Origin and anatomy of two different types of mass–transport complexes: A 3D seismic case study from the northern South China Sea margin     

《Marine and Petroleum Geology》2014

Integration of 2D and 3D seismic data from the Qiongdongnan Basin along the northwestern South China Sea margin has enabled the seismic stratigraphy, seismic geomorphology and emplacement mechanisms of eight separate, previously undocumented, mass–transport complexes (MTCs) to be characterized. These eight MTCs can be grouped into two types:(1) Localized detached MTCs, which are confined to submarine canyons and cover hundreds of km², consist of a few tens of km³ remobilized sediments and show long striations at their base. They resulted from small-scale mass-wasting processes induced by regional tectonic events and gravitational instabilities on canyon margins.(2) Regional attached MTCs, which occur within semi-confined or unconfined settings and are distributed roughly perpendicular to the strike of the regional slope. Attached MTCs occupy hundreds to thousands of km² and are composed of tens to hundreds of km³ of remobilized sediments. They contain headwall escarpments, translated blocks, remnant blocks, pressure ridges, and basal striations and cat-claw grooves. They were created by large-scale mass-wasting processes triggered by high sedimentation rates, slope oversteepening by shelf-edge deltas, and seismicity.Our results show that MTCs may act as both lateral and top seals for underlying hydrocarbon reservoirs and could create MTC-related stratigraphic traps that represent potential drilling targets on continental margins, helping to identify MTC-related hydrocarbon traps.  相似文献   

The evolution of rifting on the volcanic margin of the Pelotas Basin and the contextualization of the Paraná–Etendeka LIP in the separation of Gondwana in the South Atlantic     

《Marine and Petroleum Geology》2014

The Pelotas Basin is the classical example of a volcanic passive margin displaying large wedges of seaward-dipping reflectors (SDR). The SDR fill entirely its rifts throughout the basin, characterizing the abundant syn-rift magmatism (133–113 Ma). The Paraná–Etendeka Large Igneous Province (LIP), adjacent to west, constituted the pre-rift magmatism (134–132 Ma). The interpretation of ultra-deep seismic lines showed a very different geology from the adjacent Santos, Campos and Espírito Santo Basins, which constitute examples of magma-poor passive margins. Besides displaying rifts totally filled by volcanic rocks, diverse continental crustal domains were defined in the Pelotas Basin, such as an outer domain, probably constituted by highly stretched and permeated continental igneous crust, and a highly reflective lower crust probably reflecting underplating.The analysis of rifting in this portion of the South Atlantic is based on seismic interpretation and on the distribution of regional linear magnetic anomalies. The lateral accretion of SDR to the east towards the future site of the breakup and the temporal relationship between their rift and sag geometries allows the reconstitution of the evolution of rifting in the basin. Breakup propagated from south to north in three stages (130–127.5; 127.5–125; 125–113 Ma) physically separated by oceanic fracture zones (FZ). The width of the stretched, thinned and heavily intruded continental crust also showed a three-stage increase in the same direction and at the same FZ. Consequently, the Continental-Oceanic Boundary (COB) shows three marked shifts, from west to east, from south to north, resulting into rift to margin segmentation. Rifting also propagated from west to east, in the direction of the final breakup, in each of the three segments defined. The importance of the Paraná–Etendeka LIP upon the overall history of rupturing and breakup of Western Gondwanaland seems to have been restricted in time and in space only to the Pelotas Basin.  相似文献   

Experimental research on the mechanical properties of methane hydrate-bearing sediments during hydrate dissociation     

《Marine and Petroleum Geology》2014

This paper describes studies of the effect of hydrate dissociation on the safety and stability of methane hydrate-bearing sediments. Methane hydrates within the sediments were dissociating under the conditions of a confining pressure of 0.5 MPa, 1 MPa, 2 MPa and a temperature of −5 °C. After 6 h, 24 h, or 48 h, a series of triaxial compression tests on methane hydrate-bearing sediments were performed. The tests of ice-clay and sediments without hydrate dissociation were performed for comparison. Focusing on the mechanical properties of the sediments, the experimental results indicated that the shear strength of the ice-clay mixtures was lower than that of the methane hydrate-bearing sediments. The strength of the sediments was reduced by hydrate dissociation, and the strength tended to decrease further at the lower confining pressures. The secant modulus E_S of the sediments dropped by 42.6% in the case of the dissociation time of the hydrate of 48 h at the confining pressure of 1 MPa; however, the decline of the initial yield modulus E₀ was only 9.34%. The slower hydrate dissociation rate contributed to reducing the failure strength at a declining pace. Based on the Mohr–Coulomb strength theory, it was concluded that the decrease in strength was mainly affected by the cohesive reduction. Moreover, the mathematical expression of the M–C criterion related to the hydrate dissociation time was proposed. This research could be valuable for the safety and stability of hydrate deposits in a permafrost region.  相似文献   

Wall effect of underwater explosion load based on wave motion theories     

肖巍  姚熊亮  郭君 《中国海洋工程》2014,28(5):587-598

Owing to the existence of the flow field boundary, the shock wave load near the boundary is different from the freefield shock wave load. In the present paper, the hull plate load subjected to underwater shock wave is investigated based onwave motion theories; in addition, the experimental study of the hull plate load is carried out. According to the theoreticalanalysis of the hull plate pressure, we find that the hull plate pressure oscillates repeatedly and decays rapidly with timepassing, the maximum hull plate pressure is 2/（1＋n） times the maximum free field pressure, where n is the ratio ofimpedance, and the impulse is much smaller than the free field impulse. Compared with the experimental study, thetheoretical results agree well with the experimental data.  相似文献   

Design of a hydraulic power take-off system for the wave energy device with an inverse pendulum   总被引：1，自引：0，他引：1  

张大海  李伟  赵海涛  鲍经纬  林勇刚 《中国海洋工程》2014,28(2):283-292

This paper describes a dual-stroke acting hydraulic power take-off （PTO） system employed in the wave energy converter （WEC） with an inverse pendulum. The hydraulic PTO converts slow irregular reciprocating wave motions to relatively smooth, fast rotation of an electrical generator. The design of the hydraulic PTO system and its control are critical to maximize the generated power. A time domain simulation study and the laboratory experiment of the full-scale beach test are presented. The results of the simulation and laboratory experiments including their comparison at full-scale are also presented, which have validated the rationality of the design and the reliability of some key components of the prototype of the WEC with an inverse pendulum with the dual-stroke acting hydraulic PTO system.  相似文献   

Wave characteristics at the south part of the radial sand ridges of the Southern Yellow Sea     

杨斌  冯卫兵  张俞 《中国海洋工程》2014,28(3):317-330

  相似文献   

The role of the capture fisheries and aquaculture sectors in the Korean national economy: An input–output analysis     

《Marine Policy》2014

The aquaculture industry can meet food security needs and reduce the pressure on marine resources. The expansion of aquaculture allows the fisheries industry to restructure from hunting to farming, and thus drives the need for an analysis of the economic impacts of aquaculture industry in consideration of the interdependence between capture fisheries and aquaculture industry. This study attempts to analyze the economic impacts of two fishery sectors using input–output (I–O) analysis, with specific application to Korea. To this end, this study applies the I–O models to the Korean I–O tables generated by the Bank of Korea, paying particular attention to the two fishery sectors in Korea, considering them as exogenous, and then determining their impacts. Specifically, the production-inducing effects, employment-inducing effects, supply shortage effects, sectoral price effects, forward linkage effects, and backward linkage effects of the two fishery sectors are presented over the period 1995–2010. For example, the production-inducing effect of a KRW 1.0 change in fisheries investment is larger in the petroleum and chemical sectors than in other sectors. Moreover, the aquaculture sector has larger employment-inducing effects than the capture fisheries. Finally, the potential uses of the results of this analysis are presented from the perspective of policy instruments, and policy implications are discussed.  相似文献   

Nonlinear optimization method of ship floating condition calculation in wave based on vector     

丁宁  余建星 《中国海洋工程》2014,28(4):471-478

Ship floating condition in regular waves is calculated. New equations controlling any ship＇s floating condition are proposed by use of the vector operation. This form is a nonlinear optimization problem which can be solved using the penalty function method with constant coefficients. And the solving process is accelerated by dichotomy. During the solving process, the ship＇s displacement and buoyant centre have been calculated by the integration of the ship surface according to the waterline. The ship surface is described using an accumulative chord length theory in order to determine the displacement, the buoyancy center and the waterline. The draught forming the waterline at each station can be found out by calculating the intersection of the ship surface and the wave surface. The results of an example indicate that this method is exact and efficient. It can calculate the ship floating condition in regular waves as well as simplify the calculation and improve the computational efficiency and the precision of results.  相似文献   

基于LAGFD-WAM海浪数值模式的海南万宁近海波浪能资源评估     

李泽文  周强  杨永增 《海洋预报》2014,31(5)

利用1991—2010年的NCEP再分析风场驱动LAGFD-WAM海浪数值模式,通过数值后报方法,对海南万宁近海海域近20年的波浪场进行了逐时数值模拟,数值模拟结果和实测结果对比的一致性良好。在数值后报数据的基础上计算了万宁近海波浪能流密度和能流密度变异系数,并对其年内变化特点、区域分布特征和稳定性进行了分析。万宁近海年均波浪能流密度3—10 k W/m,属于波浪能资源可利用区和较丰富区。年内各月月均能流密度差别较大,12月波浪能资源最好,5月波浪能资源最差。秋季(9—11月)和冬季(12—2月)月均波浪能流密度分别为5—24 k W/m和6—29 k W/m,春季(3—5月)和夏季(6—8月)分别为3—7 k W/m和1—6 k W/m。地形对波浪能量的辐聚作用明显,受岬角、岛屿、海底陡坡等因素影响,大洲岛、白鞍岛周边、大花角附近及白鞍岛以北部分近岸区域形成波浪能富集区。除9月外,年内其他时段能流密度变异系数都在2.8以下,9月能流密度变异系数在3.0—5.9之间。  相似文献   

基于PIV技术不同形式防波堤周围涡旋场特性研究(英文)     

郄禄文  夏乾  张翔  蒋学炼 《海洋通报(英文版)》2014,(2)

深水防波堤周围流场存在复杂的紊动变化,防波堤较容易发生失效破坏。本文利用PIV技术,基于模型实验,对规则波作用下防波堤周围的速度流场及其涡流特性进行了实验研究,获得了规则波流场的瞬时速度分布。通过对不同型式防波堤在不同的水力条件下的波浪流场实验数据的分析,定量地研究了防波堤堤身水域的涡旋流场的水力特性。  相似文献