基于沉积过程的数字岩石建模方法研究          下载免费PDF全文

田志  肖立志  廖广志  董虎  田守嶒  宋先知 《地球物理学报》2019,62(1):248-259

本文提出模拟地层沉积及成岩过程的矿物沉积算法,建立数字岩石模型,并通过对比Micro-CT扫描图像和数值模型的局部孔隙度及平均渗流概率函数分布特征,评价建模的准确性.结果表明,由二维扫描提取的粒径信息作为输入参数,模拟矿物沉积过程建模得到的三维数字岩石模型,能够准确重构原始岩心的非均质性及渗流特性,成功应用于泥质砂岩、碳酸盐岩、页岩等存在多矿物或多尺度孔隙的数字岩石建模中.数字岩石物理是正在兴起的重要技术.数字岩石采用超高分辨率先进成像装备,采集和表征微纳尺度岩石结构,在岩石弹性、电性、核磁、渗流特性等数值计算中发挥重要作用.但是,由于三维直接成像在有限视域内难以表征足够的岩石非均质性,提取二维结构统计特征,利用统计或地质过程法重构具有代表性的三维岩石结构成为十分有价值的研究课题,而且,对业界大量存在的岩石薄片及电镜高清二维图像的深度开发应用也具有重要的现实意义.本文发展的新方法,复原沉积过程,较好地解决了孔隙尺度岩石物理定量研究中数值建模与理论计算的技术瓶颈.  相似文献   

复杂地形景区三维导览图的设计与实现     

吴思锴  李百寿  郭家豪  李雪  张卫平 《北京测绘》2020,(1):38-43

为满足复杂地形景区对三维地图导览的需求,构建更为清晰的三维地图模型,提供良好的三维导览地图设计方案显得尤为重要。为了更好地与卫星影像进行贴合,DEM数据的采样密度要与卫星影像的分辨率一致。本文通过对比当下常用的四种空间插值方法的适用范围与运用特点,设置相关阈值及权重,直观比较了四种插值方法产生的插值结果,选择更适合复杂景区DEM插值的插值方法并对其进行精度提升,以此得到符合精度要求的DEM数据。最后利用相应地区的卫星影像进行地图投影及影像贴图,两种数据结合构建复杂景区的三维地图模型,给游客带来更为精确直观的定位信息和空间要素信息。  相似文献   

黄土高原沟谷地貌发育演化研究进展与展望     

熊礼阳  汤国安 《地球信息科学学报》2020,22(4):816-826

黄土沟谷是黄土地貌中最有活力、最具变化、最富特色的对象单元,黄土高原千沟万壑的地貌形态以及触目惊心的侵蚀状态也让区域内沟谷地貌的形成、发育及演化问题成为研究中焦点及前沿性科学问题。近年来,诸多学者采用地学测年法、特征表达法、监测模拟法力图实现对黄土沟谷发育演化进程中“过去-现代-未来”的科学认知。这些研究在相当程度上丰富了黄土沟谷发育过程的认知。本文梳理了黄土高原沟谷地貌演化相关研究的现状,并从黄土高原地貌演化、黄土沟谷发育、基于DEM的沟谷信息提取与表达等研究进行了系统的回顾、梳理与分析。此外,本文提出“黄土沟道剖面群组”概念与方法,试图从新的视角审视黄土沟谷地貌发育演化过程。沟道剖面在黄土沟谷发育演化进程中传递物质能量和累积地形动力,并通过径流节点的串联实现剖面群的连接与组合,形成独特的剖面“群组”模式;该沟道剖面群组是集黄土沟谷地貌特征与过程于一体的综合信息集成体,其三维空间结构是对黄土沟谷地貌发育演化的高度抽象与映射,并可望进一步丰富黄土高原数字地形分析理论与方法体系,为黄土高原黄土地貌成因机理与空间分异格局带来创新的认识。  相似文献   

应用经验正交函数估算顶部电离层电子密度剖面          下载免费PDF全文

王林  万卫星  乐新安  任志鹏  佘承莉 《地球物理学报》2019,62(5):1582-1590

本文基于IRI模型、地面数字测高仪和GNSS TEC数据,提出了一种利用经验正交函数(Empirical Orthogonal Function,简称EOF)估算顶部电离层电子密度剖面的方法,并将其应用于美国Millstone Hill测高仪和GNSS数据以估算顶部电离层电子密度剖面.通过将估算的临界频率、峰值高度、400km以上电子密度分别与测高仪实测临界频率、测高仪实测峰值高度以及非相干散射雷达实测400km以上电子密度作对比以对方法的有效性进行验证.统计结果显示估算临界频率、峰值高度与测高仪实测数据基本一致,400km以上估算电子密度相较于非相干散射雷达实测的绝对误差平均值仅是测高仪推算400km以上电子密度绝对误差平均值的一半左右.所以本文提出的方法可以更加精确地估算顶部电离层电子密度.  相似文献   

Automatic Sounding Generalization in Nautical Chart Considering Bathymetry Complexity Variations     

Wenhao Yu 《Marine Geodesy》2018,41(1):68-85

Sounding acts as the main feature in a digital nautical chart as it describes the concerned marine topography for the safety of navigation. Unlike the geometry-oriented selection of point feature, the generalization of soundings for chart compiling is expected to be context-oriented, which means bathymetry complexity variations across the study region should be preserved in the sounding selection process. However, such variations are not explicitly accessible to automated systems. This paper proposes an approach that effectively analyzes and measures bathymetry complexity from sounding data, with a focus on topography variations among different regions. The presented approach first divides the exploring region into several subregions, by adopting techniques of computational geometry and graph theory. Then, the approach quantitatively measures the bathymetry complexity of the subregions from grid-based digital terrain model. Finally, a composite bathymetry complexity index integrating aspects of steepness and depth variation is developed to guide the operation of sounding selection in different subregions. Generally, when seafloor is rugged with steep slopes, the number of soundings is high. While in flatter areas, a smaller amount of soundings is retained. The potential of our approach is demonstrated by an application to a real data set.  相似文献   

The Digital Belt and Road program in support of regional sustainability     

Huadong Guo  Yubao Qiu  Massimo Menenti  Fang Chen  Paul F. Uhlir 《International Journal of Digital Earth》2018,11(7):657-669

The Belt and Road initiative has a significant focus on infrastructure, trade, and economic development across a vast region, and it also provides significant opportunities for sustainable development. The combined pressure of climate variability, intensified use of resources, and the fragility of ecosystems make it very challenging, however, to achieve future sustainability. To develop the path in a sustainable way, it is important to have a comprehensive understanding of these issues across nations and evaluate them in a scientific and well-informed approach. In this context, the Digital Belt and Road (DBAR) program was initiated as an international venture to share expertise, knowledge, technologies, and data to demonstrate the role of Earth observation science and technology and big Earth data applications to support large-scale development. In this paper, we identify pressing challenges, present the research priorities and foci of the DBAR program, and propose solutions where big Earth data can make significant contributions. This paper calls for further joint actions and collaboration to build a digital silk road in support of sustainable development at national, regional and global levels.  相似文献   

Numerical determination of pressure-dependent effective thermal conductivity in Berea sandstone     

Mirko Siegert  Marcel Gurris  Claudia Finger  Erik H. Saenger 《Geophysical Prospecting》2022,70(1):152-172

In this paper, the methods of digital rock physics are applied to determine pressure-dependent effective thermal conductivity in rock samples. Simulations are performed with an in-house three-dimensional finite volume code. In the first step, four numerical models are derived from a given tomographic scan of Berea sandstone. Consequently, simulations of the thermal conductivity at ambient conditions are performed and validated with experimental data. In a second step, a new workflow for the determination of the pressure-dependent thermal conductivity in rock samples is elaborated, tested and calibrated. Results originating from the derived workflow show very good agreement with experimental data.  相似文献   

Preliminary Analysis of the Relationship between the Magnitude Deviation of the Station and Site Response in the Fujian Digital Seismic Network     

Yang Gui  Xu Zhendong  Lin Binhua 《中国地震研究》2017,31(2):257-268

Using the records of 3,069 regional earthquake events from the Fujian Digital Seismic Network from October 2008 to December 2015,in which the magnitude of each of the events was measured by at least six stations,statistics are taken on the deviation between the magnitude of a single station and the average magnitude of the network. It is found that the magnitudes average deviation of each station is-0. 31-0. 68. Statistics are also taken for the period corresponding to the maximum amplitude of the record measured in each station for calculating the magnitude,and the dominant period gained is 0. 06s-0. 38s; site response of each seismic station is inverted using the Moya method,and it is found that the site response of 98 stations is in the bands of 1-20 Hz,suggesting that the site has an amplifying or suppressing effect on the signals in certain frequency bands;Considering the site response corresponding to the inherent 0. 8s period of the WoodAnderson pendulum seismograph,and comparing the magnitude deviation caused by the site response corresponding to the dominant period time of each station with the average magnitude deviation, we obtain that there is a good linear relationship between the magnitude deviation from the dominant period site response and the average deviation of the magnitude of each station,indicating that the magnitude deviation of a single station has a close relationship with the site response of the period corresponding to the maximum amplitude measured for calculating the magnitude.  相似文献   

江西地区地方性震级的量规函数与台基校正值研究   总被引：1，自引：0，他引：1  

项月文  陈浩  肖孟仁  曾文敬  肖健 《中国地震》2018,34(1):122-132

本文采用《江西测震台网地震观测报告》,选取2007年10月~2015年12月所记录的499次M_L≥1.5地震事件,对各子台测定震级与台网平均震级偏差进行定量的统计分析,从震级偏差频次分布、量规函数、台基、方位角等方面分析产生震级偏差的原因。在对量规函数和台基进行校正后,震级偏差绝对值在0.2以内的样本数达到了68.6%,并给出了适合江西地区的量规函数和台基校正值。  相似文献   

The Co-seismic Response of Underground Fluid in Yunnan to the Nepal MS8.1 Earthquake     

Zhang Li  Su Youjin  Luo Ruijie  Gao Wenfei  Zhang Ping 《中国地震研究》2017,31(2):201-212

In this paper, statistics are taken on the co-seismic response of underground fluid in Yunnan to the Nepal M_S8.1 earthquake, and the co-seismic response characteristics of the water level and water temperature are analyzed and summarized with the digital data. The results show that the Nepal M_S8.1 earthquake had greater impact on the Yunnan region, and the macro and micro dynamics of fluids showed significant co-seismic response. The earthquake recording capacity of water level and temperature measurement is significantly higher than that of water radon and water quality to this large earthquake; the maximum amplitude and duration of co-seismic response of water level and water temperature vary greatly in different wells. The changing forms are dominated by fluctuation and step rise in water level, and a rising or falling restoration in water temperature. From the records of the main shock and the maximum strong aftershock,we can see that the greater magnitude of earthquake, the higher ratio of the occurrence of co-seismic response, and in the same well, the larger the response amplitude, as well as the longer the duration. The amplitude and duration of co-seismic response recorded by different instruments in a same well are different.Water temperature co-seismic response almost occurred in wells with water level response, indicating that the well water level and water temperature are closely related in co-seismic response, and the well water temperature seismic response was caused mainly by well water level seismic response.  相似文献