Investigation of hydraulic fracturing operation and fracture propagation simulation in reservoir rock     

Siavash Ashoori  Mohammad Abdideh  Milad Yahagh 《Geomechanics and Geoengineering》2015,10(3):203-211

For many decades most oil wells in Iran have produced using their natural flow potential and haven’t needed to be fractured. As time goes by, the reservoir pressure depletes and the need for hydraulic fracturing as a stimulation practice arises. Nonetheless there is no record of successful hydraulic fracturing in Iran.

The Bangestan reservoir with a suitable amount of oil in place and good rock reservoirs, has been selected for the present research work. In this work, the in situ stress profile was calculated by using the available petrophysical data. This is achieved by using poroelastic theory for the stresses, and the Mohr–Coulomb criterion to predict failure. The model leads to easily computed expressions for calculating the pressure required to maintain hydraulic fracturing. Then the appropriate depth for treatment was determined. The results indicate that Ilam and Sarvak formations could be good candidates for hydraulic fracturing. Then, for two layers, a hydraulic fracture was designed and the production was predicted and the Net Present Value (NPV) resulting from the fracture of both layers was investigated.  相似文献   

利用GOCE模拟观测反演重力场的Torus法   总被引：1，自引：1，他引：0  

刘焕玲  汉江  徐新禹  朱广彬 《测绘学报》2015,44(9):965-972

在介绍Torus方法反演地球重力场模型的基本原理和方法的基础上,基于圆环面上均匀分布的卫星引力梯度模拟观测值解算了200阶次的地球重力场模型,在无误差情况下,Torus方法解算模型的阶误差RMS小于10-16,验证了该方法的严密性。利用61dGOCE卫星轨道上无误差的模拟引力梯度观测值解算了200阶次的地球重力场模型,分析了格网化误差、极空白对解算精度的影响,迭代3次后,在不考虑低次系数情况下,模型的大地水准面阶误差和累积误差均较小,最大值仅为0.022mm和0.099mm。在沿轨卫星引力梯度模拟数据中加入5mE/Hz1/2的白噪声,基于Torus方法和空域最小二乘法解算了200阶次的地球重力场模型,Torus方法的精度略低于空域最小二乘法的精度,在不考虑低次项的情况下,两种方法解算模型的大地水准面阶误差最大值分别为1.58cm和1.45cm,累积误差最大值分别为6.37cm和5.55cm。但由于采用了二维快速傅里叶技术和块对角最小二乘法,极大地提高了计算效率。本文数值结果说明Torus方法是一种独立有效的方法,可用于GOCE任务海量卫星引力梯度观测值反演重力场的快速解算。  相似文献   

利用球体剖分瓦块构建真三维数字地球平台     

王金鑫  郑亚圣  李耀辉  禄丰年  刘俊楠 《测绘学报》2015,44(6):694-701

全球离散网格是面向空间大数据的模型框架,常用于构建数字地球平台。基于球体的剖分瓦块不仅可以构建真三维的数字地球模型,而且可以实现天地一体化的空间数据集成、融合、表达和应用。本文详细论述了球体大圆弧QTM八叉树网格的剖分原理、网格几何特征分析和编解码方法等理论体系,并利用剖分瓦块实现了球体的任意分割以及地下、地表和空中实体的可视化建模。研究表明,球体QTM网格具有剖分规则简单、体系规整、几何特征明晰,适用性强等特点,尤其是可以推广到椭球。因而,该方案可用于天地一体化的空间数据的组织、管理与应用。  相似文献   

基于弹性力学思想的河流等高线冲突自动处理方法     

刘芳  王光霞  侯璇  贾奋励 《测绘工程》2015,(12):57-61

文中分析河流等高线冲突的自动处理方法,按照地图综合原理,提出基于弹性力学思想的河流、等高线冲突自动检测和纠正算法。该算法实现河流等高线的冲突探测,并对目标进行受力分析,运用平面杆件弹性体的受力变形模型,得到目标的位移量。该方法在纠正冲突的同时保证目标空间关系的正确,实验证明算法具有较高效率。  相似文献   

物方多视影像密集匹配方法     

齐润冰  宋伟东 《测绘科学》2015,(10):98-101

针对多视影像由于遮挡导致的匹配不确定性问题,该文提出一种特征点和物方地面元相结合的多视影像密集匹配方法。该方法利用规则格网划分的空间平面作为基础,通过特征点匹配获取同名像点和高程赋值的格网平面,为后续匹配提供初始的DSM。在此基础上,利用铅垂线轨迹法对平面上规则分布的平面元进行匹配,加密特征点匹配结果。通过对某区域UCX影像的匹配实验表明,该文提出的算法能高效、准确地得到匹配结果,特别对较大影像计算快速,适用于实时处理。  相似文献   

地籍空间对象拓扑关系一致性研究     

胡克新  张求喜  岳淑英 《测绘与空间地理信息》2015,(9):115-118

空间数据库是通过建立并执行空间完整性约束来维护目标及其间关系的精确性、正确性、有效性。空间完整性约束包括对几何结构冲突、属性冲突及空间关系冲突约束,其中,空间关系冲突是指目标间的拓扑、方向及度量关系应符合空间完整性约束。在地籍数据库中,空间对象拓扑关系约束是为防止任意对象及其目标间的拓扑关系冲突,避免造成数据库对实体及其之间关系的表达错误,导致自身几何结构和对象间拓扑关系错误等,从而破坏了空间数据库的完整性。  相似文献   

TanDEM-X双站SAR干涉测量及研究进展     

孙亚飞  江利明  柳林  孙永玲  汪汉胜 《国土资源遥感》2015,(1)

较全面、系统地介绍了Tan DEM-X/Terra SAR-X双站SAR科学计划,重点涉及其科学目标、Tan DEM-X卫星参数、轨道结构以及干涉数据获取模式等相关内容,并讨论了双站SAR成像、极化In SAR和数字波束成形等干涉测量新技术及其研究进展。这些双站SAR新技术的实现将大大地推动SAR干涉测量在全球地形测绘、冰川学、海洋学及地质学等领域中的应用。  相似文献   

Geochemical constraints on the contribution of Louisville seamount materials to magmagenesis in the Lau back-arc basin,SW Pacific     

Zheng-Gang Li  Yan-Hui Dong  Ji-Qiang Liu  Ling Chen 《International Geology Review》2015,57(5-8):978-997

Seamounts are an integral part of element recycling in global subduction zones. The published trace element and Pb-Sr-Nd isotope data for basaltic lavas from three key segments (Central Lau Spreading Ridge (CLSR), Eastern Lau Spreading Ridge (ELSR), and Valu Fa Ridge (VFR)) of the Lau back-arc basin were compiled to evaluate the contribution of Louisville seamount materials to their magma genesis. Two geochemical transitions, separating three provinces with distinct geochemical characteristics independent of ridge segmentation, were identified based on abrupt geochemical shifts. The origin of the geochemical transitions was determined to be the result of drastic compositional changes of subduction components added into the mantle source, rather than the transition from Indian to Pacific mid-ocean ridge basalt (MORB) mantle, or due to variable mantle fertilities. The most likely explanation for the drastic shifts in subduction input is the superimposition of Louisville materials on ‘normal’ subduction components consisting predominantly of aqueous fluids liberated from the down-going altered oceanic crust and minor pelagic sediment melts. Quantitative estimation reveals that Louisville materials contributed 0–74% and 21–83% of the Th budget, respectively, to CLSR and VFR lavas, but had no definite contribution to the lavas from the ELSR, which lies farthest away from the subducted Louisville seamount chain (LSC). The spatial association of the subducted LSC with the Louisville-affected segments suggests that the Louisville signature is regionally but not locally available in the Tonga subduction zone. Besides, the preferential melting of subducted old Cretaceous LSC crust instead of the old normal Pacific oceanic crust at similar depths implies that elevated temperature across the subduction interface or seamount erosion and rupture were required to trigger melting. A wider implication of this study, thus, is that seamount subduction may promote efficiency of element recycling in subduction zones.  相似文献   

基于DEM-CFD耦合的气吸式排种器仿真研究     

张凯  洪杨  徐祝欣 《南京气象学院学报》2020,12(6):767-772

为提高大白菜等小粒径精密播种机的机械化水平,设计了一种小粒径气吸式排种器.首先利用JPS-12排种器性能检测试验台对排种器进行测试,得到不同参数组合下的性能指标与最优参数组合.然后使用计算流体力学方法（CFD）,借助FLUENT软件分析了吸种器内部流场的分布,得到了吸种器内部压力分布云图和吸种孔截面云图.最后基于离散元法（DEM）建立大白菜种子颗粒模型,对排种器仿真模型进行简化和网格划分,完成了小粒径气吸式排种器DEM-CFD耦合仿真实验.对比台架与仿真试验结果,得出如下的结论：当排种盘转速为20 r/min,真空度为2.2 kPa时,排种性能最佳.  相似文献   

俄远东、中国东北的构造特点及岩石圈深部的不均一性     

赵春荆  何国琦  段瑞焱 《国土资源》1995,(4)

俄罗斯远东和中国东北前新生代可划分为８个大地构造单元。区域地质、深部地质、地球物理及新构造研究表明，地壳和地幔深部的不均一性反映了该区主要构造单元的深部构成和大地动力学等方面的特点。地热和地磁资料表明，远东地区软流层顶部具有起伏形态的特点，最大深度２００～２５０ｋｍ，浅部仅１００～１４０ｋｍ，松辽盆地７５～１００ｋｍ；在中国东北及亚太过渡带上地幔低速层厚度在０～１００ｋｍ之间变化，计算数据表明，本区地壳厚度为３０～４４ｋｍ，变化幅度为１４ｋｍ。  相似文献