乐清湾的动力沉积过程   总被引：7，自引：0，他引：7  

许卫忆  陈耕心  李伯根 《海洋与湖沼》1992,23(1):20-29

主要采用二维潮波、泥沙输运途径的数值模拟，定量地展示了泥沙在乐清湾内的输运途径和沉降过程。模拟结果表明，乐清湾大致以10m等深线为界，其东部的涨潮流主要来自玉环岛与横趾山之间的深槽；水流在一周日内的轨迹为一宽约1km的狭带；此流态有利于泥沙向南的净输运，从面明利于此海域深水航道的维持。10m等深线以西水流轨迹为一较宽的带状结构，有利于泥沙向西、西北的净输运。华歧潮滩附近水流运动轨迹得于泥沙向北、向西的净输运，从而有利于华歧潮滩的发育。本文还定性讨论了楚门潮滩特征的成因,主要是漩门口堵截前丰富的湾外泥沙以及驻波型潮波与漏斗状地形。  相似文献   

多维联合概率理论对三峡工程设计洪水的计算   总被引：1，自引：0，他引：1  

逯义军  刘德辅  谢波涛  姜云鹏 《中国海洋大学学报(自然科学版)》2007,37(3):497-502,496

首次将多维联合概率理论应用到三峡大坝设计洪水的风险分析,并用随机模拟方法(ISPUD)对四维联合概率分布进行了求解,得出在长江上游干流及主要支流来水量出现的不同组合和最不利组合情况下,相应三峡大坝不同联合重现期的设计洪水。可用于三峡工程的风险分析及防洪调度。  相似文献   

闽江口水动力和污染扩散数值模拟   总被引：3，自引：0，他引：3  

江毓武  张珞平 《台湾海峡》1997,16(2):169-173

本文建立了闽江口二维水动力、污染扩散数值模型，模型采用ＡＤＩ双向隐式求解。在水动力模拟中，对岸界的丁坝有用线性边界进行拟合，并考虑到河口区侧向摩擦作用；在污染扩散模拟中，用动态拟合的方法对浓度水边界进行了较为合理的改进。计算结果表明，本模型是成功的。  相似文献   

渤、黄、东海内潮的数值模拟   总被引：2，自引：0，他引：2  

姜波  吕咸青 《海洋湖沼通报》2007,30(1):30-37

在全球的海洋中,中国东海和临近海域是最显著的内潮生成地之一。本文采用NODC(Levitus) World Ocean Atlas 1998提供的季平均温、盐资料,计算海水的密度,并计算垂向密度梯度的最大值点,得到一个较符合海水实际的密度分层。使用三维非线性数值模型(将海洋分为2层)研究了潮汐(M2,S2,K1,O1分潮)作用下渤黄东海的内潮,揭示了整个海区内潮起伏的空间分布,结果发现大振幅的波动均发生在台湾东北(冲绳海槽)海域和中国近海地形突变之处,其中前者更显著。对于各分潮模拟得到的表面潮与TOPEX/Poseidon高度计资料基本一致。研究结果表明上层海水的深度和厚度的梯度对内潮有一定的影响;冬季分布区域比夏季小,强度比夏季大。  相似文献   

南海北部外陆架和上陆坡海底滑坡稳定性研究   总被引：9，自引：0，他引：9  

冯文科  陈玲辉 《海洋地质与第四纪地质》1994,14(2):89-94

海洋工程地质调查发现，在南海北部外陆架和上陆坡海底，有大片滑坡，其水深范围约在１８０－６５０ｍ之间，它们沿着陆架外缘坡折处呈北东－南西方向分布，其具体位置往往与古三角洲前缘的海底陡坎及古海岸线位置密切相关，大量浅层地震，旁侧声纳，底质取样分析和土体力学理论计算表明，本区滑坡主要是由于地形坡度，沉积物特性，土体自身重力，它们是区内海底很不稳定的地带，是一种重要的地灾害因素，在海洋工程地质设计和实施时  相似文献   

径流量和潮量的减小对河口与河口湾型通道地形演变的影响——以神泉、乌坎通道为例     

王文介 《海洋科学》1992,16(6):54-57

以神泉通道和乌坎通道的演变实例说明,河口型与河口湾型通道的形成和演变受径流量或潮流量的制约。而人为作用使径流量或潮流量减小,导致通道地形急剧演变和稳定程序变差。因此必须保持径流来量或纳潮量不变。但对不同类型的通道要作具体分析。  相似文献   

迎风有限元法在三维潮流数值模拟中的应用   总被引：4，自引：0，他引：4  

董文军  陈虹 《海洋与湖沼》1997,28(3):320-327

为研究和开发迎风有限元法在河口海岸三维波数值模拟中的应用，并为建立三维物质扩散模型，最终为解决实际工程问题打下基础，以非线性浅水波方程为基础，采用一咱平面迎风有奶元与垂向工有限差分相结合地数值计算方法建立三维潮流数学模型，基地实际的物理过程，在计算中将三维流动分成外重力波和内重力波，耦联求解潮位和流速的空间分布。应用本模式计算了天津新港附近渤海海域的三维潮流运动，以较高的分辩率揭示了潮流空间结构特  相似文献   

Numerical simulation of random wave slamming on structures in the splash zone   总被引：4，自引：0，他引：4  

Bing Ren  Yongxue Wang 《Ocean Engineering》2004,31(5-6):547-560

The numerical investigation of random wave slamming on superstructures of marine structures in the splash zone is presented in this paper. The impact pressures on the underside of the structure are computed based on the improved volume of fluid method (VOF). The governing equations are Reynolds time-averaged equations and the two equation k– model. The third order upwind difference scheme is applied to the convection term to reduce the effect of numerical viscosity. The numerical wave flume with random wave-maker suitable for VOF is established. Appropriate moving contact-line boundary conditions are introduced to the model wave in contact with and separated from the underside of structure. Parametric studies have been carried out for different incident waves, structure dimensions and structure clearance. The numerical results are verified by the experimental results.  相似文献   

Channelled erosion through a marine dump site of dredge spoils at the mouth of the Puyallup River, Washington State, USA     

Neil C. Mitchell   《Marine Geology》2005,220(1-4):131-151

Channels are relatively common on river-mouth deltas, but the process by which they arise from river sediment discharge is unclear because they can potentially be explained either by negatively buoyant (hyperpycnal) flows produced directly from the river outflow or by flows generated by repeated failure and mobilisation of sediment rapidly deposited at the delta front. Channels eroded through a dump site of dredge spoils are described here from multibeam and older sonar data collected in Commencement Bay, at the mouth of the Puyallup River. Shallow channels on the seaward upper surface of the dump site, away from any flows that could have been produced by delta front failures, suggest that at least some hyperpycnal flows were produced directly from the positively buoyant river outflow up to 200 m from the edge of the river mouth platform. The form of channel bed erosion is revealed by the longitudinal shape of the main eroded channel compared with the adjacent dump site profile. It suggests that the channel evolved by its steep front retreating, rather than by simple vertical entrenchment or diffusive-like evolution of the profile, a geometry interpreted as evidence that repeated failure of the bed occurred in response to shear stress imposed by bottom-travelling flows. Model calculations based on shear strengths back-calculated from the geometry of channel wall failures suggest that, if the main channel were eroded solely by hyperpycnal flows, their generation was remarkably efficient in order to create flows vigorous enough to cause channel bed failure. Besides the sediment concentration and discharge characteristics that have been considered to dictate the ability of rivers to produce hyperpycnal flows, it is suggested that the timing of floods with respect to the tidal cycle should also be important because extreme low tides may be needed to ensure that coarse sediment is transferred vigorously to the edge of river mouth platforms.  相似文献   

湍流数值模拟中封闭模式应用的局限性   总被引：1，自引：0，他引：1  

蔡树群  王文质 《海洋工程》2001,19(1):84-87

通过对琼州海峡的潮流场特征进行数值模拟，指出了选择不同的特征混合长度表达式对数值模拟结果的影响，表明了基于特征混合长度理论的流封闭模式在近海湍流数值模拟中应用的局限性。  相似文献