基于北斗的自动气象站报文传输方案设计     

王明辉  雷卫延  黄海王莹  黄飞龙 《气象科技》2019,47(6):900-904

针对北斗卫星下行通信受4G和WIFI信号带内干扰导致传输成功率低的情况,设计了基于增加传输次数来降低误码率的自动气象站报文北斗传输方案。首次提出并建成用于传输自动气象站报文的双北斗指挥机用户群,根据北斗用户机的传输能力设计专用的气象报文编码格式,利用冗余频度开展报文重发,实现单个时次报文的4次重复接收,稳定地保证了较高的传输成功率。方案同时实现了观测报文1min内到达预报员桌面,在稳定性和时效性上均取得了突破。  相似文献   

2016—2017年贵州大雾时空分布及气象要素演变分析     

胡跃文  秦杰  苏静文  牛迪宇  吉廷艳 《气象》2019,45(5):659-666

利用2016—2017年自动站逐小时观测资料,统计分析了贵州大雾天气的时空分布特征;同时,结合天气图资料分析筛选了锋面大雾个例31 d和辐射大雾个例17 d,对比分析大雾生消过程中风、温、湿等气象要素演变特点。结果表明：(1)贵州大雾在秋末到初春较为频发;一天中夜间02—09时是大雾频发时段,07时达到峰值。(2)贵州自西向东有4个多雾区,分别为西南部区域、中部区域、东部边缘区域和北部局部区域。(3)锋面大雾主要出现在贵州中西部,范围最广时可达20个县站左右,持续时长可达10~13 h,单站可持续60 h以上。辐射大雾以贵州中东部地区出现较多,范围最广时可接近40个县站,远比锋面大雾范围广,持续时间相对较短。(4)大雾期间,10 min平均风速为0~3 m?s-1,相对湿度为97%~100%,温度露点差为0~0.5℃;辐射大雾初期或形成前气温呈下降状态,消散期升温较明显,地气温差呈现由负到正或由低到高的变化趋势,反映出近地层大气由较为稳定的逆温环境向不稳定环境变化的过程;锋面大雾初期的降温和后期的升温现象并不突出,地气温差也没有特定的变化规律,仅有部分个例与锋面大雾情况一致。  相似文献   

Appropriate Spatial Sampling of Rainfall or Flow Simulation/Echantillonnage Spatial de la Pluie Approprié pour la Simulation D'écoulements     

《水文科学杂志》2013,58(2)

Abstract

The objective of this study is to find the appropriate number and location of raingauges for a river basin for flow simulation by using statistical analyses and hydrological modelling. First, a statistical method is used to identify the appropriate number of raingauges. Herein the effect of the number of raingauges on the cross-correlation coefficient between areally averaged rainfall and discharge is investigated. Second, a lumped HBV model is used to investigate the effect of the number of raingauges on hydrological modelling performance. The Qingjiang River basin with 26 raingauges in China is used for a case study. The results show that both cross-correlation coefficient and modelling performance increase hyperbolically, and level off after five raingauges (therefore identified to be the appropriate number of rain-gauges) for this basin. The geographical locations of raingauges which give the best and worst hydrological modelling performance are identified, which shows that there is a strong dependence on the local geographical and climatic patterns.  相似文献   

Explicit integration of bounding surface model for the analysis of earthquake soil liquefaction     

Konstantinos I. Andrianopoulos  Achilleas G. Papadimitriou  George D. Bouckovalas 《国际地质力学数值与分析法杂志》2010,34(15):1586-1614

This paper presents a new plasticity model developed for the simulation of monotonic and cyclic loading of non‐cohesive soils and its implementation to the commercial finite‐difference code FLAC, using its User‐Defined‐Model (UDM) capability. The new model incorporates the framework of Critical State Soil Mechanics, while it relies upon bounding surface plasticity with a vanished elastic region to simulate the non‐linear soil response. Stress integration of constitutive relations is performed using a recently proposed explicit scheme with automatic error control and substepping, which so far has been employed in the literature only for constitutive models aiming at monotonic loading. The overall accuracy of this scheme is evaluated at element level by simulating cyclic loading along complex stress paths and by using iso‐error maps for paths involving change of the Lode angle. The performance of the new constitutive model and its stress integration scheme in complex boundary value problems involving earthquake‐induced liquefaction is evaluated, in terms of accuracy and computational cost, via a number of parametric analyses inspired by the successful simulation of the VELACS centrifuge Model Test No. 2 studying the lateral spreading response of a liquefied sand layer. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

An empirical approach to estimating population parameters from censored fracture-length distributions   总被引：1，自引：0，他引：1  

Pascal de Caprariis 《Mathematical Geology》1988,20(7):803-814

Most fracture data sets are length-censored because of incomplete exposure at the surface, so estimating values of parameters of the sampled populations is difficult. Unless the form of the distribution function of the population is known, or one which is analytically tractable is assumed, length-censoring presents formidable problems in determining population parameters. Tests conducted on experimental fracture patterns developed in clay samples subjected to simple shear loading are the basis of a distribution-free way to estimate population parameters. Comparison of random samples of censored and uncensored fracture lengths shows that a useful, homogeneous data set consists of those cracks which lie entirely within the sampling area (two-ended cracks). The properties of this data set can be used to estimate the mean and variance of uncensored data. Estimates of the maximum fracture length of uncensored data, using the variance and maximum length of these two-ended cracks, show good agreement with measured values. Knowledge of the mean, variance, and maximum value of fracture-length populations are of interest in engineering and hydraulic studies, as well as in remote sensing studies of the Earth and other planets. Application of these results to data on rock masses are subject to the caveat that different crack-growth mechanisms in clay and rock may affect the accuracy of the calculations.  相似文献   

Toward an improved global network for determination of tropospheric ozone climatology and trends     

Ronald G. Prinn 《Journal of Atmospheric Chemistry》1988,6(3):281-298

An examination of typical tropospheric ozone variability on daily, monthly, annual and interannual timescales and instrumental precision indicates that the current ozonesonde network is insufficient to detect a trend in tropospheric ozone of 1% per year at the 2 level even at stations with records a decade in length. From a trend prediction analysis we conclude that in order to detect a 1% per year trend in a decade or less it will be necessary to decrease the time between observations from its present value of 3–7 days to 1 day or less. The spatial distribution of the current ozonesonde stations is also inadequate for determining the global climatology of ozone. We present a quantitative theory taking into account photochemistry, surface deposition, and wind climatology to define the effectively sampled region for an observing station which, used in conjunction with the instrumental precision and the above prediction analysis, forms the basis for defining a suitable global network for determining regional and global ozone climatology and trends. At least a doubling of the present number of stations is necessary, and the oceans, most of Asia, Africa, and South America are areas where more stations are most needed. Differential absorption lidar ozone instruments have the potential for far more frequent measurements of ozone vertical profiles and hence potentially more accurate climatology and trend determinations than feasible with ozonesondes but may produce a (fair weather) biased data set above the cloud base. A strategy for cloudy regions in which either each station utilizes both lidars and sondes or each station is in fact a doublet comprised of a near-sea-level lidar and a proximal-mountain-top lidar could serve to minimize this bias.  相似文献   

位场DFT算法研究   总被引：5，自引：0，他引：5       下载免费PDF全文

柴玉璞 《地球物理学报》1988,31(2):211-224

本文推广了经典的抽样定理,并据此导出了函数有限离散傅里叶变换误差方程（简称DFT误差方程,下同）。该方程把有限离散傅里叶变换中固有的离散效应和有限效应表示为确切的数学形式。离散效应被表示为一个含整参变量（参变量取0,1,…,N-1）的复无穷级数;有限效应被表示为一个含整参变量（参变量取0,1,…,N-1）的复无穷级数的DFT。 基于DFT误差方程和位函数特点,作者提出了两种位场数值傅里叶变换新算法--移样法和等效源续尾叠样法。移样法可近百倍地提高位场数值傅里叶反变换的精度,等效源续尾叠样法可数十倍地提高正变换精度。两种算法都不需要增加资料长度和取样密度,因而基本不需要增加计算机时间和内存。文中给出了算例。  相似文献   

皖江中东部雾的客观预报自动化业务系统     

周述学  叶金印 《气象》1994,20(11):37-39

介绍了一种雾的客观预报方法，并研制了一个与ＳＴＹＳ接口的雾的客观预报自动化业务系统，对雾有一定的预报能力。  相似文献   

地形图等高线成组综合的试验   总被引：15，自引：0，他引：15  

费立凡 《武汉大学学报(信息科学版)》1993,(Z1)

本文在讨论制图自动综合一般问题的基础上,着重分析了两种等高线自动综合的技术路线存在的优缺点。笔者提出,采用模拟人类专家智能的方法,从二维的等高线输入数据出发,提取地貌结构信息,从而对等高线进行成组的综合,直接形成经综合的二维等高线输出数据,有可能获得较为简捷,效果良好的综合结果。在对这条技术路线进行实验的过程中所涉及的人工智能问题,主要包括:对无序数字化等高线数据的整理、等高线上重要特征点的识别、正负向地貌特征的确定、谷地点的选出、谷底线的自动跟踪、谷地重要性的计算、谷间距的自动量算、对称谷地的寻找、综合后图形的生成等。  相似文献   

Equipment and procedure improvements for a lightweight,inexpensive, percussion core sampling system     

Mel A. Reasoner 《Journal of Paleolimnology》1993,8(3):273-281

This paper describes improvements for an inexpensive, lightweight percussion core sampling system and presents examples of recovered core. The system has proven most effective in remote settings where the weight of a coring system may be a constraint. Cores of up to 5.5 m in length have been recovered and the system has functioned successfully in water depths to 200 m. The system weighs approximately 25 kg and costs less than $450.00 (US).The percussion corer is designed for operation from a stable ice-pack surface. The core barrel assembly is lowered through the water column and driven into sediment with a weighted driver. A secondary line is used to raise and drop the driver. The driver is guided to the core barrel assembly by the main line. Cores are retrieved by a simple pulley system anchored to the ice pack.  相似文献