日本沼虾黑鳃病几种同工酶的变化与病理分析   总被引：10，自引：0，他引：10  

吴惠仙  薛俊增 《海洋湖沼通报》2002,(1):32-37

酯酶（EST），过氧化物酶（POD），乳酸脱氢酶（LDH）和苹果酸脱氢酶（MDH）同工酶在日本沼虾中存在着组织和器官的特异性，患黑鳃病后酶带发生显著变化。在肌肉、肝脏、心脏和鳃中病虾较健康虾的LDH酶谱分别缺失了2、6、2和1条酶带，同时肝脏中新增了1条酶带；POD酶谱分别缺失了0、7、4和2酶带，肌肉中新增了2条酶带；EST酶谱分别缺失了0、2、3和1条酶带，肌肉、心脏和鳃中分别新增了1、2和2条酶带；MDH酶谱分别缺失了0、2、1和1条酶带，肌肉和脏脏中各新增了1条酶带。  相似文献   

关于修改港工钢筋混凝土规范小偏心受压构件正截面强度计算的建议     

王清湘 《海洋工程》1995,(2)

本文提出在小偏心受压构件正截面强度计算中，取消弯曲抗压强度ｆｃｍ（Ｒｗ），采用轴心抗压强度ｆｃ，这与构件的实际破坏形态相符。对小偏心受压构件正截面强度计算提出了设计建议。特别是对工程上大量应用的矩形截面对称配筋小偏压构件提示了简捷的设计方法，与以往的近似计算方法相比具有物理概念明确，精度高，方法简捷的特点。  相似文献   

常压法合成Methomyl的研究     

钱佐国  孙明昆  杨福顺  孙林枫  周曾昊 《中国海洋大学学报(自然科学版)》1990,(3)

提出一种合成Methomyl的改良法。该方法的特点是反应可在常压下进行。对常压反应的优宜条件作了系统研究,并讨论了反应机理。  相似文献   

辽东湾S2冰侧限剪切强度的试验研究   总被引：3，自引：0，他引：3  

李志军孟广琳  高树刚刘培林 《海洋工程》2002,20(1):20-23

利用试验方法系统地研究了辽东湾S2型海冰侧限剪切强度随剪切应变速率、加载方向、法向应力、温度和冰内孔隙率的变化规律。介绍了S2型海冰各向异性特点及剪切应变速率对剪切破坏方式的效应和韧脆破坏转变的条件。分析了不同加载方向海冰峰值剪切强度的差异 ,获得 - 6 2℃温度下S2冰内摩擦角和内聚力分别为 42°和 70 0kPa。利用统计分析给出峰值剪切强度与冰温和孔隙率的试验关系  相似文献   

Modelling the effect of swimbladder compression on the acoustic backscattering from herring at normal or near-normal dorsal incidences     

Gorska  Natalia; Ona  Egil 《ICES Journal of Marine Science》2003,60(6):1381-1391

  相似文献   

Tectonics of a fast spreading center: A Deep-Tow and sea beam survey on the East Pacific rise at 19°30′ S     

John D. Bicknell  Jean-Christophe Sempere  Ken C. Macdonald  P. J. Fox 《Marine Geophysical Researches》1987,9(1):25-45

Sea Beam and Deep-Tow were used in a tectonic investigation of the fast-spreading (151 mm yr^-1) East Pacific Rise (EPR) at 19°30 S. Detailed surveys were conducted at the EPR axis and at the Brunhes/Matuyama magnetic reversal boundary, while four long traverses (the longest 96 km) surveyed the rise flanks. Faulting accounts for the vast majority of the relief. Both inward and outward facing fault scarps appear in almost equal numbers, and they form the horsts and grabens which compose the abyssal hills. This mechanism for abyssal hill formation differs from that observed at slow and intermediate spreading rates where abyssal hills are formed by back-tilted inward facing normal faults or by volcanic bow-forms. At 19°30 S, systematic back tilting of fault blocks is not observed, and volcanic constructional relief is a short wavelength signal (less than a few hundred meters) superimposed upon the dominant faulted structure (wavelength 2–8 km). Active faulting is confined to within approximately 5–8 km of the rise axis. In terms of frequency, more faulting occurs at fast spreading rates than at slow. The half extension rate due to faulting is 4.1 mm yr^-1 at 19°30 S versus 1.6 mm yr^-1 in the FAMOUS area on the Mid-Atlantic Ridge (MAR). Both spreading and horizontal extension are asymmetric at 19°30 S, and both are greater on the east flank of the rise axis. The fault density observed at 19°30 S is not constant, and zones with very high fault density follow zones with very little faulting. Three mechanisms are proposed which might account for these observations. In the first, faults are buried episodically by massive eruptions which flow more than 5–8 km from the spreading axis, beyond the outer boundary of the active fault zone. This is the least favored mechanism as there is no evidence that lavas which flow that far off axis are sufficiently thick to bury 50–150 m high fault scarps. In the second mechanism, the rate of faulting is reduced during major episodes of volcanism due to changes in the near axis thermal structure associated with swelling of the axial magma chamber. Thus the variation in fault spacing is caused by alternate episodes of faulting and volcanism. In the third mechanism, the rate of faulting may be constant (down to a time scale of decades), but the locus of faulting shifts relative to the axis. A master fault forms near the axis and takes up most of the strain release until the fault or fault set is transported into lithosphere which is sufficiently thick so that the faults become locked. At this point, the locus of faulting shifts to the thinnest, weakest lithosphere near the axis, and the cycle repeats.  相似文献   

BP神经网络在局部似大地水准面精化的应用   总被引：1，自引：0，他引：1  

李爱国  WANG Wei  徐永胜 《全球定位系统》2008,33(3):29-31

针对高程拟合中的模型误差问题,采用BP神经网络方法进行拟合,可以减小模型误差,提高似大地水准面的精化精度。在焦作市局部似大地水准面精化算例中,BP神经网络高程拟合取得了良好的效果。  相似文献   

半参数平差模型估计量的精度评定     

潘雄  刘立龙  陈刚  田玉刚 《测绘工程》2008,17(6):13-15

将半参数估计理论引入测量数据处理理论中,利用Blight和Ott提出的思想,用多项式函数来表示半参数平差模型中的非参数分量,从而得到了半参数平差模型中参数分量和非参数分量的Bayes估计量,通过理论证明,半参数模型参数分量的Bayes估计为通常意义下高斯马尔可夫模型参数估计值与参数期望的加权平均,是一致、渐近无偏和渐近有效估计量,并且其方差小于参数模型中参数估计量的方差。在一定情况下推广了平差理论,具有一定的理论价值。  相似文献   

大区域似大地水准面模型的建立方法研究     

赵建虎  王真祥  王胜平  董江 《武汉大学学报(信息科学版)》2008,33(1):68-71

在充分研究现有几何方法确定局域似大地水准面的基础上,根据独立网内点间高程异常差的不变性和独立网间大地高起算基准面与WGS84椭球面的平行性,提出通过两步处理,获得大区域连续似大地水准面的思想和方法,即首先统一相邻两个独立GPS网大地高起算基准面,然后再利用几何方法确定大区域似大地水准面.该方法在长江口北岸得到了很好的验证,并取得了比较理想的精度.  相似文献   

黑色页岩与土壤重金属污染   总被引：6，自引：1，他引：5  

余昌训  彭渤  唐晓燕  谢淑容  吴甫成  尹春艳  杨广  涂湘林 《矿物岩石地球化学通报》2008,27(2)

本文利用ICP—MS等技术分析了湘中地区黑色页岩及其相应土壤的重金属含量,在对分析结果进行统计分析的基础上,探讨了黑色页岩与土壤重金属污染的关系。研究表明,黑色页岩是富集多种重金属元素的特殊岩石。以黑色页岩岩系为母岩的土壤,不仅明显富集Cu、Cd、Cr、Co、Pb、Zn、Mo、Ni、V、U、Sn、Sb、T1、Th等多种重金属元素,而且受到Mo、Sb、Cd、U、Tl、Cu、V、Sn、Th等重金属的污染,其中以Mo、Cd、Sb、U、Tl等的污染尤为严重。黑色页岩土壤重金属污染在一些地方已产生明显的负面环境效应,值得关注。  相似文献