Modeling of RC columns strengthened with RC jackets     

A. P. Lampropoulos  S. E. Dritsos 《地震工程与结构动力学》2011,40(15):1689-1705

Constructing concrete jackets is a common technique when strengthening reinforced concrete (RC) columns, particularly in seismic regions. However, there are many uncertainties concerning the behavior of the composite specimen, particularly at the interface between the old and new concrete. In this paper, monotonic finite element (FE) analyses are performed to examine the behavior of strengthened columns under monotonic and cyclic loading. Through investigating two independent series of experimental results, it is demonstrated that monotonic FE analysis with appropriate assumptions can simulate both monotonic and cyclic loading conditions to a reasonable degree of accuracy. According to the results of this study, it is found that a simulation of the interface between the old and the new concrete is vital and cannot be ignored by simply considering a perfect bond at the interface. In the case of strengthened RC columns subjected to cyclic loading, strength degradation at the interface has to be included and can be effectively modeled by reducing the coefficients of friction and adhesion by using a proposed formula. Finally, the effect of jacket concrete shrinkage is simulated that leads to a reduced maximum load and stiffness of strengthened columns. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Reconstruction of sub-wavelength fractures and physical properties of masonry media using full-waveform inversion of proximal penetrating radar   总被引：1，自引：0，他引：1  

Claudio Patriarca  Sbastien Lambot  M.R. Mahmoudzadeh  Julien Minet  Evert Slob 《Journal of Applied Geophysics》2011,74(1):26-37

  相似文献   

预制装配式剪力墙结构墙板节点抗震性能研究   总被引：2，自引：1，他引：1  

朱张峰  郭正兴 《地震工程与工程振动》2011,31(1):35-40

为掌握预制装配式剪力墙结构墙板节点的抗震性能,对2个现浇试件和2个预制装配式试件进行了拟静力试验.结合非线性分析手段,从承载能力、变形能力、受力机理以及破坏模式等方面综合分析了其抗震性能,并初步探讨了墙板连接钢筋的合理直径.分析结果表明:与现浇试件相比,预制装配式试件承载能力较高,位移延性系数相同,滞同环均较饱满,具有...  相似文献   

钢管混凝土叠合柱边框内藏钢桁架核心筒抗震性能试验研究   总被引：1，自引：1，他引：0  

董宏英  杨信强  曹万林  张建伟  耿海霞 《地震工程与工程振动》2011,31(1)

为进一步改善混凝土核心简的抗震性能,本文提出了钢管混凝土叠合柱边框内藏钢桁架组合核心筒.进行了2个1/6缩尺的核心筒模型在低周反复荷载下的抗震性能试验研究,1个为钢管混凝土叠合柱边框毛组合核心筒,1个为钢管混凝土叠合柱边框内藏钢桁架组合核心筒.通过试验,对比分析了2个核心简的承载力、延性、刚度及其衰减、滞回特性、耗能能力及破坏特征,给出了钢管混凝土叠合柱边框内藏钢桁架组合核心筒的承载力计算模型,计算结果与实测值符合较好.研究表明,钢管混凝土叠合柱边框内藏钢桁架组合核心筒与钢管混凝土叠合柱边框组合核心筒相比,其抗震性能明显提高.  相似文献   

小剪跨比格构式混凝土墙体抗震性能试验     

周静海  王鹏里  孟宪宏  朱静雯  侯延泽  张志伟 《地震工程与工程振动》2011,31(3):127-133

文章旨在研究不同剪跨比的格构式混凝土墙体抗震性能.将生产车间预制成EPS保温模块拼接成墙体模板,在横向和纵向孔洞中分别布置钢筋,然后在孔内浇筑自密实混凝土,形成“EPS新型节能”格构式混凝土墙体,然后对6个参数不同的试件进行低周反复水平荷载作用的试验.结果,墙体破坏形态为:首先墙体相邻格构柱间的连梁出现环状裂缝和“X”...  相似文献   

Study of bond stress–slip relationship and radial dilation in prestressed concrete     

José Mª Benítez  J.C. Gálvez  M.J. Casati 《国际地质力学数值与分析法杂志》2013,37(16):2706-2726

This paper presents two test procedures for evaluating the bond stress–slip and the slip–radial dilation relationships when the prestressing force is transmitted by releasing the steel (wire or strand) in precast prestressed elements. The bond stress–slip relationship is obtained with short length specimens, to guarantee uniform bond stress, for three depths of the wire indentation (shallow, medium and deep). An analytical model for bond stress–slip relationship is proposed and compared with the experimental results. The model is also compared with the experimental results of other researchers. Since numerical models for studying bond‐splitting problems in prestressed concrete require experimental data about dilatancy angle (radial dilation), a test procedure is proposed to evaluate these parameters. The obtained values of the radial dilation are compared with the prior estimated by numerical modelling and good agreement is reached. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Review and enhancement of 3D concrete models for large‐scale numerical simulations of concrete structures     

B. Valentini  G. Hofstetter 《国际地质力学数值与分析法杂志》2013,37(3):221-246

The present paper focuses on selected plasticity and damage‐plasticity models for describing the 3D material behavior of concrete. In particular, a plasticity model and a damage‐plasticity model are reviewed and evaluated. Based on the results of the evaluation, enhancements are proposed, aiming at improving the correspondence between predicted and observed material behavior and aiming at implementing a robust and efficient stress update algorithm in a finite element program for performing large‐scale 3D numerical simulations of concrete structures. The capabilities of the concrete models are demonstrated by 3D numerical simulations of benchmark tests with combined bending and torsional loading and combined compression and shear loading and by a large‐scale 3D finite element analysis of a model test of a concrete arch dam. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Modelling the flow of self‐compacting concrete     

S. Kulasegaram  B. L. Karihaloo  A. Ghanbari 《国际地质力学数值与分析法杂志》2011,35(6):713-723

A Lagrangian particle‐based method, smooth particle hydrodynamics (SPH), is used in this paper to model the flow of self‐compacting concretes (SCC) with or without short steel fibres. An incompressible SPH method is presented to simulate the flow of such non‐Newtonian fluids whose behaviour is described by a Bingham‐type model, in which the kink in the shear stress vs shear strain rate diagram is first appropriately smoothed out. The viscosity of the SCC is predicted from the measured viscosity of the paste using micromechanical models in which the second phase aggregates are treated as rigid spheres and the short steel fibres as slender rigid bodies. The basic equations solved in the SPH are the incompressible mass conservation and Navier–Stokes equations. The solution procedure uses prediction–correction fractional steps with the temporal velocity field integrated forward in time without enforcing incompressibility in the prediction step. The resulting temporal velocity field is then implicitly projected on to a divergence‐free space to satisfy incompressibility through a pressure Poisson equation derived from an approximate pressure projection. The results of the numerical simulation are benchmarked against actual slump tests carried out in the laboratory. The numerical results are in excellent agreement with test results, thus demonstrating the capability of SPH and a proper rheological model to predict SCC flow and mould‐filling behaviour. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Cohesive‐frictional model for bond and splitting action of prestressing wire     

J. C. Gálvez  J. M. Benítez  M. J. Casati  B. S. Tork  D. A. Cendón 《国际地质力学数值与分析法杂志》2011,35(11):1257-1277

This paper presents a numerical procedure for bond between indented wires and concrete, and the coupled splitting process of the surrounding concrete. The bond model is an interface, non‐associative, plasticity model. It is coupled with a cohesive fracture model for concrete to take into account the splitting of such concrete. Bond between steel and concrete is fundamental for the transmission of stresses between both materials in precast prestressed concrete. Indented wires are used to improve the bond in these structural elements. The radial component of the prestressing force, increased by Poisson's effect, may split the surrounding concrete, decreasing the wire confinement and diminishing the bonding. The combined action of the bond and the splitting is studied with the proposed model. The results of the numerical model are compared with the results of a series of tests, such as those which showed splitting induced by the bond between wire and concrete. Tests with different steel indentation depths were performed. The numerical procedure accurately reproduces the experimental records and improves knowledge of this complex process. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

大石峡高面板坝筑坝砂砾料现场大型相对密度试验     

董承山  杨正权  王龙  何冰  刘莹光 《吉林大学学报(地球科学版)》2018,48(5):1603

当前,主要采用相对密度来表征筑坝砂砾料的密实程度,并以此来评价大坝的施工碾压质量。受试验设备尺寸和击实功能的限制,室内试验难以反映现场实际筑坝砂砾料粒径大、采用大型碾压机具进行高强度碾压的实际情况,试验确定砂砾料最大干密度值偏低,难以直接用于指导实际工程。针对大石峡高面板坝筑坝砂砾料,在工地现场采用实际筑坝碾压设备和大型相对密度桶,对原级配坝料开展相对密度试验,研究了坝料的压实特性,确定了不同级配（含砾量）坝料的相对密度特性指标。研究表明：比较室内试验成果,现场试验确定砂砾料最大干密度值有较大提高;随着含砾量的增加,砂砾料的最大、最小干密度值先增加、后减小,存在压实密度最高的最优含砾量特征值;强振碾压使得弱胶结砂砾料产生不同程度的颗粒破碎效应,颗粒破碎的程度和土料的原始级配特性相关联。  相似文献