Designing geotechnical structures with a proper stability criterion as a safety factor     

《Computers and Geotechnics》2016

  相似文献   

Stability analysis of tunnels driven in jointed rocks by means of a homogenized limit analysis approach     

Samir Maghous  José E. B. Winiawer  Vanessa F. Pasa Dutra 《国际地质力学数值与分析法杂志》2014,38(18):2009-2032

Conceived as a potential alternative to the classical design methods employed for analyzing the stability of underground structures driven in jointed rocks, the homogenization approach stems from the heuristic idea that, from a macroscopic point of view, a rock mass cut by a network of joints may be perceived as a homogenized continuum. The strength properties of the latter can be theoretically obtained from the failure conditions of its individual constituents: rock matrix and joint interfaces. At the material level, the limit analysis reasoning is used in the context of homogenization to formulate the homogenized strength criterion of a jointed rock mass in the particular situation of a single set of parallel joints. As it could be expected, the obtained closed‐form expressions show the strength anisotropy induced by joint preferential orientation. The support functions (π functions) associated with the homogenized strength criterion are also determined in both plane strain and three‐dimensional cases. This criterion is then applied to the investigation of stability analysis of a tunnel excavated in a jointed rock mass. Upper bounds estimated of the stability factor are derived from the implementation of the kinematic approach directly on the homogenized underground structure. Finally, the approach is applied to analyze and discuss the collapse of the Pinheiros subway station (São Paulo, Brazil). Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Three‐dimensional shakedown solutions for anisotropic cohesive‐frictional materials under moving surface loads     

Juan Wang  Hai‐Sui Yu 《国际地质力学数值与分析法杂志》2014,38(4):331-348

Previous work on three‐dimensional shakedown analysis of cohesive‐frictional materials under moving surface loads has been entirely for isotropic materials. As a result, the effects of anisotropy, both elastic and plastic, of soil and pavement materials are ignored. This paper will, for the first time, develop three‐dimensional shakedown solutions to allow for the variation of elastic and plastic material properties with direction. Melan's lower‐bound shakedown theorem is used to derive shakedown solutions. In particular, a generalised, anisotropic Mohr–Coulomb yield criterion and cross‐anisotropic elastic stress fields are utilised to develop anisotropic shakedown solutions. It is found that shakedown solutions for anisotropic materials are dominated by Young's modulus ratio for the cases of subsurface failure and by shear modulus ratio for the cases of surface failure. Plastic anisotropy is mainly controlled by material cohesion ratio, the rise of which increases the shakedown limit until a maximum value is reached. The anisotropic shakedown limit varies with frictional coefficient, and the peak value may not occur for the case of normal loading only. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Cracking risk of partially saturated porous media—Part I: Microporoelasticity model     

Bernhard Pichler  Luc Dormieux 《国际地质力学数值与分析法杂志》2010,34(2):135-157

Drying of deformable porous media results in their shrinkage, and it may cause cracking provided that shrinkage deformations are hindered by kinematic constraints. This is the motivation to develop a thermodynamics‐based microporoelasticity model for the assessment of cracking risk in partially saturated porous geomaterials. The study refers to 3D representative volume elements of porous media, including a two‐scale double‐porosity material with a pore network comprising (at the mesoscale) 3D mesocracks in the form of oblate spheroids, and (at the microscale) spherical micropores of different sizes. Surface tensions prevailing in all interfaces between solid, liquid, and gaseous matters are taken into account. To establish a thermodynamics‐based crack propagation criterion for a two‐scale double‐porosity material, the potential energy of the solid is derived, accounting—in particular—for mesocrack geometry changes (main original contribution) and for effective micropore pressures, which depend (due to surface tensions) on the pore radius. Differentiating the potential energy with respect to crack density parameter yields the thermodynamical driving force for crack propagation, which is shown to be governed by an effective macrostrain. It is found that drying‐related stresses in partially saturated mesocracks reduce the cracking risk. The drying‐related effective underpressures in spherical micropores, in turn, result in a tensile eigenstress of the matrix in which the mesocracks are embedded. This way, micropores increase the mesocracking risk. Model application to the assessment of cracking risk during drying of argillite is the topic of the companion paper (Part II). Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

基于ArcGIS平台与质检软件的地理国情普查快速质量控制方法     

宋旭东 《测绘与空间地理信息》2016,(4):91-94

"信息化质检平台IGCES"及"地理国情普查成果质检软件"是某省地理国情普查采用的主要人机交互质量控制软件。该类软件使用复杂,某些检查项耗时长,难以满足快速化质检的要求,本文结合地理国情普查具体实施要求,提出"人工详查、基于ArcGIS 10.1平台与质检软件概查"的快速质检方法,为国家战略规划制定、空间规划管理、区域政策制定、灾害预警、科学研究等领域的地理国情监测提供有力的数据保障。  相似文献   

利用Abel-Poisson径向基函数模型化局部重力场     

马志伟  陆洋  涂弋  朱传东  郗慧 《测绘学报》2016,45(9):1019-1027

多种类型高分辨率重力场数据的不断增加,使得在局部范围内精化重力场模型成为了可能。本文采用Abel-Poisson核将重力场量表示成有限个径向基函数线性求和的形式,对局部区域的多种重力场数据进行联合建模。为了提高运算速度,运用了基于自适应精化格网算法的最小均方根误差准则(RMS)来求解径向基函数平均带宽。以南海核心地区为例,联合两种不同类型、不同分辨率的重力场资料(大地水准面起伏6'×6'、重力异常2'×2'),构建了局部区域高分辨率的重力场模型。所建模型表示的重力场参量达到了2'×2'的分辨率,对原始的重力异常数据(2'×2')拟合的符合程度达到±0.8×10-5m/s2。结果表明,利用径向基函数方法进行局部重力场建模,避免了球谐函数建模收敛慢的问题,有效提高了模型表示重力场的分辨率。  相似文献   

绿色交通目标下集装箱“公转铁”的CO2减排潜力评估     

陶学宗  吴琴  尹传忠 《气候变化研究进展》2019,15(6):660-669

为提高集装箱“公转铁”减排潜力评估结果的准确性,在分析“公转铁”减排原理的基础上,综合考虑空箱调运和重箱运输“门到门”运输链的干线运输、端点装卸、电力设备作业、集卡短驳、公铁中转等排放,引入反映活动类型、设备结构、能源生命周期排放的参数,对作业活动-方式结构-能耗强度-排放因子（ASIF）方法进行改进,建立“公转铁”减排潜力评估框架。以义乌—宁波港域出口集装箱运输为例,通过实地调研和公开文献获取数据,进行实证研究。结果表明,如果忽略必要因素将会导致每TEU运输需求“公转铁”的CO₂减排率被高估0.50~36.73个百分点;最佳“公转铁”情景可减排3.42万t CO₂,相应减排率为13.58%。研究结果可为政府相关部门客观评估“公转铁”的减排潜力、制定有效的“公转铁”政策措施提供理论支持。  相似文献   

Macroscopic criteria for Green type porous materials with spheroidal voids: application to double porous materials          下载免费PDF全文

W. Q. Shen  J.‐F. Shao  D. Kondo 《国际地质力学数值与分析法杂志》2017,41(13):1453-1473

Combined effects of matrix plastic compressibility and void shape are investigated for ductile porous materials. To this end, a spheroidal volume containing a confocal spheroidal (prolate or oblate) void subjected to uniform strain rate boundary conditions has been first studied. A Green type matrix is chosen as a prototype for investigating effects of plastic compressibility. This is carried out by using a kinematics limit analysis theory from which a closed‐form expression of the macroscopic criterion is established for the considered class of materials. These results are then extended to ductile porous materials made up of a green matrix containing randomly oriented spheroidal voids. In the framework of a two‐step homogenization procedure, the obtained results are implemented to describe the macroscopic behavior of double porous materials involving spherical voids at the microscale and randomly oriented and distributed spheroidal voids at the mesoscale. For validation purpose, the new derived criteria are assessed and validated by comparing their predictions to available upper bounds and numerical data from literature. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

新疆乌鲁木齐地区地震水化震例深入剖析     

蔡仲琼 《内陆地震》1989,3(3):230-239

本文在水化前兆清理研究的基础上,采用统一的异常判别方法,应用适合本地区的“异常可靠性评价标准”,对新疆乌鲁木齐地区150km范围内的中强地震和反例事件进行了深入剖析,对水化异常与地震三要素的关系进行了统计分析。研究结果是制定地震水化异常判据和定量化指标的基础。  相似文献   

岩石压剪性断裂特性及Ⅰ—Ⅱ型复合断裂判据     

潘别桐  唐辉明 《地球科学》1988,(4)

本文系统阐述了岩石压剪性断裂的特性,认为金属断裂力学复合断裂判据基本上不适用于压剪状态下的岩石斯裂;在此基础上,提出了新的岩石压剪性断裂判据:2COSθ_0/2(cosθ_0-1)[(1+1/f~2)~(1/2)-1]K_Ⅰ+[(sin θ_0/2-3sin 3θ_0/2)(1+1/f~2)~1/2+4sin θ_0/2]K_Ⅱ=4K_(Ⅰc),推导了起始断裂角ψ_0,说明了实验验证结果,指出了该判据在工程地质领域中的应用途径。  相似文献