基于抗转模型的颗粒材料宏−细观关系研究     

王一伟  刘润  孙若晗  许泽伟 《岩土力学》2022,43(4):945-956

接触模型的宏?细观参数标定是成功使用离散元方法的关键。在离散元的接触模型中线性接触模型与抗转线性接触模型均可用于模拟砂性土的力学行为,其中抗转线性接触模型在模拟密砂的剪胀性方面具备优势。采用抗转线性接触模型对室内密实砂土三轴试验进行了离散元模拟,验证了抗转线性接触模型的可靠性;进而系统分析了颗粒间摩擦系数、刚度比和抗转动系数等细观参数与砂土峰值内摩擦角、残余内摩擦角、峰值剪胀角等宏观参数的相关关系并进行了验证;揭示了偏应力作用下,细观参数对密实砂土试样内部剪切带宽度与倾角变化的影响规律,提出了考虑剪胀角的剪切带倾角经验公式。通过研究建立了抗转线性接触模型宏?细观参数的量化关系并给出了标定参数的具体流程图,提出了快速标定宏观参数的方法并应用实例进行了验证,为采用抗转线性接触模型精准模拟密实砂土的力学特性提供依据。  相似文献   

椭球面上绘制大地线的算法     

唐红涛  王微  杨永崇  崔笃信  张希 《测绘科学》2015,40(4):7-10

针对传统二维线划图无法表达大区域地理要素的问题,该文提出了一种在椭球面上绘制大地线的算法。以等间距内插空间直线逼近空间曲线这一思想作为基础,通过Bessel大地主题正、反算及克莱劳方程,实现大地线内插与绘制的综合分析与解算。实验结果表明,该方法较好地解决了在参考椭球面上难以精确绘制大地线的问题,对传统地图向三维椭球面线划图的转换与应用具有一定的参考价值。  相似文献   

Study of bond stress–slip relationship and radial dilation in prestressed concrete     

José Mª Benítez  J.C. Gálvez  M.J. Casati 《国际地质力学数值与分析法杂志》2013,37(16):2706-2726

This paper presents two test procedures for evaluating the bond stress–slip and the slip–radial dilation relationships when the prestressing force is transmitted by releasing the steel (wire or strand) in precast prestressed elements. The bond stress–slip relationship is obtained with short length specimens, to guarantee uniform bond stress, for three depths of the wire indentation (shallow, medium and deep). An analytical model for bond stress–slip relationship is proposed and compared with the experimental results. The model is also compared with the experimental results of other researchers. Since numerical models for studying bond‐splitting problems in prestressed concrete require experimental data about dilatancy angle (radial dilation), a test procedure is proposed to evaluate these parameters. The obtained values of the radial dilation are compared with the prior estimated by numerical modelling and good agreement is reached. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Coupled finite‐element simulation of injection well testing in unconsolidated oil sands reservoir     

Bin Xu  Ron C.K. Wong 《国际地质力学数值与分析法杂志》2013,37(18):3131-3149

This paper presents a finite‐element (FE) model for simulating injection well testing in unconsolidated oil sands reservoir. In injection well testing, the bottom‐hole pressure (BHP) is monitored during the injection and shut‐in period. The flow characteristics of a reservoir can be determined from transient BHP data using conventional reservoir or well‐testing analysis. However, conventional reservoir or well‐testing analysis does not consider geomechanics coupling effects. This simplified assumption has limitations when applied to unconsolidated (uncemented) oil sands reservoirs because oil sands deform and dilate subjected to pressure variation. In addition, hydraulic fracturing may occur in unconsolidated oil sands when high water injection rate is used. This research is motivated in numerical modeling of injection well testing in unconsolidated oil sands reservoir considering the geomechanics coupling effects including hydraulic fracturing. To simulate the strong anisotropy in mechanical and hydraulic behaviour of unconsolidated oil sands induced by fluid injection in injection well testing, a nonlinear stress‐dependent poro‐elasto‐plastic constitutive model together with a strain‐induced anisotropic permeability model are formulated and implemented into a 3D FE simulator. The 3D FE model is used to history match the BHP response measured from an injection well in an oil sands reservoir. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

川西北茂县群千枚岩各向异性力学特性     

吴永胜  谭忠盛  喻渝  姜波  余贤斌 《岩土力学》2018,39(1):207-215

利用MTS815Teststar岩石力学试验系统,对川西北茂县群千枚岩开展单轴和三轴试验,研究千枚岩各向异性力学特性。研究结果表明：千枚岩在达到峰值强度50%以前就普遍出现很大的变形和局部破坏,表明围岩产生大变形或出现早期扩容并不意味着其丧失承载能力,如及时进行针对性支护或加强围岩保护仍具有较强的强度。损伤扩容是千枚岩变形破坏的典型特征,并对变形产生不同的影响,横向应变对损伤扩容比轴向应变更敏感,能更灵敏地反映岩石材料内部的屈服、弱化。千枚岩各向异性随含水率与围压水平表现出不同的变化规律,强度各向异性随含水率和围压水平提高而降低,弹性模量和泊松比则与加载方向和转化围压有关。不同含水状态下干燥千枚岩的单轴抗压强度各向异性最为显著,大部分千枚岩的强度各向异性率在0.80以下,其中绢云母千枚岩最强,为0.48,其强弱对比依次为绢云母千枚岩、绿泥石千枚岩、石英千枚岩、炭质千枚岩。千枚岩表现出不同的破坏模式,并随围压或含水率的增加而变化;剪切机制单独控制着各向异性力学特性,千枚岩统一沿软弱面剪切破坏。  相似文献   

昆仑8.1级地震同震形变特征及其对响应地震活动的制约机制          下载免费PDF全文

陈兵  崔笃信  王庆良  张晓亮  王文萍  薛富平  王敏 《地球物理学进展》2009,24(4):1204-1212

本文定义”响应地震”的概念统一表述昆仑山口西8.1级地震所引发的主破裂两侧临近构造及部分块体边界上的显著地震活动.其主体活动区域集中在昆仑地震主破裂的西南侧和东北侧及祁连山断裂.同时,地壳运动在主破裂北侧的甘青块体中西部出现与背景运动场反向的特征性变化,祁连山断裂出现应变弱化.弹性位移-应力阶跃模型模拟结果显示,昆仑地震造成其东北侧甘青块体中西部地壳运动的反向运动(相对背景场).并形成东北部和西南部两个体应变张性区域,绝大部分响应地震都发生在应变张性区中和块体张性边界上.这种强烈挤压剪切背景中出现的相对松弛状态与昆仑地震后青藏块体地震弱活动背景中出现的显著活跃的响应地震活动的正相关性可能反映了断层约束状态的相对减弱对滑动的触发作用.说明在考虑地震发生条件时,不能只着眼于应力场是否增强,断层摩擦强度,或更广义地说,构造约束条件的变化也是一个不容忽视的重要因素.  相似文献   

岩土介质三维快速拉格朗日数值分析方法研究   总被引：12，自引：0，他引：12  

刘建华  朱维申  李术才 《岩土力学》2006,27(4):525-529

研究了FLAC3D（fast lagrangian analysis of continua in 3 dimensions）的特点,并与有限单元法作了比较。FLAC3D方法以结点运动方程为支配方程,追踪了介质从受荷到达到平衡状态的过程,而有限元法是根据介质力学平衡方程直接求解,这是二者主要区别。FLAC3D没有采用介质真实的阻尼特性和结点质量,给出的不是介质所经历的真实过程,不能正确反映过程的影响,因此给出的介质应力和变形计算结果的物理意义是不甚明确的。求解过程中的介质振动,是一种噪音,可引起弹塑性介质计算结果误差,而弹性介质的计算结果几乎不受影响。研究指出了FLAC3D方法的优缺点。还通过算例作了四个方面的研究：(1) Drucker-Prager屈服准则与Mohr-Coulomb屈服准则比较;(2) 膨胀角取值对计算结果的影响;(3) 大变形与小变形对计算结果的影响;(4) 精度设置对计算结果的影响。研究表明,Drucker-Prager准则与Mohr-Coulomb准则结果差异颇大;膨胀角取值对结果的影响是敏感和显著的;一般情况下,取小变形模式是合适的,计算精度取10-5是足够的。  相似文献   

损伤和剪胀效应对裂隙煤体渗透率演化规律的影响研究     

魏明尧  王春光  崔光磊  檀玉玲  张守文 《岩土力学》2016,37(2):574-582

煤层瓦斯渗透率是影响瓦斯抽采和动力灾害防治的重要参数。为了研究煤体损伤和剪胀变形对渗透率的影响,首先引入损伤变量反映煤体损伤破坏状态,建立了基于体应变增量的煤体损伤本构模型。并采用Hurst指数表征裂隙表面粗糙度,基于裂隙表面的分形特征,建立了裂隙渗透率在压缩和剪切作用下的演化模型。通过对TOUGH2和FLAC3D软件进行二次开发,建立了基于双重孔隙模型的TOUGH2(CH4)-FLAC气-固耦合数值分析工具。采用本软件对煤样单轴压缩过程进行模拟分析,结果表明：煤体的破坏是损伤单元累积和贯通的结果,最终形成贯通煤体的损伤带是造成煤体失稳破坏的主因;围岩内的渗透率增加区域与损伤区位置基本一致,其中裂隙系统的渗透率增加幅度最大可达2个数量级;剪切破坏区的裂隙发生剪胀变形,引起裂隙渗透率大幅增加。建立的理论模型与数值计算工具为制定瓦斯治理措施提供了理论指导。  相似文献   

椭球面三角形外接大地圆圆心测地坐标的另一种解法     

李雪凝  施一民 《测绘工程》2005,14(2):13-14,28

为了在测地坐标系中确定外接大地圆圆心,采用了解非线性方程组的牛顿迭代法,解法简便,易于理解.数据验证表明,由该数值法求解的结果与由解析公式获得的结果完全一致.由此亦表明,一些繁难的大地测量计算也可改用数值法来进行.  相似文献   

A simple mathematical model for soil nail and soil interaction analysis   总被引：1，自引：0，他引：1  

Wan-Huan Zhou  Jian-Hua Yin   《Computers and Geotechnics》2008,35(3):479-488

Soil nails have been widely used to stabilize slopes and earth retaining structures in many countries and regions, especially, in Hong Kong. The analysis of the interaction between a soil nail and the surrounding soil is of great interests to both design engineers and researchers. In this paper, authors present a simple mathematical model for the interaction analysis of a soil nail and the surrounding soil considering a few key factors which are soil dilation, bending of the soil nail, vertical pressure, and non-linear subgrade reaction stiffness. The lateral subgrade reaction between the soil and the soil nail is assumed to obey a hyperbolic relation. Reported test data in the literature are used to verify the present model. The contributions of the soil-nail bending on the pull-out resistance are evaluated in two case studies.  相似文献