王咏青  张秀年 《气象科学》2019,39(1):42-49

利用NECP/DOE逐日再分析资料,分析了2016年1月发生在我国南方的持续低温事件。结果表明,此次过程存在明显的季节内振荡特征,其中准双周振荡为气温变化的主要模态。此次低温事件之所以达到寒潮级别,是由于天气尺度变化与10~20 d气温准双周振荡处于相同的降温变化过程中。准双周尺度的冷中心与天气尺度冷中心均从中高纬度向低纬地区传播,并在我国南方汇合,从而引起持续性的低温。通过诊断温度局地变化方程发现,此次天气过程中,温度平流项和绝热变化项是近地层局地温度降低的主要原因。天气尺度气温变化与10~20 d低频振荡对持续降温都有较大贡献,天气尺度降温略大于低频降温。  相似文献