GPS/PWV时间序列特征提取方法的研究     

胡广保  叶世榕  张彦祥  夏朋飞  夏凤雨 《大地测量与地球动力学》2019,39(1):36-40

针对GAMIT/GLOBK软件解算得到的4 a GPS/PWV时间序列的特征提取问题，提出基于滤波辅助的部分集成经验模态分解（PEEMD）与Hilbert谱分析相结合的特征提取方法。首先，在PEEMD方法的基础上,结合滤波辅助的PEEMD方法与Hilbert谱分析，建立GPS/PWV时间序列特征提取模型；然后，将所提出的方法应用于TNML测站4 a的GPS/PWV长时间序列和7 d的GPS/PWV短时间序列分析中，并将滤波辅助的PEEMD结果与传统的小波分解结果进行对比。结果表明，该特征提取方法能准确有效地提取出 GPS/PWV时间序列中的周年周期和日周期特征分量，滤波辅助的PEEMD分解结果与小波分解结果一致，且提取的特征分量与原始信号更加吻合。  相似文献   

基于平均分组和叠加相关的GPS信号捕获方法     

杨久东  吴风华  王文军 《大地测量与地球动力学》2018,38(8):828-831

针对目前GPS软件接收机C/A码捕获信噪比门限高、捕获速度慢的问题，提出一种基于平均分组和叠加相关的GPS弱信号捕获方法。首先，基于平均相关处理技术降低C/A码捕获过程中的自相关损耗，提高对微弱信号的捕获能力；然后，利用叠加相关提高相干运算的运算效率，并采用线性插值提高自相关函数性能；最后，利用频偏校正和内插进一步提高C/A信号的捕获精度。理论分析和仿真实验均验证，该方法能够在较低的信噪比下实现GPS信号捕获，且精度较高、运算量较低。  相似文献   

Duluth Complex apatites: Age reference material for LA–ICP–MS‐based fission‐track dating     

Hideki Iwano  Tohru Danhara  Takashi Yuguchi  Takafumi Hirata  Masatsugu Ogasawara 《地学学报》2019,31(3):247-256

Anorthositic series apatites of the Duluth Complex, Minnesota, USA, have high spontaneous fission‐track densities of up to ~10⁷ cm^–2 and a homogeneous age of ~900 Ma, allowing high‐precision fission‐track dating based on LA–ICP–MS U analysis. Absolute fission‐track dating, track‐length measurement and chemical composition analysis were performed to evaluate a cooling history, which is essential for age reference materials. Preliminary inverse modelling for a sample with a shortened track‐length distribution yielded a monotonic cooling history from ~100°C at 925 Ma. The apatites incur an over‐etching problem when employing the commonly used etching protocol involving 5.5 M HNO₃.  相似文献   

Copper Isotopic Analysis in Geological and Biological Reference Materials by MC‐ICP‐MS     

Kaj Sullivan  Daniel Layton‐Matthews  Matthew Leybourne  James Kidder  Zoltn Mester  Lu Yang 《Geostandards and Geoanalytical Research》2020,44(2):349-362

The characterisation of relative copper isotope amount ratios (δ⁶⁵Cu) helps constrain a variety of geochemical processes occurring in the geosphere, biosphere and hydrosphere. The accurate and precise determination of δ⁶⁵Cu in matrix reference materials is crucial in the effort to validate measurement methods. With the goal of expanding the number and variety of available geological and biological materials, we have characterised the δ⁶⁵Cu values of ten reference materials by MC‐ICP‐MS using C‐SSBIN model for mass bias correction. SGR‐1b (Green River shale), DOLT‐5 (dogfish liver), DORM‐4 (fish protein), TORT‐3 (lobster hepatopancreas), MESS‐4 (marine sediment) and PACS‐3 (marine sediment) have for the first time been characterised for δ⁶⁵Cu. Additionally, four reference materials (with published δ⁶⁵Cu values) have been characterised: BHVO‐1 (Hawaiian basalt), BIR‐1 (Icelandic basalt), W‐2a (diabase) and Seronorm? Trace Elements Serum L‐1 (human serum). The reference materials measured in this study possess complex and varied matrices with copper mass fractions ranging from 1.2 µg g^?1 to 497 µg g^?1 and δ⁶⁵Cu values ranging from ?0.20‰ to 0.52‰ with a mean expanded uncertainty of ± 0.07‰ (U, k = 2), covering much of the natural copper isotope variability observed in the environment.  相似文献   

岛屿海岸线自动化提取及其时空变迁研究——以大连市獐子岛为例   总被引：1，自引：1，他引：0  

丁小松  单秀娟  陈云龙  金显仕  杨涛 《海洋科学》2018,42(2):46-55

海岸带是受人类活动和全球海平面上升影响的敏感地带,海岸线的提取和监测是海岸带生态系统研究和社会管理的重要内容。本文在遥感和地理信息系统的支持下,以修正的归一化水体指数(Modified Normalized Difference Water Index,MNDWI)为基础,结合遥感影像处理和直方图均衡化等技术,实现了大连市獐子岛1985—2016年海岸线的自动化提取。结果表明:(1)通过与三位专家目视解译的成果比对,本文提取海岸线的精度能满足后续研究的要求(相对误差分别为0.045%,0.032%和0.023%);(2)近30年来,獐子岛海岸线总体呈现蚀退趋势,岸线长度与岛屿面积分别呈现变短和变小的趋势,獐子岛(主岛)和大耗岛的岸线蚀退速率最大,褡裢岛次之,小耗岛最小;在人类活动较为密集的区域,海岸线呈现出较为强烈的增长趋势,海水养殖和圈海建坝是岸线增长的主要驱动力;(3)獐子岛海岸线具有显著的分形性质,分形维数随时间呈现增大的趋势,獐子岛(主岛)的分形维数最大,褡裢岛的分形维数最小。  相似文献   

Tectonostratigraphic framework and depositional history of the deepwater Ulleung Basin,East Sea/Sea of Japan     

Kyoung-Jin Kim  Dong-Geun Yoo  Nyeon-Keon Kang  Bo-Yeon Yi 《Basin Research》2020,32(4):613-635

The Ulleung Basin, East Sea/Japan Sea, is a Neogene back-arc basin and occupies a tectonically crucial zone under the influence of relative motions between Eurasian, Pacific and Philippine Sea plates. However, the link between tectonics and sedimentation remains poorly understood in the back-arc Ulleung Basin, as it does in many other back-arc basins as well, because of a paucity of seismic data and controversy over the tectonic history of the basin. This paper presents an integrated tectonostratigraphic and sedimentary evolution in the deepwater Ulleung Basin using 2D multichannel seismic reflection data. The sedimentary succession within the deepwater Ulleung Basin is divided into four second-order seismic megasequences (MS1 to MS4). Detailed seismic stratigraphy interpretation of the four megasequences suggests the depositional history of the deepwater Ulleung Basin occurred in four stages, controlled by tectonic movement, volcanism, and sea-level fluctuations. In Stage 1 (late Oligocene through early Miocene), syn-rift sediment supplied to the basin was restricted to the southern base-of-slope, whereas the northern distal part of the basin was dominated by volcanic sills and lava flows derived from initial rifting-related volcanism. In Stage 2 (late early Miocene through middle Miocene), volcanic extrusion occurred through post-rift, chain volcanism in the earliest time, followed by hemipelagic and turbidite sedimentation in a quiescent open marine setting. In Stage 3 (late middle Miocene through late Miocene), compressional activity was predominant throughout the Ulleung Basin, resulting in regional uplift and sub-aerial erosion/denudation of the southern shelf of the basin, which provided enormous volumes of sediment into the basin through mass transport processes. In Stage 4 (early Pliocene through present), although the degree of tectonic stress decreased significantly, mass movement was still generated by sea-level fluctuations as well as compressional tectonic movement, resulting in stacked mass transport deposits along the southern basin margin. We propose a new depositional history model for the deepwater Ulleung Basin and provide a window into understanding how tectonic, volcanic and eustatic interactions control sedimentation in back-arc basins.  相似文献   

海洋表层沉积物中金属镉的来源解析     

谭赛章  杨涛  可愚  刘材材  张昊飞 《海洋通报》2019,38(6):683-689

利用2015年8月份对长江口及其邻近海域表层沉积物的监测数据,基于主成分分析/绝对主成分分数(PCA/APCS)受体模型定量解析了重金属元素镉(Cd)的可能来源,并结合地统计学插值了Cd的源贡献量的空间分布状况,结果表明沉积物中镉污染主要存在3个可能来源,源头及贡献率分别为工业污染(18.8%)、陆地径流输入(66.0%)、生物活动等自然因素(13.6%),并且各个源头贡献量具有不同的空间分布状况,其中工业污染的高值区主要集中在靠近陆地区域,陆地径流输入的分布呈现由近岸向外海逐减降低的特征,生物活动等自然因素的高值区主要集中在远离陆地的外海区域。  相似文献   

中国绿洲城市土地利用/覆盖变化研究进展          下载免费PDF全文

王一航  夏沛  刘志锋  卢文路  何春阳 《干旱区地理》2019,42(2):341-353

绿洲城市是干旱区人类生产和生活的集聚中心，也是人地关系最为敏感的区域之一。了解绿洲城市土地利用/覆盖变化的研究进展对于改善区域人地关系、促进绿洲城市可持续发展具有重要意义。利用系统综述方法，对研究我国绿洲城市土地利用/覆盖变化的相关文献进行梳理，在综述已有研究进展的基础上，探讨了已有研究存在的不足并对未来研究方向进行展望。绿洲城市土地利用/覆盖变化研究的相关文献数量和被引频次均呈增长趋势。已有研究主要在局地尺度上分析了绿洲城市土地利用/覆盖变化的过程、驱动机制和生态环境效应，关于绿洲城市可持续性和基于区域尺度的相关研究较少。因此，未来应在多个尺度上开展工作，综合研究绿洲城市土地利用/覆盖变化的过程、影响和可持续性。  相似文献   

Chemical Procedures for Rhenium Extraction from Geological Samples: Optimising the Anion Resin Bead Clean‐up Step     

Gang Yang  Aaron Zimmerman  Nicole C. Hurtig  Svetoslav V. Georgiev  Vineet Goswami  Judith L. Hannah  Holly J. Stein 《Geostandards and Geoanalytical Research》2020,44(2):231-242

Rhenium–osmium geochronometry for samples with low Re and complex matrices requires improved Re extraction methods. Here, we investigate plausible controls on efficiency and efficacy of Re extraction during our anion resin bead purification. Four different protocols are compared, each isolating a single variable to test. Rhenium concentrations for solutions at each step of each protocol document differences in chemical recovery/yield. The negative‐thermal ionisation mass spectrometry (N‐TIMS) signal intensity serves as a proxy for Re yield and purity. These data document correlations between the N‐TIMS signal intensity and (a) the duration of anion resin bead conditioning prior to loading with Re‐bearing solution, and (b) both duration and strength of nitric acid used during rinsing of the Re‐loaded anion resin bead. The optimal protocol improved Re signal intensity around fourteen times compared with our current Re extraction protocol, an aggregate of 2.4 times improvement in chemical recovery (yield) and 5.8 times improvement in emission efficiency (purity). Repeated N‐TIMS isotopic measurements on our in‐house Re standard solution (1407) verify that our optimal protocol‐3 does not fractionate Re isotopes. The improved anion resin bead method considerably lowers the Re detection limit and allows Re‐Os isotopic analysis of picogram‐level Re hosted in geological samples with complex matrices.  相似文献   

VIIRS/DNB夜间灯光月度产品插补方法对比——以北京为例     

陈慕琳  蔡红艳 《地理科学进展》2019,38(1):126-138

新一代VIIRS/DNB(Visible Infrared Imaging Radiometer Suite Day/Night Band)夜间灯光数据因其具备更精细的时空分辨率、数据不存在饱和现象、不同年份数据可比性强等优点而迅速代替DMSP/OLS(Defense Meteorological Satellite Program's Operational Linescan System)夜间灯光数据成为新的研究热点。但由于杂散光的污染,VIIRS/DNB夏季数据数值缺失严重,致使数据在空间和时间上不连续,因此,插补缺失数据成为后续应用的前提。鉴于此,论文从插补结果异常值、与参照值对比、计算性能三个方面,系统比较了三次样条插值(样条)、三次Hermite插值(Hermite)、灰色预测模型(GM)、三次指数平滑法(指数)4种插补方法的适用性,以期为插补VIIRS/DNB夜间灯光数据提供方法选择的依据。研究结果表明：①异常值比较方面,Hermite法未出现异常值,另外3种算法仅出现少量异常值(0.02%~1.34%);②与参照值的对比方面,Hermite法与参考值接近程度最高,GM接近程度最低,样条法和指数法介于两者中间;③算法性能比较方面,4种方法都具备计算简单、容易编程的特点,但指数法的算法时长是另外3种方法的10倍以上。因此,综合多方表现,当插补月份前后两侧均有足够长的原始数据时,插补效果好、计算速度快、不会出现过冲现象的Hermite法最适宜,样条法次之;当插补月份仅单侧有足够长的数据时,适宜采用指数法(插补效果好、计算速度较慢)或GM(插补效果偏低、计算速度快)进行插补。  相似文献