Relationship between the seismicity and geologic structure of the Blanco Transform Fault Zone     

Robert P. Dziak  Christopher G. Fox  Robert W. Embley 《Marine Geophysical Researches》1991,13(3):203-208

Morphologic studies of an oceanic transform, the Blanco Transform Fault Zone (BTFZ), have shown it to consist of a series of extensional basins that offset the major strike-slip faults. The largest of the extensional basins, the Cascadia Depression, effectively divides the transform into a northwest segment, composed of several relatively short strike-slip faults, and a southeast segment dominated by fewer, longer faults. The regional seismicity distribution (m _b 4.0) and frequency-magnitude relationships (b-values) of the BTFZ show that the largest magnitude events are located on the southeast segment. Furthermore, estimates of the cumulative seismic moment release and seismic moment release rate along the southeast segment are significantly greater than that of the northwest segment. These observations suggest that slip along the southeast segment is accommodated by a greater number of large magnitude earthquakes. Comparison of the seismic moment rate, derived from empirical estimates, with the seismic moment rate determined from plate motion constraints suggests a difference in the seismic coupling strength between the segments. This difference in coupling may partially explain the disparity in earthquake size distribution. However, the results appear to confirm the relation between earthquake size and fault length, observed along continental strike-slip faults, for this oceanic transform.  相似文献   

Relationship between Shot-Induced Noise and Shot Interval in Seismic Refraction Experiments at Sea     

Herber  R.  Weigel  W.  Wong  H. K. 《Marine Geophysical Researches》1997,19(3):257-265

Seismic noise induced by the seismic source during continuous profiling reduces the signal-to-noise ratio and hence the data quality. This noise is largely dependent on the shot interval. In this paper, the noise amplitude of refraction seismic records from a special experiment is analysed as a function of the shot interval. An empirical exponential relationship between mean peak noise amplitude and shot interval is deduced. By increasing the shot interval, the induced noise can be minimized on all successive records. This results in an improvement of the data, predominantly the signal-to-noise ratio. Because the seismic signal and the shot-induced noise have nearly the same spectra, the chance of improving the signal-to-noise ratio by stacking is significantly reduced.  相似文献   

Dereverberation of marine reflection seismic data by a spatial combination of predictive deconvolution and velocity filtering     

C. Samson  G. F. West 《Marine Geophysical Researches》1995,17(1):1-15

Contamination of seismic reflection records at early times by first-order water reverberations can be especially severe during survey operations over hard and flat sea floors on the continental shelf or in lake environments. A new dereverberation scheme based on two classical techniques — predictive deconvolution and velocity filtering — has been developed to address this problem. The techniques are combined spatially to take advantage of their complementary offset- and time-dependent properties. Stage I of the scheme consists of applying predictive deconvolution at short offset. The data are previously conditioned by a normal moveout correction with the water velocity which restores the periodicity of the reverberations in the offset-time plane and enhances the performance of deconvolution. Stage II of the scheme involves velocity filtering in the common-midpoint domain which is particularly effective at long offset where the moveout difference between primary reflections and reverberations is largest. The dereverberation scheme is well suited for the initial processing of large volumes of data due to the general availability of cost-effective deconvolution and velocity filtering algorithms in seismic processing software packages. Practical implementation issues are illustrated by a field example from the GLIMPCE survey in Lake Superior.Lithoprobe Publication No. 475.  相似文献   

Wave reflection from partially perforated-wall caisson breakwater   总被引：2，自引：0，他引：2  

Kyung-Duck Suh  Jae Kil Park  Woo Sun Park   《Ocean Engineering》2006,33(2):264-280

In 1995, Suh and Park developed a numerical model that computes the reflection of regular waves from a fully perforated-wall caisson breakwater. This paper describes how to apply this model to a partially perforated-wall caisson and irregular waves. To examine the performance of the model, existing experimental data are used for regular waves, while a laboratory experiment is conducted in this study for irregular waves. The numerical model based on a linear wave theory tends to over-predict the reflection coefficient of regular waves as the wave nonlinearity increases, but such an over-prediction is not observed in the case of irregular waves. For both regular and irregular waves, the numerical model slightly over- and under-predicts the reflection coefficients at larger and smaller values, respectively, because the model neglects the evanescent waves near the breakwater.  相似文献   

Design of a 3D Chirp Sub-bottom Imaging System     

Jonathan M. Bull  Martin Gutowski  Justin K. Dix  Timothy J. Henstock  Peter Hogarth  Timothy G. Leighton  Paul R. White 《Marine Geophysical Researches》2005,26(2-4):157-169

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.  相似文献   

海洋天然气水合物的地震识别方法研究   总被引：21，自引：2，他引：21  

马在田  耿建华  董良国  宋海斌 《海洋地质与第四纪地质》2002,22(1):1-8

天然气水合物作为21世纪新的自然能源将为人类的生存发展服务。20世纪60年代证实，俄罗斯西伯利亚的麦索亚哈气田为典型的天然气水合物形成的气田，70年代又在海底发现了固体天然气水合物岩样。1971年，RStoll首先将地震剖面中的似海底反向层解释为海洋天然气水合物存在的标志，后来被深海钻探证实，从此地震方法成为大面积研究天然气水合物的重要手段。天然气水合物既是潜在能源，也是影响环境和形成灾害的因素之一，因此，研究天然气水合物是人类在21世纪的重要课题。探讨海洋天然气水合物的地震识别方法，由于这项工作刚刚起步，还没有做出具体的成果，在此只能根据我们仅有的工作和参照国外分开的出版物，以及出国访问得到的有关资料进行分析，提出我们的一些基本设想，与各位专家探讨。  相似文献   

地震作用对琼州海峡海缆路由区海底稳定性影向的分析   总被引：1，自引：0，他引：1  

张效龙  徐家声 《海洋通报》2006,25(4):57-62

以琼州海峡的北海—临高段海缆路由为例,利用计算对比的方法,分析了地震作用下,路由区3m以浅海底土液化或滑移的可能性,评价了路由区海底的稳定性。结果发现,在地震烈度为Ⅶ度的地震作用下,砂性土海底的地震剪应力平均值(0.86kPa,1.72kPa和2.57kPa)小于砂性土的液化剪应力(1.60kPa,3.20kPa和4.81kPa);粘性土海底的地震剪应力平均值(1.25kPa,2.49kPa和3.74kPa)小于粘性土的抗滑剪应力平均值(4.07kPa,4.61kPa和4.49kPa),路由区海底稳定性良好;在地震烈度为Ⅷ度的地震作用下,砂性土海底的地震剪应力平均值(1.73kPa,3.45kPa和5.12kPa)大于砂性土的液化剪应力;粘性土海底的地震剪应力平均值(2.49kPa,4.98kPa和7.47kPa)除表层外,大于粘性土的抗滑剪应力,路由区海底会发生失稳破坏。  相似文献   

Bragg resonant reflection of carrier waves composing wave groups     

Yong-Sik Cho  Jae-Sang Jung   《Ocean Engineering》2006,33(1):82-92

Numerical analyses for the Bragg resonant reflection of carrier waves associated long waves due to sinusoidally varying seabeds are performed by using a set of coupled ordinary differential equations derived from the Boussinesq equations. The Boussinesq equations are firstly approximated with the Fourier decomposition. The coupled governing equations are then derived and used to simulate evolution of both short and long wave components. It is also found that wave groups are generated by two carrier waves with slightly different frequencies. The wave energy of the initial wave components is transferred to other harmonic components during propagation over a long distance. Evolution and reflection of both short and long waves were largely affected by nonlinearity.  相似文献   

Wave Reflection Caused by Wave Overtopping and Sloping Top of Spructure     

LI  Yanbao 《中国海洋工程》2002,16(2):211-218

In this paper, the theoretical analysis and experimental studies are employed to investigate the reflection characteris-tics of partial standing waves caused by wave overtopping and sloping top of structures. Based on the principle of conser-vation of wave energy flux, the third-order Stokes wave theory is used to formulate the reflection coefficient at wave overtopping; the calculation results are regressed into an applied expression. A series of experiments of wave reflection for a vertical-wall structure with chamfered and overhanging upper sections are carried out to investigate the influence of top slope on wave reflection. The regularity of variation of wave reflection in this case is analysed based on the experimental results.  相似文献   

Hilbert Transferin Applied to Separation of Waves     

孙鹤泉  王永学  彭静萍 《中国海洋工程》2002,(2)

The analytical method (AM) for separation of composite waves is presented based on the Hilbert transform. It is ap-plicable to both regular and irregular trains of waves. The wave data series measured with two wave gauges in the experi-ments are separated into two series of incident and reflected waves. Then, the reflection coefficient can be easily ob-tained. The arrival of reflected waves can also be detected for improveraent of the accuracy of the reflection coefficient. The reflection performance of the physical model can be estimated exactly without calculation of wave height and phase difference. Numerical samples developed to test the method are proved to be accurate. Physical experiments are conduct-ed and compared with Goda s method and satisfactory results are obtained.  相似文献